Evaluation of Heat Treatments and Their Effects on the Corrosion Behavior of TiAlON Coatings Prepared by Cathodic Arc Evaporation on D3 Tool Steel
[1] W. J. Chou, G.P. Yu and J. H. Huang: Corros.
Sci., 43(2001), 2023.
[2] S. PalDey and SC. Deevi: Mater. Sci. Eng.,
342(2003), 58.
[3] J. Musil and H. Hruby, Thin Solid Films.,
365(2000), 104.
[4] A. Kimura, H. Hasegawa, K. Yamada and TJ.
Suzuki: Sci. Lett., 19(2000), 601.
[5] J. Vetter, HJ. Scholl and O. Knotek: Surf. Coat.
Technol. 74-75 (1995), 286.
[6] I. Grimberg, VM. Zhitomirsky, RL. Boxman, S.
Goldsmith and BZ. Weiss: Surf. Coat. Technol., 108-
109(1998), 154.
[7] L. Yan, Y. Dong, W. Zhao and G. Li: Int. J. Refract.
Met. Hard. Mater., 25 (2007), 271.
[8] J. Sjölén, L. Karlsson, S. Braun, R. Murdey,
A. Hörling and L. Hultman: Surf. Coat. Technol.
201(2007), 6392.
[9] K. Tonshoff, B. Karpuschewski, A. Mohlfeld, T.
Leyendecker, G. Erkens, H.G. Fub and R. Wenke:
Surf. Coat. Technol., 108–109(1998), 535.
[10] S.B. Sant and K.S. Gill: Surf. Coat. Technol.,
68(1994), 152.
[11] C. H. Hsu, M. L. Chen and K.L. Lai: Mater. Sci.
Eng. A., 421(2006), 182.
[12] X.Z. Ding, X.T. Zeng, Y.C. Liu, L.R. Zhao and J.
Vac: J. Vac. Sci. Technol. A., 24(2006), 974.
[13] B.F. Chen, W.L. Pan b, G.P. Yu, J. Hwang and
J.H. Huang: Surf. Coat. Technol., 111(1999), 16.
[14] L. Fu-Hsing, F. Shiaw-Pyng, C. Hong-Ying and
L. Ji-Kwei: Thin Solid Films.,375 (2000), 123.
[15] S. Niyomsoan, W. Grant, D.L. Olson and B.
Mishra: Thin Solid Films., 415 (2002), 187.
[16] A. Mubarak, E. Hamzahand and M. R. M. Toff:
Jurnal Mekanikal, 20(2005), 42.
[17] C. Harish Barshilia, M. Surya Prakash, Anjana
Jain and K.S. Rajam: Vacuum 77(2005), 169.
[18] J.L. Huang and B.Y. Shew: J. Am. Ceram. Soc.,
82(1999), 696.
[19] V.K. William Grips, H. C. Barshilia, V. EzhilSelvi,
Kalavati and K.S. Rajam: Thin Solid Films 514(2006),
204.
Sci., 43(2001), 2023.
[2] S. PalDey and SC. Deevi: Mater. Sci. Eng.,
342(2003), 58.
[3] J. Musil and H. Hruby, Thin Solid Films.,
365(2000), 104.
[4] A. Kimura, H. Hasegawa, K. Yamada and TJ.
Suzuki: Sci. Lett., 19(2000), 601.
[5] J. Vetter, HJ. Scholl and O. Knotek: Surf. Coat.
Technol. 74-75 (1995), 286.
[6] I. Grimberg, VM. Zhitomirsky, RL. Boxman, S.
Goldsmith and BZ. Weiss: Surf. Coat. Technol., 108-
109(1998), 154.
[7] L. Yan, Y. Dong, W. Zhao and G. Li: Int. J. Refract.
Met. Hard. Mater., 25 (2007), 271.
[8] J. Sjölén, L. Karlsson, S. Braun, R. Murdey,
A. Hörling and L. Hultman: Surf. Coat. Technol.
201(2007), 6392.
[9] K. Tonshoff, B. Karpuschewski, A. Mohlfeld, T.
Leyendecker, G. Erkens, H.G. Fub and R. Wenke:
Surf. Coat. Technol., 108–109(1998), 535.
[10] S.B. Sant and K.S. Gill: Surf. Coat. Technol.,
68(1994), 152.
[11] C. H. Hsu, M. L. Chen and K.L. Lai: Mater. Sci.
Eng. A., 421(2006), 182.
[12] X.Z. Ding, X.T. Zeng, Y.C. Liu, L.R. Zhao and J.
Vac: J. Vac. Sci. Technol. A., 24(2006), 974.
[13] B.F. Chen, W.L. Pan b, G.P. Yu, J. Hwang and
J.H. Huang: Surf. Coat. Technol., 111(1999), 16.
[14] L. Fu-Hsing, F. Shiaw-Pyng, C. Hong-Ying and
L. Ji-Kwei: Thin Solid Films.,375 (2000), 123.
[15] S. Niyomsoan, W. Grant, D.L. Olson and B.
Mishra: Thin Solid Films., 415 (2002), 187.
[16] A. Mubarak, E. Hamzahand and M. R. M. Toff:
Jurnal Mekanikal, 20(2005), 42.
[17] C. Harish Barshilia, M. Surya Prakash, Anjana
Jain and K.S. Rajam: Vacuum 77(2005), 169.
[18] J.L. Huang and B.Y. Shew: J. Am. Ceram. Soc.,
82(1999), 696.
[19] V.K. William Grips, H. C. Barshilia, V. EzhilSelvi,
Kalavati and K.S. Rajam: Thin Solid Films 514(2006),
204.
)