[1] Puleo R, Latif A, Ingarao G, Di Lorenzo R, Fratini L, Solid bonding criteria design for aluminum chips recycling through Friction Stir Consolidation, J Mater Process Technol. 2023; 319: 118080.
[2] Lionetto F, Balle F, Maffezzoli A, Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites, J Mater Process Technol. 2017; 247: 289–295.
[3] Cheng X, Wang S, Zhang J, Huang W, Cheng Y, Zhang J, Effect of damage on failure mode of multi-bolt composite joints using failure envelope method, Compos Struct. 2017; 160: 8–15.
[4] Choi J.I, Hasheminia S.M, Chun H.J, Park J.C, Chang H.S, Failure load prediction of composite bolted joint with clamping force, Compos Struct. 2018; 189: 247– 255.
[5] Huang Y, Meng X, Xie Y, Wan L, Lv Z, Cao J, et al. Friction stir welding/processing of polymers and polymer matrix composites, Compos Part A Appl Sci Manuf. 2018; 105: 235–257.
[6] Goushegir S, dos Santos J, Amancio Filho S, Friction Spot Joining of aluminum AA2024/carbon fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performance, Mater Des. 2014; 54: 196–206.
[7] Jeevi G, Nayak S.K, Kader M.A, Review on adhesive joints and their application in hybrid composite structures, J Adhes Sci Technol. 2019; 33: 1497–1520.
[8] Maggiore S, Banea M.D, Stagnaro P, Luciano G, A Review of Structural Adhesive Joints in Hybrid Joining Processes, Polymers. 2021; 13: 3961.
[9] Lambiase F, Scipioni S.I, Lee C.J, Ko D.C, Liu F, A State of the Art Review on Advanced Joining Processes for Metal Composite and Metal Polymer Hybrid Structures, Materials. 2021; 14: 1890.
[10] Antelo J, Akhavan Safar A, Carbas R, Marques E, Goyal R, da Silva L, Replacing welding with adhesive bonding: An industrial case study, Int J Adhes Adhes. 2021; 113: 103064.
[11] Offerman B, Abke T, Barker M, Vivek A, Daehn G.S, Mechanical properties of joints in 5052 aluminum made with adhesive bonding and mechanical fasteners, Int J Adhes Adhes. 2018; 83: 96–102.
[12] Braga D.F, Maciel R, Bergmann L, da Silva L.F, Infante V, dos Santos J.F, et al. Fatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al-Mg Cu alloy, Fatigue Fract Eng Mater Struct. 2018; 42: 1262–1270.
[13] Paulraj C, Raj V.J, An intelligent model for defect prediction in spot welding, Turk J Comput Math Educ. 2021; 12: 3991–4002.
[14] Pouranvari M, Marashi S.P.H, Critical review of automotive steel spot welding: Process, structure and properties, Sci Technol Weld Join. 2013; 18: 361–403.
[15] Beck S.C, Williamson C.J, Kinser R.P, Rutherford B.A, Williams M.B, Phillips B.J, et al. Examination of microstructure and mechanical properties of direct additive recycling for Al-Mg-Mn alloy Machine chip waste, Mater Des. 2023; 228: 111733.
[16] Xie Z, Zhang A, Yan W, Zhang Y, Mu T, Yu C, Study on shear performance and calculation method for self-pierce riveted joints in galvanized steel sheet, ThinWalled Struct. 2021; 161: 107490.
[17] Das T, Panda S.K, Arora K.S, Paul J, Investigation of the microstructure and mechanical behavior of resistance spot-welded CR210 steel joints using graphene as an interlayer, Mater Chem Phys. 2023; 302: 127693.
[18] Balandin A.A, Ghosh S, Bao W, Calizo I, Teweldebrhan D, Miao F, et al. Superior thermal conductivity of single-layer graphene, Nano Lett. 2008; 8(3): 902–907.
[19] Novoselov K.S, Geim A.K, Morozov S.V, Jiang D, Zhang Y, Dubonos S.V, et al. Electric field effect in atomically thin carbon films, Science. 2004; 306(5696): 666–669.
[20] Lee C, Wei X, Kysar J.W, Hone J, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science. 2008; 321(5887): 385–388.
[21] Liu L, Zhou M, Jin L, Li L, Mo Y, Su G, et al. Recent advances in friction and lubrication of graphene and other 2D materials: Mechanisms and applications, Adv Colloid Interface Sci. 2019; 7: 199–216.
[22] Manafi D, Akbari D, Optimization of the Spot Weld Locations for Increasing the Joint Strength of the Welded Plates, Amirkabir J Mech Eng. 2019; 51(5): 1097–1105. [23] Vural M, Akkus A, On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic stainless steel sheets, J Mater Process Technol. 2004; 153: 1–6.
[24] Khosravi M, Mansouri M, Gholami A, Yaghoubinezhad Y, Effect of graphene oxide and reduced graphene oxide nanosheets on the microstructure and mechanical properties of mild steel jointing by flux-cored arc welding, Int J Miner Metall Mater. 2020; 27: 505–514.
[25] Wang S, Wei X, Xu J, Hong J, Song X, Yu C, et al. Strengthening and toughening mechanisms in refilled friction stir spot welding of AA2014 aluminum alloy reinforced by graphene nanosheets, Mater Des. 2020; 186: 108212.
[26] Isa M.S.M, Muhamad M.R, Yusof F, Yusoff N, Brytan Z, Suga T, et al. Improved mechanical and electrical properties of copper-aluminum joints with highly aligned graphene reinforcement via friction stir spot welding, J Mater Res Technol. 2023; 24: 9203–9215.
[27] Hummers W.S Jr, Offerman R.E. Preparation of graphitic oxide, J Am Chem Soc. 1958; 80(6): 1339.
[28] Jia H, Xu J, Lu L, Yu Y, Zuo Y, Tian Q, et al. Three-dimensional Au nanoparticles/nano-poly (3,4-ethylene dioxythiophene)-graphene aerogel nanocomposite: A high-performance electrochemical immunosensing platform for prostate-specific antigen detection, Sens Actuator B Chem. 2018; 260: 990–997.
[29] Taheridoustabad I, Khosravi M, Yaghoubinezhad Y. Fabrication of GO/RGO/TiC/TiB2 nanocomposite coating on Ti–6Al–4V alloy using electrical discharge coating and exploring its tribological properties, Tribol Int. 2021; 156: 106860.
[30] Cheng L, Liu C, Han D, Ma S, Guo W, Cai H, et al. Effect of graphene on corrosion resistance of waterborne inorganic zinc-rich coatings, J Alloys Compd. 2019; 774: 255–264.
[31] Zhang Y, Chen F, Zhang Y, Du C. Influence of graphene oxide additive on the tribological and electrochemical corrosion properties of a PEO coating prepared on AZ31 magnesium alloy, Tribol Int. 2020; 146: 106135.
