The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process
نوع مقاله : مقاله پژوهشی
نویسندگان
[1] H. K. D. H. Bhadeshia and R. Honeycombe:
Steels Microstructure and Properties, Third edition,
Butterworth Heinemann, Oxford, (2006).
[2] N. Nakada, N. Hirakawa and T. Tsuchiyama:
Scripta Mater., 57(2007) 153-156.
[3] M. Karimi, A. Najafizadeh, A. Kermanpur and M.
Eskandari: Mater. Charac., 60(2009) 1220 –1223.
[4] R. Song, D. Ponge, D. Raabe, J.G. Speer and D.K
Matlock: Mater. Sci. Eng., A 441(2006) 1-17.
[5] D.C. Cook: Metall. Trans., 18A (1987) 201-210.
[6] T. Angel: Journal of the Iron and Steel Institute,
177(1954) 165-174.
[7] A. Das, S. Sivaprasad, M. Ghosh, P.C. Chakraborti
and S. Tarafder: Mater. Sci. Eng., A 486(2008) 283–
286.
[8] R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya,
M.C. Somani and L.P. Karjalainen: Mater. Sci. Eng.,
A 528(2011), 1889–1896.
[9] R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya,
M.C. Somani and L.P. Karjalainen: Mater. Sci. Eng.,
A 527(2010) 7779–7792.
[10] J. Yong Choi, J. Hoon Ji, S. Hwang and K.T.
Park: Mater. Sci. Eng., A 522(2011) 582–586.
[11] Y.K. Lee: Mater. Lett, 21(2002) 1149-1151.
[12] T.H. Lee, Ch. Seok Oh and S.J. Kim: Scripta
Mater., 58(2008) 110-113.
[13] J. Talonen and H. Hänninen: Acta Mater, 55(2007)
6108–6118.
[14] S. Frechard, A. Redjiımia, E. Lach and A.
Lichtenberger: Mater. Sci. Eng., A 415(2006) 219–
224.
[15] S. Saeedipour, A. Najafizadeh and A. Kermanpour:
6th Joint Conf. of IMES, Tehran University, (2012).
[16] G. H. Eichelman and F. C. Hull: Trans. Am. Soc.
Met., 45(1953) 77-95.
Steels Microstructure and Properties, Third edition,
Butterworth Heinemann, Oxford, (2006).
[2] N. Nakada, N. Hirakawa and T. Tsuchiyama:
Scripta Mater., 57(2007) 153-156.
[3] M. Karimi, A. Najafizadeh, A. Kermanpur and M.
Eskandari: Mater. Charac., 60(2009) 1220 –1223.
[4] R. Song, D. Ponge, D. Raabe, J.G. Speer and D.K
Matlock: Mater. Sci. Eng., A 441(2006) 1-17.
[5] D.C. Cook: Metall. Trans., 18A (1987) 201-210.
[6] T. Angel: Journal of the Iron and Steel Institute,
177(1954) 165-174.
[7] A. Das, S. Sivaprasad, M. Ghosh, P.C. Chakraborti
and S. Tarafder: Mater. Sci. Eng., A 486(2008) 283–
286.
[8] R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya,
M.C. Somani and L.P. Karjalainen: Mater. Sci. Eng.,
A 528(2011), 1889–1896.
[9] R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya,
M.C. Somani and L.P. Karjalainen: Mater. Sci. Eng.,
A 527(2010) 7779–7792.
[10] J. Yong Choi, J. Hoon Ji, S. Hwang and K.T.
Park: Mater. Sci. Eng., A 522(2011) 582–586.
[11] Y.K. Lee: Mater. Lett, 21(2002) 1149-1151.
[12] T.H. Lee, Ch. Seok Oh and S.J. Kim: Scripta
Mater., 58(2008) 110-113.
[13] J. Talonen and H. Hänninen: Acta Mater, 55(2007)
6108–6118.
[14] S. Frechard, A. Redjiımia, E. Lach and A.
Lichtenberger: Mater. Sci. Eng., A 415(2006) 219–
224.
[15] S. Saeedipour, A. Najafizadeh and A. Kermanpour:
6th Joint Conf. of IMES, Tehran University, (2012).
[16] G. H. Eichelman and F. C. Hull: Trans. Am. Soc.
Met., 45(1953) 77-95.
)