Developing Very Fine Nanopearlitic Structure in a High Carbon Steel Wire before Drawing
نوع مقاله : مقاله پژوهشی
نویسنده
کلیدواژهها
[1] J. Horsfall: Manufacture of Wire Rope, B. Patent,
(1856).
[2] V. M. Schastlivtsev, D. A. Mirzaev and I. L.
Yakovleva: Pearlite in Carbon Steels, Ural. Otd. Ross.
Akad. Nauk, Ekaterinburg, (2006), [In Russian].
[3] J. D. Embury and R. M. Fisher: Acta Metall.,
14(1966), 147.
[4] M. Dollar, I. M. Bernstein and A. W. Thompson:
Acta Metall., 36(1988), 311.
[5] M. Zelin: Acta Mater., 50(2002), 4431.
[6] A. M. Elwazri, P. Wanjara and S. Yue: Mater. Sci.
Eng. A, 404(2005), 91.
[7] W. J. Nam, C. M. Bae and C. S Lee: J. Mater. Sci.,
37(2002), 2243.
[8] