[1] Satoh G, Yao Y.L, Qiu C, Strength and microstructure of laser fusion-welded Ti–SS dissimilar material pair, Int J Adv Manuf Technol. 2013; 66: 469–79.
[2] Okamoto H, et al. ASM Handbook: Alloy Phase Diagrams. Vol. 3. ASM International Handbook Committee; 2016.
[3] Zhang Y, Sun D.Q, Gu X.Y, Liu Y.J, Nd:YAG pulsed laser welding of TC4 titanium alloy to 301L stainless steel via pure copper interlayer, Int J Adv Manuf Technol. 2017; 90: 953–61.
[4] Wang T, Zhang B, Feng J, Influences of different filler metals on electron beam welding of titanium alloy to stainless steel, Trans Nonferrous Met Soc China. 2014; 24: 108–14.
[5] Zhang B, Wang T, Duan X.H, Chen G.Q, Feng J.C, Temperature and stress fields in electron beam welded Ti-15-3 alloy to 304 stainless steel joint with copper interlayer sheet, Trans Nonferrous Met Soc China. 2012; 22: 398–403.
[6] Szymlek K, Review of titanium and steel welding methods, Adv Mater Sci. 2008; 8(1): 186.
[7] Hiraga H, Fukatsu K, Ogawa K, Nakayama M, Muto Y. Nd:YAG laser welding of pure titanium to stainless steel, Weld Int. 2002; 16(8): 623–31.
[8] Yue X, He P, Feng J.C, Zhang J.H, Zhu F.Q, Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal, Mater Charact. 2008; 59: 1721–7.
[9] Tomashchuk I, Grevey D, Sallamand P, Dissimilar laser welding of AISI 316L stainless steel to Ti-6Al-4V alloy via pure vanadium interlayer, Mater Sci Eng A. 2015; 622: 37–45.
[10] Shanmugarajan B, Padmanabham G, Fusion welding studies using laser on Ti–SS dissimilar combination, Opt Laser Eng. 2012; 50: 1621–7.
[11] Gao M, Mei S.W, Wang Z.M, Li X.Y, Zeng X.Y, Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer, Sci Technol Weld Join. 2012; 17(4): 269–76.
[12] Kutsuna M, Ichioka R, Dissimilar metal joining of steel and titanium by laser roll welding. Weld World. 2007; 51: 5–8.
[13] Seretsky J, Ryba E.R, Laser welding of dissimilar metals: Titanium to Nickel, Weld Res Suppl. 1976; (184): 208–11.
[14] Elmi Hosseini S.R, Feng K, Nie P, Zhang K, Huang J, Li Z, et al. Enhanced strength of 304 SS-Ti6Al4V laser-welded joints containing composite interlayers, J Mater Eng Perform. 2018; 27(11): 6135–48.
[15] Gao M, Chen C, Wang L, Wang Z, Zeng X, Laser-arc hybrid welding of dissimilar titanium alloy and stainless steel using copper wire, Metall Mater Trans A. 2015; 46: 2007–20.
[16] Sahasrabudhe H, Harrison R, Carpenter C, Bandyopadhyay A, Stainless steel to titanium bimetallic structure using LENS™, Addit Manuf. 2015; 5: 1–8.
[17] Tomashchuk I, Sallamand P, Belyavina N, Pilloz M, Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interlayer, Mater Sci Eng A. 2013; 585: 114–22.
[18] Chen S, Zhang M, Huang J, Cui C, Zhang H, Zhao X, Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel, Mater Des. 2014; 53: 504–11.
[19] Wang T, Zhang B, Chen G, Feng J, High strength electron beam welded titanium-stainless steel joint with V/Cu based composite filler metals, Mater Des. 2013; 94: 41–7.
[20] Mohid Z, Dissimilar materials laser welding characteristics of stainless steel and titanium alloy, Appl Mech Mater. 2014; 465-466: 1060–4.
[21] MatWeb - Material Property Data. Available from: www.matweb.com
[22] Pardal G, Ganguly S, Williams S, Vaja J, Dissimilar metal joining of stainless steel and titanium using copper as transition metal, Int J Adv Manuf Technol. 2016; 86: 1139–50.
[23] Elmi Hosseini S.R, Feng K, Nie P, Zhang K, Huang J, Chen Y, et al. Fracture surface characterization of laser welding processed Ti alloy to stainless steel joints, Weld World. 2018; 62(5): 947–60.
[24] Lee M.K, Lee J.G, Lee J.K, Hong S.M, Lee S.H, Park J.J, et al. Formation of interfacial brittle phases sigma phase and IMC in hybrid titanium-to-stainless steel joint, Trans Nonferrous Met Soc China. 2011; 21: 7–11.
[25] Zhang B, Wang T, Chen G, Feng J, Contact reactive joining of TA15 and 304 stainless steel via a copper interlayer heated by electron beam with a beam deflection, J Mater Eng Perform. 2012; 21: 2067–73.
[26] Groza C, Mitelea I, Uțu I, Crăciunescu C.M, Melted zone morphology by laser welding of Ti-6Al-4V with X5CrNi18-10, Int Conf Metall Mater. 2012; 113: 73–82.
[27] Ting W, Binggang Z, Jicai F, Qi T, Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium–stainless steel joint, Mater Charact. 2012; 73: 104–13.
[28] Hou L, Qiu R, Cui L, Shen Z, Li Q, Microstructure and mechanical property of resistance spot welded joint between pure titanium and stainless steel with interlayer of Nb, Int Conf Adv Des Manuf Eng. 2015: 782–7.
[29] Gnyusov S.F, Klimenov V.A, Alkhimov Y.V, Budnitskii A.D, Orishich A.M, Cherepanov A.N, et al. Formation of the structure of titanium and stainless steel in laser welding, Weld Int. 2013; 27(4): 295–9.
[30] Cherepanov A.N, Orishich A.M, Mali V.I, Laser welding of stainless steel with a titanium alloy with the use of a multilayer insert obtained in an explosion. Combust Explos Shock Waves. 2014; 50(4): 483–7.
[31] Yefei G, Takuya T, Kazuhiro N, Dissimilar welding of titanium alloys to steels, Trans JWRI. 2012; 41(2): 7–12.
[32] Zhao D.S, Yan J.C, Liu Y.J, Ji Z.S, Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer, Trans Nonferrous Met Soc China. 2014; 24: 2839–44.
[33] He P, Zhang J.H, Li X.Q, Diffusion bonding of titanium alloy to stainless steel wire mesh, Mater Sci Technol. 2001; 17: 1158–62.
[34] He P, Zhang J, Zhou R, Li X, Diffusion bonding technology of a titanium alloy to a stainless steel web with an Ni interlayer, Mater Charact. 1999; 43: 287–92. [35] Balasubramanian M, Application of Box–Behnken design for fabrication of titanium alloy and 304 stainless steel joints with silver interlayer by diffusion bonding, Mater Des. 2015; 77: 161–9.
[36] Vigraman T, Ravindran D, Narayanasamy R, Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti–6Al–4V and AISI 304L, Mater Des. 2012;36:714–27.
[37] Yan J.C, Zhao D.S, Wang C.W, Wang L.Y, Wang Y, Yang S.Q, Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer, Mater Sci Technol. 2009; 25(7): 914–8.
[38] Ishida K, Gao Y, Nagatsuka K, Takahashi M, Nakata K, Microstructures and mechanical properties of friction stir welded lap joints of commercially pure titanium and 304 stainless steel, J Alloys Compd. 2015; 630: 172–7.
[39] Kahraman N, Findik G.F, Joining of titanium/ stainless steel by explosive welding and effect on interface, J Mater Process Technol. 2005; 169: 127–33.
[40] Wang T, Zhang B, Chen G, Feng J, Tang Q, Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with copper interlayer sheet, Iran J Iron Steel. 2010; 20: 1829–34.
[41] Tomashchuk I, Sallamand P, Andrzejewski H, Grevey D, The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI 316L electron beam and Nd:YAG laser joints, Intermetallics. 2011; 19: 1466–73.
[42] Wang T, Zhang B, Wang H, Feng J, Microstructures and mechanical properties of electron beam-welded titanium-steel joints with vanadium, nickel, copper and silver filler metals, J Mater Res Technol. 2014; 23: 1498– 504.
[43] Zhang Y, Sun D, Gu X.Y, Li H, A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding, Mater Lett. 2016; 185: 152–5.
