Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
[1] E.E. Vera, M. Vite, R. Lewis, E.A. Gallardo and
J.R. Laguna-Camacho: Wear, 271(2011), 2116.
[2] P.H. Mayrhofer, C. Mitterer, L. Hultman and H.
Clemens: Prog. Mater. Sci., 51(2006), 1032.
[3] Y.C. Chim, X.Z. Ding, X.T. Zeng and S. Zhang:
Thin Solid Films, 517(2009), 4845.
[4] M.D. Drory and R.D. Evans: Surf. Coat.
Technol., 206(2011), 1983.
[5] J.L. Mo and M.H. Zhu: Appl. Surf. Sci.,
255(2009), 7627.
[6] S. Tan, X. Zhang, X. Wu, F. Fang and J. Jiang:
Thin Solid Films, 519(2011), 2116.
[7] A. Oztürk, K.V. Ezirmik, K. Kazmanlı, M.
Ürgen, O.L. Eryılmaz and A. Erdemir: Tribol. Int.,
41(2008), 49.
[8] S.M. Aouadi, K.C. Wong, K.A.R. Mitchell, F.
Namavar, E. Tobin, D.M. Mihut and S.L. Rohde:
Appl. Surf. Sci., 229(2004), 387.
[9] L. Chen, S.Q. Wang, S.Z. Zhou, J. Li and Y.Z.
Zhang: Int. J. Refract. Met. Hard. Mater., 26(2008),
456.
[10] M. Tamura and T. Tokunaga: Surf. Coat.
Technol., 108–109(1998), 551.
[11] S.Q. Wang, L. Chen, B. Yang, K.K. Chang, Y.
Du, J. Li and T. Gang: Int. J. Refract. Met. Hard.
Mater., 28(2010), 593.
[12] L. Chen, Y. Du, S.Q. Wang and J. Li: Int. J.
Refract. Met. Hard. Mater., 25(2007), 400.
[13] K. Singh, P.K. Limaye, N.L. Soni, A.K. Grover,
R.G. Agrawal and A.K. Suri: Wear, 258(2005),
1813.
[14] Y. Jin, Y. Liu, J. Ye and B. Li: Int. J. Refract.
Met. Hard. Mater., 29(2011), 268.
[15] P. Wally, P. Ettmayer and W. Lengauer: J. Alloy
Compd., 228(1995), 96.
[16] J.G. Han, H.S. Myung, H.M: Lee and L.R.
Shaginyan, Surf. Coat. Technol., 174–175(2003),
738.
[17] P. Budzynski, J. Sielanko, Z. Surowiec and P.
Tarkowski, Vacuum, 83(2009), 186.
[18] G. Ebersbach, D. Fabian, W. Wuttke and H.A.
Jehn: Surf. Coat. Technol., 59(1993), 160.
[19] R. Rother and H.A. Jehn: Surf. Coat. Technol.,
62(1993), 635.
[20] C.W. Teplin, M.F.A.M. van Hest, M. Dabney,
C.L. Perkins, L.M. Gedvillas, B. To, P.A. Parilla,
B.M. Keyes, J.D. Perkins, D.S. Ginley, Y. Lin and
Y. Lu: Appl. Surf. Sci., 223(2004), 253.
[21] D.E. Wolfe, B.M. Gabriel and M.W. Reedy:
Surf. Coat. Technol., 205(2011), 4569.
[22] X. Zeng, S. Zhang and J. Hsieh: Surf. Coat.
Technol., 102(1998), 108.
[23] G.A. Zhang, P.X. Yan, P. Wang, Y.M. Chen and
J.Y. Zhang: Appl. Surf. Sci., 253(2007), 7353.
[24] B.D. Cullity and S.R. Stock: Elements of X-Ray
Diffraction, Prentice Hall, New Jersey, (2001).
[25] W.C. Oliver and G.M: Pharr: Mater. Res.,
7(1992), 1564.
[26] B. Warcholinski, A. Gilewicz, J. Ratajski, Z.
Kuklinski and J. Rochowicz, Vacuum, 23(2011),
101.
[27] M. Ali, E. Hamzah, I.A. Qazi and M.R.M. Toff:
Curr. Appl. Phys., 10(2010), 471.
[28] K.H. Lee, C.H. Park, Y.S. Yoon and J.J. Lee:
Thin Solid Films, 385(2001), 167.
[29] V.M. Vishnyakov, V.I. Bachurin, K.F.
Minnebaev, R. Valizadeh and D.G. Teer: Thin Solid
Films, 497 (2006) 189.
[30] J. Vetter, H.J. Scholl and O. Knotek: Surf.
Coat. Technol., 74-75(1995), 286.
[31] J.J. Nainaparampil, J.S. Zabinski and A.
Korenyi-Both: Thin Solid Films, 333(1998), 88.
[32] S.Y. Lee, G.S. Kim and J.H. Hahn: Surf. Coat.
Technol., 177–178(2004), 426.
Solid Films, 332 (1998) 240.
[33] H. Hasegawa, A. Kimura and T. Suzuki: J. Vac.
Sci. Technol. A, 18(2000), 1038.
[34] M. Ahlgren and H. Blomqvist: Surf. Coat.
Technol., 200(2005), 157.
[35] P.H. Mayrhofer, G. Tischler and C. Mitterer:
Surf. Coat. Technol., 142–144(2001), 78.
