[1] Kulawinski D, Henkel S, Holländer D, Thiele M,Gampe U, Biermann H, Fatigue behavior of the nickel-base superalloy Waspaloy™ under proportional biaxial-planar loading at high temperature, Int J Fatigue. 2014; 67: 212-9.
[2] Liu G, Kong L, Xiao X, Birosca S, Microstructure evolution and phase transformation in a nickel-based superalloy with varying Ti/Al ratios: Part 1-Microstructure evolution, Mater Sci Eng A. 2022; 831: 142228.
[3] Chen X, Yao Z, Dong J, Shen H, Wang Y, The effect of stress on primary MC carbides degeneration of Waspaloy during long term thermal exposure, J Alloys Compd. 2018; 735: 928-37.
[4] Wang H, Liu D, Wang J, Yang Y, Wang L, Wang H, et al. Role of size and amount of γ' phase on creep properties of Waspaloy, Mater Charact. 2021; 181: 111498.
[5] Chang K.M, Liu X, Effect of γ′ content on the mechanical behavior of the Waspaloy alloy system, Mater Sci Eng A. 2001; 308: 1-8.
[6] Polkowska A, Lech S, Polkowski W, The effect of cold rolling degree on microstructure, crystallographic texture and mechanical properties of Haynes® 282® wrought nickel superalloy, Mater Sci Eng A. 2020; 787: 139478.
[7] Dieter G.E, Mechanical Metallurgy. 3rd ed. New York: McGraw-Hill Book Co.; 1986.
[8] John V.B, Testing of Materials. 2nd ed. London: Macmillan Education LTD; 1992.
[9] Stefan O, Wretland A, Sjöberg G, The effect of grain size and hardness of Waspaloy on the wear of cemented carbide tools, Int J Adv Manuf Technol. 2010; 50: 907- 15.
[10] Whelchel R.L, Kelekanjeri V.G, Gerhardt R.A, Ilavsky J, Effect of aging treatment on the microstructure and resistivity of a nickel-base superalloy, Metall Mater Trans A. 2011; 42: 1362-72.
[11] AMS 5544. Aerospace Material Specification. AMS International; 2000.
[12] AMS 5707J. Aerospace Material Specification. ASTM International; 2000. ASTM E8. Standard test method for tension testing of metallic materials. West Conshohocken: ASTM International; 2004.
[13] ASTM E139. Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials. ASTM International; 2011.
[14] Geddes B. Superalloys: Alloying and Performance. 1st ed. USA: ASM International; 2010.
[15] Humphreys F.J, Hatherly M, Recrystallization and related annealing phenomena. 1st ed. London: Elsevier; 2012.
[16] Jiang H, Xiang X, Dong J, The morphology and characteristics evolution of MC carbide during homogenization in hard-to-deform superalloy GH4975, J Alloys Compd. 2022; 929: 167086.
[17] Liu H, Zhao X, Dong J, Zheng L, Inhomogeneous planar distribution of γ′ precipitates in Waspaloy caused by local spatial consumption of MC carbides, J Mater Eng Perform. 2022; 31: 1397-404.
[18] Seetharaman V, Rao K.B.S, Mannan S.L, Rodriguez P, Microstructure and mechanical properties of a Nimonic PE 16 superalloy subjected to double-aging treatments, Mater Sci Eng A. 1984; 63(1): 35-50.
[19] Caliari F.R, Candioto K.C, Couto A.A, Nunes C.Â, Reis D.A, Effect of double aging heat treatment on the short-term creep behavior of the Inconel 718, J Mater Eng Perform. 2016; 25: 2307-17.
[20] Liu H, Zhang M, Xu M, Meng Y, Xu G, Ta N, et al. Microstructure evolution dependence of work-hardening characteristic in cold deformation of a difficult-to-deform nickel-based superalloy, Mater Sci Eng A. 2021; 800: 140280.
[21] Ran R, Wang Y, Zhang Y.X, Fang F, Wang H.S, Yuan G, et al. Microstructure, precipitates and mechanical properties of Inconel 718 alloy produced by two-stage cold rolling method, Mater Sci Eng A. 2020; 793: 139860.
[22] Song X, Wang Y, Zhao X, Zhang J, Li Y, Wang Y, et al. Analysis of carbide transformation in MC-M23C6 and its effect on mechanical properties of Ni-based superalloy, J Alloys Compd. 2022; 911: 164959.
[23] Liu G, Kong L, Xiao X, Birosca S, Microstructure evolution and phase transformation in a nickel-based superalloy with varying Ti/Al ratios: Part 2–Phase transformation, Mater Sci Eng A. 2022; 831: 142229. [24] Zhang S.H, Ye N.Y, Cheng M, Song H.W, Zhou H, Wang P.B, Effect of cold rolling and heat treatment on the mechanical properties of GH4169 alloy sheet at room temperature, Metals. 2015; 6(1): 1-11.
[25] Liu J, Zhang W, Mei F, Xin X, Cao Y, Zhu C, et al. Microstructure evolution and work hardening behaviour during cold deformation of Haynes 214 superalloy, J Mater Res Technol. 2023; 24: 5792-804.
[26] Zhang X.Y, Li H.P, Bai J.M, Li X.K, Jia J, Liu C.S, et al. The evolution of γ′ precipitates and hardness response of a novel PM Ni-based superalloy during thermal exposure, J Alloys Compd. 2023; 168757.
[27] Yamaguchi Y, Tajima R, Terada Y, Evolution of γ′ precipitates for wrought Ni-based superalloys, Mater Trans. 2020; 61(11): 2185-94.
[28] Bessa S.M, de Oliveira C.A, Effects of a high temperature artificial aging on microstructure and mechanical properties of the Ni-base superalloy GTD- 111, Mater Charact. 2023; 201: 112966.
[29] Sujata M, Madan M, Raghavendra K, Venkataswamy M.A, Bhaumik S.K, Identification of failure mechanisms in nickel base superalloy turbine blades through microstructural study, Eng Fail Anal. 2010; 17(6): 1436- 46.
[30] Lee T.H, Suh H.Y, Lee J.H. Precipitation behavior of M 23C6 carbides and its effect on mechanical properties of Ni-based Alloy 690, J Nucl Sci Technol. 2021; 58(1): 45-50.
[31] Peng T, Wang Y, Yang B, Yang G, Tensile properties and deformation mechanisms of Nimonic 105 superalloy at different temperatures, Mater Sci Eng A. 2021; 828: 142028.
[32] Cui L, Su H, Yu J, Liu J, Jin T, Sun X, Temperature dependence of tensile properties and deformation behaviors of nickel-base superalloy M951G, Mater Sci Eng A. 2017; 696: 323-30.
[33] Zhang P, Yuan Y, Yin H, Gu Y, Wang J, Yang M, et al. Tensile properties and deformation mechanisms of Haynes 282 at various temperatures, Metall Mater Trans A. 2018; 49: 1571-8.
[34] Brassart L, Delannay F, Bounds for shear viscosity in Nabarro–Herring–Coble creep, Mech Mater. 2019; 137: 103106.
[35] Brassart L, Delannay F, Bounds for shear viscosity in Nabarro–Herring–Coble creep, Mech. 2019; 137: 103106.