[44] Chen H.C, Bi G, Lee B.Y, Cheng C.H.K, Laser welding of CP Ti to stainless steel with different temporal pulse shapes, J Mater Process Technol. 2016; 231: 58–65.
[45] Cherepanov A.N, Orishich A.M, Pugacheva N.B, Shapeev V.P, Investigation of the structure and properties of titanium-stainless steel permanent joints obtained by laser welding with the use of intermediate inserts and nanopowders, Thermophys Aeromech. 2015; 22(2): 135–42.
[46] Kundu S, Chatterjee S, Diffusion bonding between commercially pure titanium and micro-duplex stainless steel, Mater Sci Eng A. 2008; 480: 316–22.
[47] Sam S, Kundu S, Chatterjee S, Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: interface microstructure and strength properties, Mater Des. 2012; 40: 237–44.
[48] Kundu S, Anand G, Chatterjee S, Diffusion bonding of 17-4 precipitation hardening stainless steel to Ti alloy with and without Ni alloy interlayer: interface microstructure and mechanical properties, Metall Mater Trans A. 2013; 44: 2196–211.
[49] Kundu S, Sam S, Chatterjee S, Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti–6Al–4V alloy to microduplex stainless steel, Mater Sci Eng A. 2011; 528: 4910–6.
[50] Kundu S, Sam S, Chatterjee S, Interface microstructure and strength properties of Ti–6Al–4V and microduplex stainless steel diffusion bonded joints, Mater Des. 2011; 32: 2997–3003.
[51] Bhola S.M, Kundu S, Bhola R, Mishra B, Chatterjee S, Electrochemical study of diffusion bonded joints between micro-duplex stainless steel and Ti6Al4V alloy, J Mater Sci Technol. 2014; 30(2): 163–71.
[52] Kundu S, Ghosh M, Chatterjee S, Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel, Mater Sci Eng A. 2006; 428: 18–23.
[53] Kundu S, Chatterjee S, Interfacial microstructure and mechanical properties of diffusion-bonded titanium– stainless steel joints using a nickel interlayer, Mater Sci Eng A. 2006; 425: 107–13.
[54] Kundu S, Chatterjee S, Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer, Mater Charact. 2008; 59: 631–7.
[55] Zhao D.S.H, Yan G.C.H, Liu Y, Effect of intermetallic compounds on heat resistance of hot roll bonded titanium alloy-stainless steel transition joint, Trans Nonferrous Met Soc China. 2013; 23: 1966–70.
[56] Atasoy E, Kahraman N, Diffusion bonding of commercially pure titanium to low carbon steel using a silver interlayer, Mater Charact. 2008; 59: 1481–90.
[57] Yu C, Wu M.F, Lu H, Factors influencing formation and growth of coarse Ti–Fe compound in Ti–Fe eutectic reaction, Sci Technol Weld Join. 2006; 11(3): 265–70.
[58] Elrefaey A, Tillmann W, Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer, J Mater Process Technol. 2009; 209: 2746–52.
[59] Elrefaey A, Tillmann W, Characterization of titanium/steel joints brazed in vacuum. Weld J. 2008; 87: 113–8.
[60] He P, Yue X, Zhang J.H, Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer, Mater Sci Eng A. 2008; 486: 171–6.
[61] Laik A, Shirzadi A.A, Tewari R, Jayakumar T, Dey G.K, Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium, Metall Mater Trans A. 2013; 44: 2212–25.
[62] Fazel-Najafabadi M, Kashani-Bozorg S.F, Zarei-Hanzaki A, Joining of CP-Ti to 304 stainless steel using friction stir welding technique, Mater Des. 2010; 31: 4800–7.
[63] Zakipour S, Halvaee A, Amadeh A.A, Samavatian M, Khodabandeh A.R, An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316L to Ti–6Al–4V, J Alloys Compd. 2015; 626: 269–76.
[64] Lee M.K, Lee J.G, Choi Y.H, Kim D.W, Rhee C.K, Lee Y.B, et al. Interlayer engineering for dissimilar bonding of titanium to stainless steel, Mater Lett. 2010; 64(9): 1105–8.
