International Journal of Iron & Steel Society of Iran

International Journal of Iron & Steel Society of Iran

Keyword Index
A
  • Abrasive wear Investigating the contribution of wear caused by impact and abrasion in semi autogenous grinding mills [Volume 19, Issue 2, 2022, Pages 59-65]
  • Aggressiveness index Investigation on the Water Index Stability in the Direct Reduced Iron(DRI) Plant-ARFA Iron and Steelmaking Company [Volume 19, Issue 1, 2022, Pages 81-85]
  • Aluminum The optimization of the aluminum deoxidation process to reduce non-metallic inclusions in steel products [Volume 19, Issue 1, 2022, Pages 1-7]
  • Annealing Recrystallization Kinetics of the ECAP processed stainless steel 316L [Volume 19, Issue 1, 2022, Pages 38-46]
  • Ansys fluent Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
  • Arrhenius equation Phenomenological Arrhenius type constitutive equation for a 304 stainless steel during hot deformation [Volume 19, Issue 2, 2022, Pages 12-21]
C
  • Carburization Microstructure and Mechanical Properties of Service-Exposed HP-MA Heat-Resistant Steel Tube, Used in Cracking Furnaces [Volume 19, Issue 2, 2022, Pages 51-58]
  • CK45 steel A simple metallographic techniques for revealing austenite grain boundaries in CK45 steel [Volume 19, Issue 2, 2022, Pages 1-4]
  • Clean steel The optimization of the aluminum deoxidation process to reduce non-metallic inclusions in steel products [Volume 19, Issue 1, 2022, Pages 1-7]
  • Coefficient K The Effect of Slab Thickness on the Solidification of Low carbon Steel in Continuous Casting Process: A Simulation Case Study [Volume 19, Issue 1, 2022, Pages 67-80]
  • Contact angle" Effect of CaF2 on the contact angle of refining powder on NiCrMoV steel at high temperature using Image Analysis and Statistical Package for the Social Sciences software [Volume 19, Issue 2, 2022, Pages 5-11]
  • Continuous casting Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
  • Cracking Tubes Microstructure and Mechanical Properties of Service-Exposed HP-MA Heat-Resistant Steel Tube, Used in Cracking Furnaces [Volume 19, Issue 2, 2022, Pages 51-58]
  • Critical plane approach Torsional Fatigue Life Estimation for Steel Thin-Wall Specimens Considering Crack Initiation Phase [Volume 19, Issue 1, 2022, Pages 30-37]
D
  • Deoxidation The optimization of the aluminum deoxidation process to reduce non-metallic inclusions in steel products [Volume 19, Issue 1, 2022, Pages 1-7]
  • DRI Influence of geometric shape of sponge iron used in induction furnace on metallurgical properties of produced steel [Volume 19, Issue 1, 2022, Pages 15-19]
  • DRI: Steel:Green Steel: Sponge Iron: HDRI: EAF Evaluation of the production of DRI in the world and Iran in 2021 [Volume 19, Issue 1, 2022, Pages 55-66]
  • Dynamic recrystallization Phenomenological Arrhenius type constitutive equation for a 304 stainless steel during hot deformation [Volume 19, Issue 2, 2022, Pages 12-21]
F
  • Failure Effects Failure Modes Analysis System in Casting Parts by Process Failure Mode Effects Analysis (PFMEA) Method [Volume 19, Issue 2, 2022, Pages 43-50]
  • FGM Analytical and numerical instability analysis of functionally graded low-carbon steel [Volume 19, Issue 2, 2022, Pages 66-72]
  • Fluid dynamics Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
  • FMEA Failure Modes Analysis System in Casting Parts by Process Failure Mode Effects Analysis (PFMEA) Method [Volume 19, Issue 2, 2022, Pages 43-50]
G
  • Gas Metal arc welding Experimental Study of Mechanical Properties and Hardness in Gas Metal Arc Welding on SUH 310S Steel Using Response Surface Methodology [Volume 19, Issue 2, 2022, Pages 33-42]
  • Gas Price The empirical Test of price Volatility and the volatilities Spillover between the Energy(oil and gas) and Steel [Volume 19, Issue 2, 2022, Pages 73-83]
  • Gradient grain size Analytical and numerical instability analysis of functionally graded low-carbon steel [Volume 19, Issue 2, 2022, Pages 66-72]
  • Grain size Recrystallization Kinetics of the ECAP processed stainless steel 316L [Volume 19, Issue 1, 2022, Pages 38-46]
H
