Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657
[1] G. Belloni, G. Caironi, A. Gariboldi, A. Lo Conte, Trans. SMiRT 16,WashingtonDC, August 2001, Paper 1546.
[2] R. Kacar, O. Baylan, Mater. Design, 25(2004). 317.
[3] W. Y. Lu, M. F. Horstemeyer, J. S. Korellis, R. B. Grishabr, D. Mosher, Theor. Appl. Fract. Mec. 30(1998), 139.
[4] C. A. Huanga, T. H. Wang, C. H. Lee, W. C. Han, Mater. Sci.Eng.A, 398(2005), 275.
[5] R. C. Yin, A. A. Al-Refaie, B. Al-Yami, A. K. Bairamov, Eng. Failu. Analy. 12(2005), 413.
[6] Li. Jian, C. Y. Yuh, M. Farooque, Corr. Sci., 42(2000), 1573.
[7] S. Zhao, X. Xiea, G. D. Smith,Sur.Coat. Tech.185(2004), 178.
[8] J. N. Dupont, S. W. Banovic, A. R. Marder, Weld. J. 82(2003), 125s.
[9] M. Sireesha, V. Shankar, K. Albert Shaju, S. Sundaresan, Mater. Sci.Eng.A, 292(2000), 74.
[10] M. Sireesha, K. Albert Shaju, V. Shankar, S. Sundaresan, J. Nucl. Mater., 279(2000), 65.
[11] T-Y. Kuo, H-T. Lee, Mater. Sci.Eng.A, 338(2002), 202.
[12] H. T. Lee, S. L. Jeng, C. H. Yen, T. Y. Kuo, J. Nucl. Mater., 335(2004), 59.
[13] M. D. Rowe, P. Crook, G. L. Hoback, Weld. J., 82(2003), 313s.
)