[65] Lee J.G, Hong S.J, Lee M.K, Rhee C.K, High strength bonding of titanium to stainless steel using an Ag interlayer, J Nucl Mater. 2009; 395: 145–9.
[66] Lee M.K, Park J.J, Lee G.J, Lee J.G, Kim D.W, Lim C.H, et al. Formation of interfacial brittle phases sigma phase and IMC in hybrid titanium-to-stainless steel joint, Trans Nonferrous Met Soc China. 2011; 21(Suppl 1): s7–11.
[67] Lee M.K, Park J.J, Lee G.J, Lee J.G, Kim D.W, Lim C.H, et al. Corrosion of Ti–STS dissimilar joints brazed by a Ag interlayer and Ag–Cu–(Pd) alloy fillers, J Nucl Mater. 2011; 409: 183–7.
[68] Ghosh M, Das S, Banarjee P.S, Chatterjee S, Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple, Mater Sci Eng A. 2005; 390: 217–26.
[69] Ghosh M, Chatterjee S, Diffusion bonded transition joints of titanium to stainless steel with improved properties, Mater Sci Eng A. 2003; 358: 152–8.
[70] Ghosh M, Chatterjee S, Characterization of transition joints of commercially pure titanium to 304 stainless steel, Mater Charact. 2002; 48: 393–9.
[71] Ghosh M, Chatterjee S, Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel, Mater Charact. 2005; 54: 327–37.
[72] Ghosh M, Bhanumurthy K, Kale G.B, Krishnan J, Chatterjee S, Diffusion bonding of titanium to 304 stainless steel, J Nucl Mater. 2003; 322: 235–41.
[73] Ghosh M, Chatterjee S, Mishra B, The effect of intermetallics on the strength properties of diffusion bonds formed between Ti–5.5Al–2.4V and 304 stainless steel, Mater Sci Eng A. 2003; 363: 268–74.
[74] Qin B, Sheng G.M, Huang J.W, Zhou B, Qiu S.Y, Li C, Phase transformation diffusion bonding of titanium alloy with stainless steel, Mater Charact. 2006; 56: 32–8.
[75] Yuan X.J, Sheng G.M, Qin B, Huang W.Z, Zhou B, Impulse pressuring diffusion bonding of titanium alloy to stainless steel, Mater Charact. 2008; 59: 930–6.
[76] Deng Y.Q, Sheng G.M, Huang Z.H, Fan L.Z, Microstructure and mechanical properties of diffusion bonded titanium/304 stainless steel joint with pure Ag interlayer, Sci Technol Weld Join. 2013; 18(2): 143–6.
[77] Shafiei A, Abachi P, Dehghani K, Pourazarang K, On the formation of intermetallics during the furnace brazing of pure titanium to 304 stainless steel using Ag (30–50%)–Cu filler metals, Mater Manuf Process. 2010; 25: 1333–40.
[78] Orhan N, Khan T.I, Eroglu M, Diffusion bonding of microduplex stainless steel to Ti-6Al-4V, Scr Mater. 2001; 45: 441–6.
[79] Kato H, Shibata M, Yoshikawa K, Diffusion welding of Ti/Ti and Ti/stainless steel rods under phase transformation in air, Mater Sci Technol. 1986; 2(4): 405–9.
[80] Li P, Li J, Xiong J, Zhang F, Raza SH. Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer, Mater Charact. 2012; 68: 82–7.
[81] Kale G.B, Patil R.V, Gawade P.S, Interdiffusion studies in titanium–304 stainless steel system, J Nucl Mater. 1998; 257: 44–50.
[82] Liao J, Yamamoto N, Liu H, Nakata K, Microstructure at friction stir lap joint interface of pure titanium and steel, Mater Lett. 2010: 2317–20.
[83] Gao Y, Nakata K, Nagatsuka K, Liu FC, Liao J, Interface microstructural control by probe length adjustment in friction stir welding of titanium and steel lap joint, Mater Des. 2015; 65: 17–23.
[84] Fuji A, North T.H, Ameyama K, Futamata M, Improving tensile strength and bend ductility of titanium/AISI 304L stainless steel friction welds, Mater Sci Technol. 1992; 8(3): 219–35.