J.R. Laguna-Camacho: Wear, 271(2011), 2116.
[2] P.H. Mayrhofer, C. Mitterer, L. Hultman and H.
Clemens: Prog. Mater. Sci., 51(2006), 1032.
[3] Y.C. Chim, X.Z. Ding, X.T. Zeng and S. Zhang:
Thin Solid Films, 517(2009), 4845.
[4] M.D. Drory and R.D. Evans: Surf. Coat.
Technol., 206(2011), 1983.
[5] J.L. Mo and M.H. Zhu: Appl. Surf. Sci.,
255(2009), 7627.
[6] S. Tan, X. Zhang, X. Wu, F. Fang and J. Jiang:
Thin Solid Films, 519(2011), 2116.
[7] A. Oztürk, K.V. Ezirmik, K. Kazmanlı, M.
Ürgen, O.L. Eryılmaz and A. Erdemir: Tribol. Int.,
41(2008), 49.
[8] S.M. Aouadi, K.C. Wong, K.A.R. Mitchell, F.
Namavar, E. Tobin, D.M. Mihut and S.L. Rohde:
Appl. Surf. Sci., 229(2004), 387.
[9] L. Chen, S.Q. Wang, S.Z. Zhou, J. Li and Y.Z.
Zhang: Int. J. Refract. Met. Hard. Mater., 26(2008),
456.
[10] M. Tamura and T. Tokunaga: Surf. Coat.
Technol., 108–109(1998), 551.
[11] S.Q. Wang, L. Chen, B. Yang, K.K. Chang, Y.
Du, J. Li and T. Gang: Int. J. Refract. Met. Hard.
Mater., 28(2010), 593.
[12] L. Chen, Y. Du, S.Q. Wang and J. Li: Int. J.
Refract. Met. Hard. Mater., 25(2007), 400.
[13] K. Singh, P.K. Limaye, N.L. Soni, A.K. Grover,
R.G. Agrawal and A.K. Suri: Wear, 258(2005),
1813.
[14] Y. Jin, Y. Liu, J. Ye and B. Li: Int. J. Refract.
Met. Hard. Mater., 29(2011), 268.
[15] P. Wally, P. Ettmayer and W. Lengauer: J. Alloy
Compd., 228(1995), 96.
[16] J.G. Han, H.S. Myung, H.M: Lee and L.R.
Shaginyan, Surf. Coat. Technol., 174–175(2003),
738.
[17] P. Budzynski, J. Sielanko, Z. Surowiec and P.
Tarkowski, Vacuum, 83(2009), 186.
[18] G. Ebersbach, D. Fabian, W. Wuttke and H.A.
Jehn: Surf. Coat. Technol., 59(1993), 160.
[19] R. Rother and H.A. Jehn: Surf. Coat. Technol.,
62(1993), 635.
[20] C.W. Teplin, M.F.A.M. van Hest, M. Dabney,
C.L. Perkins, L.M. Gedvillas, B. To, P.A. Parilla,
B.M. Keyes, J.D. Perkins, D.S. Ginley, Y. Lin and
Y. Lu: Appl. Surf. Sci., 223(2004), 253.
[21] D.E. Wolfe, B.M. Gabriel and M.W. Reedy:
Surf. Coat. Technol., 205(2011), 4569.
[22] X. Zeng, S. Zhang and J. Hsieh: Surf. Coat.
Technol., 102(1998), 108.
[23] G.A. Zhang, P.X. Yan, P. Wang, Y.M. Chen and
J.Y. Zhang: Appl. Surf. Sci., 253(2007), 7353.
[24] B.D. Cullity and S.R. Stock: Elements of X-Ray
Diffraction, Prentice Hall, New Jersey, (2001).
[25] W.C. Oliver and G.M: Pharr: Mater. Res.,
7(1992), 1564.
[26] B. Warcholinski, A. Gilewicz, J. Ratajski, Z.
Kuklinski and J. Rochowicz, Vacuum, 23(2011),
101.
[27] M. Ali, E. Hamzah, I.A. Qazi and M.R.M. Toff:
Curr. Appl. Phys., 10(2010), 471.
[28] K.H. Lee, C.H. Park, Y.S. Yoon and J.J. Lee:
Thin Solid Films, 385(2001), 167.
[29] V.M. Vishnyakov, V.I. Bachurin, K.F.
Minnebaev, R. Valizadeh and D.G. Teer: Thin Solid
Films, 497 (2006) 189.
[30] J. Vetter, H.J. Scholl and O. Knotek: Surf.
Coat. Technol., 74-75(1995), 286.
[31] J.J. Nainaparampil, J.S. Zabinski and A.
Korenyi-Both: Thin Solid Films, 333(1998), 88.
[32] S.Y. Lee, G.S. Kim and J.H. Hahn: Surf. Coat.
Technol., 177–178(2004), 426.
Solid Films, 332 (1998) 240.
[33] H. Hasegawa, A. Kimura and T. Suzuki: J. Vac.
Sci. Technol. A, 18(2000), 1038.
[34] M. Ahlgren and H. Blomqvist: Surf. Coat.
Technol., 200(2005), 157.
[35] P.H. Mayrhofer, G. Tischler and C. Mitterer:
Surf. Coat. Technol., 142–144(2001), 78.
)