  • H2SO4 corrosion A comparison between the corrosion behavior of 316L stainless steel manufactured by rolling and laser powder bed fusion in 0.1 M H2SO4 solution [Volume 19, Issue 1, 2022, Pages 47-54]
  • Heat-resistant steels Microstructure and Mechanical Properties of Service-Exposed HP-MA Heat-Resistant Steel Tube, Used in Cracking Furnaces [Volume 19, Issue 2, 2022, Pages 51-58]
  • Heat transfer simulation The Effect of Slab Thickness on the Solidification of Low carbon Steel in Continuous Casting Process: A Simulation Case Study [Volume 19, Issue 1, 2022, Pages 67-80]
  • Hot deformation Phenomenological Arrhenius type constitutive equation for a 304 stainless steel during hot deformation [Volume 19, Issue 2, 2022, Pages 12-21]
  • HP-MA steel Microstructure and Mechanical Properties of Service-Exposed HP-MA Heat-Resistant Steel Tube, Used in Cracking Furnaces [Volume 19, Issue 2, 2022, Pages 51-58]
I
  • Image analysis The optimization of the aluminum deoxidation process to reduce non-metallic inclusions in steel products [Volume 19, Issue 1, 2022, Pages 1-7]
  • Impact wear Investigating the contribution of wear caused by impact and abrasion in semi autogenous grinding mills [Volume 19, Issue 2, 2022, Pages 59-65]
  • Initial crack length Torsional Fatigue Life Estimation for Steel Thin-Wall Specimens Considering Crack Initiation Phase [Volume 19, Issue 1, 2022, Pages 30-37]
L
  • Langelier saturation index Investigation on the Water Index Stability in the Direct Reduced Iron(DRI) Plant-ARFA Iron and Steelmaking Company [Volume 19, Issue 1, 2022, Pages 81-85]
  • Low alloy steel NiCrMoV" Effect of CaF2 on the contact angle of refining powder on NiCrMoV steel at high temperature using Image Analysis and Statistical Package for the Social Sciences software [Volume 19, Issue 2, 2022, Pages 5-11]
  • Low-carbon steel Analytical and numerical instability analysis of functionally graded low-carbon steel [Volume 19, Issue 2, 2022, Pages 66-72]
M
  • Mechanical properties Investigating the effect of distance of carbon steel particles from the impacted surface on mechanical properties in SMAT process of AZ31 using molecular dynamics [Volume 19, Issue 1, 2022, Pages 8-14]
  • Mechanical properties Experimental Study of Mechanical Properties and Hardness in Gas Metal Arc Welding on SUH 310S Steel Using Response Surface Methodology [Volume 19, Issue 2, 2022, Pages 33-42]
  • Medium silicon low alloy steel Effect of tempering heat treatment on mechanical properties of a medium silicon low alloy ferrite–martensite DP steel [Volume 19, Issue 1, 2022, Pages 20-29]
  • Melting Run Out Failure Modes Analysis System in Casting Parts by Process Failure Mode Effects Analysis (PFMEA) Method [Volume 19, Issue 2, 2022, Pages 43-50]
  • Metallurgical length The Effect of Slab Thickness on the Solidification of Low carbon Steel in Continuous Casting Process: A Simulation Case Study [Volume 19, Issue 1, 2022, Pages 67-80]
  • Mg-based AZ31 Alloy Investigating the effect of distance of carbon steel particles from the impacted surface on mechanical properties in SMAT process of AZ31 using molecular dynamics [Volume 19, Issue 1, 2022, Pages 8-14]
  • Microstructure A simple metallographic techniques for revealing austenite grain boundaries in CK45 steel [Volume 19, Issue 2, 2022, Pages 1-4]
  • Molecular Dynamics Approach Investigating the effect of distance of carbon steel particles from the impacted surface on mechanical properties in SMAT process of AZ31 using molecular dynamics [Volume 19, Issue 1, 2022, Pages 8-14]
N
  • Numerical Modeling Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
O
  • Oil Price The empirical Test of price Volatility and the volatilities Spillover between the Energy(oil and gas) and Steel [Volume 19, Issue 2, 2022, Pages 73-83]
  • Optimization Experimental Study of Mechanical Properties and Hardness in Gas Metal Arc Welding on SUH 310S Steel Using Response Surface Methodology [Volume 19, Issue 2, 2022, Pages 33-42]
  • Oxidation Microstructure and Mechanical Properties of Service-Exposed HP-MA Heat-Resistant Steel Tube, Used in Cracking Furnaces [Volume 19, Issue 2, 2022, Pages 51-58]