[85] Kim Y, Fuji A, North T. Residual stress and plastic strain in AISI 304L stainless steel/titanium friction welds, Mater Sci Technol. 1995; 11(4): 383–8.
[86] Fazel-Najafabadi M, Kashani-Bozorg S.F, Zarei-Hanzaki A, Joining of CP-Ti to 304 stainless steel using friction stir welding technique, Mater Des. 2010: 4800–7.
[87] Fazel-Najafabadi M, Kashani-Bozorg S.F, Zarei-Hanzaki A, Dissimilar lap joining of 304 stainless steel to CP-Ti employing friction stir welding, Mater Des. 2011; 32(4): 1824–32.
[88] Manikandan P, Hokamoto K, Deribas A.A, Raghukandan K, Tomoshige R, Explosive welding of titanium/stainless steel by controlling energetic conditions, Mater Trans. 2006; 47(8): 2049–55.
[89] Manikandan P, Hokamoto K, Fujita M, Raghukandan K, Tomoshige R, Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/304 stainless steel, J Mater Process Technol. 2008: 232–40.
[90] Kahraman N, Gulenc B, Findik F, Joining of titanium/stainless steel by explosive welding and effect on interface, J Mater Process Technol. 2005: 127–33.
[91] Akbari Mousavi S.A.A, Farhadi Sartangi P, Experimental investigation of explosive welding of CP-titanium/AISI 304 stainless steel, Mater Des. 2009: 459–68.
[92] Akbari Mousavi S.A.A, Farhadi Sartangi P, Effect of post-weld heat treatment on the interface microstructure of explosively welded titanium–stainless steel composite, Mater Sci Eng A. 2008: 329–36.
[93] Mudali U.K, Rao B.M.A, Shanmugam K, Natarajan R, Raj B, Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless steel, J Nucl Mater. 2003: 40–8.
[94] Bi Y, Xu Y, Luo Z, Material characterization and mechanical performance of laser diffusion welded joint between titanium alloy and stainless steel, Mater Lett. 2023; 336: 133927.
[95] Zhang Y, Chen Y.K, Zhou J.P, Sun D.Q, Li H.M, Laser welding of TC4 Ti alloy and 304 stainless steel with different joining modes, Int J Metall Met Phys. 2020; 5:1–7.
[96] Li Y.L, Di H.S, Chen L.Q, Wang X.N, Li T.X, Microstructure and mechanical properties of TA2/304 weld seam with Cu transition layer under bias oscillation laser welding process, J Mater Eng Perform. 2023: 1–14.
[97] Zhang Y, Bi Y, Zhou J, Sun D, Li H, Strength improvement and interface characteristic of TC4 Ti alloy and 304 stainless steel joint based on a hybrid connection mechanism, J Mater Res Technol. 2020; 9(2): 1340–3.
[98] Zhang Y, Zhou J, Sun D, Li H, Two pass laser welding of TC4 titanium alloy to 301L stainless steel via pure V interlayer, J Mater Res Technol. 2020; 9(2): 1400–4.
[99] Zhang Y, Chen Y, Zhou J, Sun D, Gu X, Forming mechanism and mechanical property of pulsed laser welded Ti alloy and stainless steel joint using copper as interlayer, J Mater Res Technol. 2020; 9(2): 1425– 33.
[100] Zhang Y, Zhou J, Sun D, Gu X, Nd:YAG laser welding of dissimilar metals of titanium alloy to stainless steel without filler metal based on a hybrid connection mechanism, J Mater Res Technol. 2020; 9(2): 1662–72.
[101] Zhang Y, Sun D.Q, Gu X.Y, Duan Z.Z, Li H.M, Nd: YAG pulsed laser welding of TC4 Ti alloy to 301L stainless steel using Ta/V/Fe composite interlayer, Mater Lett. 2018; 212: 54-7.
[102] Gao Y, Zhou J, Zhang Y, Sun D, Li H, Two pass laser welding of TC4 titanium alloy and 304 stainless steel using TA2/Q235 composite interlayer, Mater Lett. 2019; 255: 126521.
[103] Zhang Y, Bi Y, Zhou J, Sun D, Li H, Microstructure and mechanical property improvement of Ti alloy and stainless steel joint based on a hybrid connection mechanism, Mater Lett. 2020; 274: 128012.
