Abbasi, M. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
Abbasi, M. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
Abbasi, M. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Abdollah, S. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
Aghaei, A. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
Akbarzadeh, M. Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
Alishahi, M. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
Alizadeh, M. Effect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel [Volume 9, Issue 2, 2012, Pages 27-31]
Amini, K. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
Amirfattahi, R. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
B
Baibordi, A. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
Bataille, A. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
Bina, M. H.Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
D
Dehghan, A. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
E
Ebrahimi, R. Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
F
Fadavi, M. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Farahani, H. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
Fattah-alhosseini, A. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
H
Hajiannia, I. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
I
Imantalab, O. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
K
Karamian, E. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
Kasiri, M. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
Kermanpur, A. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
Kermanpur, A. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
Kermanpur, A. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Khosravifard, A. Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
M
Malekian, V. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
Mazaheri, Y. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
Mazaheri, Y. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Moayerifar, E. Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening [Volume 9, Issue 2, 2012, Pages 5-8]
Monirvaghefi, S. M.The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
Moosalu, H. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
Moshksar, M. M.Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
N
Najafizadeh, A. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
Najafizadeh, A. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
Najafizadeh, A. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Noori Teymorlu, A. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
P
Parvini Ahmadi, N. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
R
Rahimi, P. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
Rezaeian, M. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
S
Saatchi, A. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
Saeedipour, S. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
Saeedipour, S. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
Salimijazi, H. R.Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
Shafyei, A. Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
Shamanian, M. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
Shoja Razavi, R. Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening [Volume 9, Issue 2, 2012, Pages 5-8]
Y
Yazdani, S. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