  • Oxidation etching A simple metallographic techniques for revealing austenite grain boundaries in CK45 steel [Volume 19, Issue 2, 2022, Pages 1-4]
P
  • Prior austenite grain boundary A simple metallographic techniques for revealing austenite grain boundaries in CK45 steel [Volume 19, Issue 2, 2022, Pages 1-4]
  • Puckorius Scaling Index Investigation on the Water Index Stability in the Direct Reduced Iron(DRI) Plant-ARFA Iron and Steelmaking Company [Volume 19, Issue 1, 2022, Pages 81-85]
R
  • Refining powder" Effect of CaF2 on the contact angle of refining powder on NiCrMoV steel at high temperature using Image Analysis and Statistical Package for the Social Sciences software [Volume 19, Issue 2, 2022, Pages 5-11]
  • Response surface methodology Experimental Study of Mechanical Properties and Hardness in Gas Metal Arc Welding on SUH 310S Steel Using Response Surface Methodology [Volume 19, Issue 2, 2022, Pages 33-42]
  • Ryznar index Investigation on the Water Index Stability in the Direct Reduced Iron(DRI) Plant-ARFA Iron and Steelmaking Company [Volume 19, Issue 1, 2022, Pages 81-85]
S
  • Semi autogenous grinding mill Investigating the contribution of wear caused by impact and abrasion in semi autogenous grinding mills [Volume 19, Issue 2, 2022, Pages 59-65]
  • SMAT Time Investigating the effect of distance of carbon steel particles from the impacted surface on mechanical properties in SMAT process of AZ31 using molecular dynamics [Volume 19, Issue 1, 2022, Pages 8-14]
  • Sponge iron Influence of geometric shape of sponge iron used in induction furnace on metallurgical properties of produced steel [Volume 19, Issue 1, 2022, Pages 15-19]
  • SPSS analysis" Effect of CaF2 on the contact angle of refining powder on NiCrMoV steel at high temperature using Image Analysis and Statistical Package for the Social Sciences software [Volume 19, Issue 2, 2022, Pages 5-11]
  • Stainless steel A comparison between the corrosion behavior of 316L stainless steel manufactured by rolling and laser powder bed fusion in 0.1 M H2SO4 solution [Volume 19, Issue 1, 2022, Pages 47-54]
  • Stainless steel 316L Recrystallization Kinetics of the ECAP processed stainless steel 316L [Volume 19, Issue 1, 2022, Pages 38-46]
  • Steel making Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
  • Steel Price The empirical Test of price Volatility and the volatilities Spillover between the Energy(oil and gas) and Steel [Volume 19, Issue 2, 2022, Pages 73-83]
  • Steel thin-wall specimen Torsional Fatigue Life Estimation for Steel Thin-Wall Specimens Considering Crack Initiation Phase [Volume 19, Issue 1, 2022, Pages 30-37]
  • Stephan problem The Effect of Slab Thickness on the Solidification of Low carbon Steel in Continuous Casting Process: A Simulation Case Study [Volume 19, Issue 1, 2022, Pages 67-80]
  • Strength coefficient Analytical and numerical instability analysis of functionally graded low-carbon steel [Volume 19, Issue 2, 2022, Pages 66-72]
  • SUH 310S steel Experimental Study of Mechanical Properties and Hardness in Gas Metal Arc Welding on SUH 310S Steel Using Response Surface Methodology [Volume 19, Issue 2, 2022, Pages 33-42]
T
  • Tempering Effect of tempering heat treatment on mechanical properties of a medium silicon low alloy ferrite–martensite DP steel [Volume 19, Issue 1, 2022, Pages 20-29]
  • Tundish Effect of melt height and obstacle on fluid dynamics in six-strand tundish: A numerical study [Volume 19, Issue 2, 2022, Pages 22-32]
V
  • Volatility Spillover The empirical Test of price Volatility and the volatilities Spillover between the Energy(oil and gas) and Steel [Volume 19, Issue 2, 2022, Pages 73-83]
W
  • Wear of lifter Investigating the contribution of wear caused by impact and abrasion in semi autogenous grinding mills [Volume 19, Issue 2, 2022, Pages 59-65]
  • Wet grinding Investigating the contribution of wear caused by impact and abrasion in semi autogenous grinding mills [Volume 19, Issue 2, 2022, Pages 59-65]
Z
  • Zener-Hollomon parameter Phenomenological Arrhenius type constitutive equation for a 304 stainless steel during hot deformation [Volume 19, Issue 2, 2022, Pages 12-21]