[104] Bi Y, Xu Y, Zhang Y, Xue R, Bao Y, Single-pass laser welding of TC4 Ti alloy to 304 SS with V interlayer and V/Cu bilayer, Mater Lett. 2021; 285: 129072.
[105] Zhang Y, Bi Y, Zhou J, Sun D, Characterization of laser beam offset welding of titanium to steel with 38 Zn-61Cu alloy filler, Opt Laser Technol. 2020; 127: 106195.
[106] Zhang Y, Bi Y, Zhou J, Characterization of laser beam offset welding TiNi alloy and 304 stainless steel with different joining modes, Opt Laser Technol. 2020; 131: 106372.
[107] Zhang Y, Sun D, Gu X, Li H, et al. Microstruc ture and mechanical property improvement of dissimilar metal joints for TC4 Ti alloy to 301L stainless steel, J Mater Sci. 2018; 53: 2942-55.
[108] Zhang Y, Zhou J, Sun D, Li H, Preparation of high-strength TC4/304 dissimilar joint with TA2/304 composite interlayer by a dual-pass laser, Opt Laser Technol. 2022; 154: 108298.
[109] Zhang Y, Sun D, Gu X, Microstructure and mechanical property improvement in laser-welded TC4 titanium alloy and 301L stainless steel joints without filler metal, J Mater Eng Perform. 2019; 28: 140-53.
[110] Bi Y, Xu Y, Zhang Y, Xue R, Two pass laser welding of 304 stainless to TC4 titanium alloy using monel 400/Nb bilayer, J Mater Res Technol. 2020; 9(6): 16522-8.
[111] Zhang Y, Zhou J, Sun D, Li H, Three-pass laser welding of Ti alloy-stainless steel using Nb and Ni interlayers, J Mater Res Technol. 2020; 1780-4.
[112] Zhang Y, Gao Y, Zhou J, Sun D, Li H, Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer, Int J Mater Res. 2021; 112: 422-6.
[113] Adomako N.K, Lewandowski J.J, Arkhurst B.M, Choi H, Chang H.J, Kim J.H, Microstructures and mechanical properties of multi-layered materials composed of Ti-6Al-4V, vanadium, and 17–4PH stainless steel produced by directed energy deposition, Addit Manuf. 2022; 59: 103174.
[114] Lu W, Zhang Y, Guo Z, Liu Y, Yu D, Double-pass laser welding of TC4 alloy and 304 stainless steel, Mater Sci Technol. 2023; 39(9): 1059-67.
[115] Zeng H, Yu D, Zhang Y, Zhou J, Chen Y, Microstructure and mechanical properties of laser indirect brazed titanium/steel composite joint with a CuZn filler metal, Mater Sci Technol. 2022; 38(16): 1403-17.
[116] Raj M, Prasad M, Narasimhan K, Microstructure and mechanical properties of Ti-6Al-4V alloy/interstitial free steel joint diffusion bonded with application of copper and nickel interlayers, Metall Mater Trans A. 2020; 51: 6234-47.
[117] Tian N, Zhang C, Lyu P, Guan J, Peng C, Cai J, et al. Impact of high-current pulsed electron beam modification on element diffusion and performance of Ti6Al4V/AISI 316L stainless steel diffusion bonded joints, Mater Charact. 2023; 204: 113163.
[118] Ren G, Zhang Y, Zhou J, Sun D, Li H, Titanium/ steel composites were prepared by composite interlayer and two pass laser welding, J Mater Res Technol. 2023; 27: 6367-75.
[119] Kundu S, Thirunavukarasu G, Diffusion welding of Ti6Al4V and 17-4 stainless steel using Cu/Ni microlayers, J Mater Eng Perform. 2023; 32: 735-51.
[120] Yu D, Zhang Y, Elmi Hosseini S.R, Zhou J, Sun D, Element diffusion and microstructure evolution at interface of stainless steel/Ti alloy joint by laser welding with AgCuTi filler metal, J Mater Res Technol. 2023; 24: 6463-72.
[121] Elmi Hosseini S.R, Feng K, Nie P, Zhang K, Huang J, Li Z, et al. Interlayer thickening for development of laser-welded Ti-SS joint strength, Opt Laser Technol. 2019; 112: 379–94.
