[1] Cavaliere P, Silvello A, Ironmaking and steelmaking processes. Springerverlag, Germany. 2016.
[2] Dutta S.K, Chokshi Y.B, Basic concepts of iron and steel making: Springer Nature. 2020.
[3] Chatterjee A, Sponge iron production by direct reduction of iron oxide: PHI Learning Pvt. Ltd. 2010.
[4] Dutta S.K, Sah R, Direct reduced iron: Production, Encyclopedia of Iron, Steel, and Their Alloys. 2016:1082-108.
[5] Atsushi M, Uemura H, Sakaguchi T, MIDREX processes. Kobelco Technol Rev. 2010; 29(8).
[6] Jiang X, Wang L, Shen F.M, Shaft furnace direct reduction technology-Midrex and Energiron, Advanced materials research. 2013; 805: 654-9.
[7] Sun G, Li B, Guo H, Yang W, Li S, Guo J, Thermodynamic study on reduction of iron oxides by H2+ CO+ CH 4+ N2 mixture at 900° C, Energies. 2020; 13(19): 5053.
[8] Yun Y.M, Chu Y.S, Seo S.K, Jeong J.H, Yun Y.M, Chu Y.S, et al. Analysis of reducing characteristics of direct reduced iron using blast furnace dust. Journal of the Korean Ceramic Society. 2016; 53(4): 444-9.
[9] Midrex Training Manual, Midrex corporation. 1990.
[10] Superdata Manual, Midrex corporation 1990.
[11] Montgomery D.C, Design and analysis of experiments: John wiley & sons. 2017.
[12] Mustafa M.N, Shafie S, Wahid M.H, Sulaiman Y, Optimization of power conversion efficiency of polyvinyl-alcohol/titanium dioxide compact layer using response surface methodology/central composite design, Solar Energy. 2019; 183: 689-96.
[13] Ghadi A.Z, Valipour M.S, Biglari M, CFD simulation of two-phase gas-particle flow in the Midrex shaft furnace: The effect of twin gas injection system on the performance of the reactor, International Journal of Hydrogen Energy. 2017; 42(1): 103-18.
[14] Yadav S, Srishilan C, Shukla A.K, Thermodynamic Model of MIDREX Ironmaking Process Using FactSageTM and Macro Facility, Metallurgical and Materials Transactions B. 2023; 54(6): 3508-25.
[15] Shams A, Moazeni F, Modeling and simulation of the MIDREX shaft furnace: reduction, transition and cooling zones, Jom. 2015; 67: 2681-9.
[16] Salemi S, Torabi M, Haghparast A.K, Technoeconomical investigation of energy harvesting from MIDREX® process waste heat using Kalina cycle in direct reduction iron process, Energy. 2022; 239: 122322.
[17] Parisi D.R, Laborde M.A, Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore, Chemical Engineering Journal. 2004; 104(1-3): 35-43.
[18] Huitu K, Helle M, Helle H, Kekkonen M, Saxén H. Optimization of Midrex Direct Reduced Iron Use in Ore‐ Based Steelmaking. steel research international. 2015; 86(5): 456-65.
[19] Ajbar A, Alhumaizi K, Soliman M.A, Ali E, Model-based energy analysis of an integrated midrex-based iron/steel plant. Chemical Engineering Communications. 2014; 201(12): 1686-704.
[20] Alhumaizi K, Ajbar A, Soliman M, Modelling the complex interactions between reformer and reduction furnace in a midrex‐based iron plant, The Canadian Journal of Chemical Engineering. 2012; 90(5): 1120-41.
[21] Béchara R, Hamadeh H, Mirgaux O, Patisson F, Optimization of the iron ore direct reduction process through multiscale process modeling, Materials. 2018; 11(7): 1094.
[22] Sarkar S, Bhattacharya R, Roy G.G, Sen P.K, Modeling MIDREX based process configurations for energy and emission analysis, steel research international. 2018; 89(2): 1700248.
[23] Bhattacharya S. Central composite design for response surface methodology and its application in pharmacy, Response surface methodology in engineering science: IntechOpen; 2021.
[24] García-Gómez C, Drogui P, Zaviska F, Seyhi B, Gortáres-Moroyoqui P, Buelna G, et al. Experimental design methodology applied to electrochemical oxidation of carbamazepine using Ti/PbO2 and Ti/BDD electrodes. Journal of Electroanalytical Chemistry. 2014; 732: 1-10.
[25] Mustafa M.N, Sulaiman Y, Optimization of titanium dioxide decorated by graphene quantum dot as a light scatterer for enhanced dye-sensitized solar cell performance, Journal of Electroanalytical Chemistry. 2020; 876: 114516.
[26] Sadhukhan B, Mondal N.K, Chattoraj S, Optimisation using central composite design (CCD) and the desirability function for sorption of methylene blue from aqueous solution onto Lemna major, Karbala International Journal of Modern Science. 2016; 2(3): 145-55.
[27] Safari G.H, Nasseri S, Mahvi A.H, Yaghmaeian K, Nabizadeh R, Alimohammadi M, Optimization of sonochemical degradation of tetracycline in aqueous solution using sono-activated persulfate process, Journal of Environmental Health Science and Engineering. 2015; 13: 1-15.
[28] Alencar J.P.S.G.d, Pereira B.A, Castro J.A.d, Resende V.G.d, Vasconcelos W.L, Evaluation of the impact of cluster formation in a direct reduction shaft furnace through numerical simulation, REM-International Engineering Journal. 2021; 74: 451-61.
[29] Baolin H, Zhang H, Hongzhong L, Qingshan Z, Study on kinetics of iron oxide reduction by hydrogen, Chinese journal of chemical engineering. 2012; 20(1): 10-7
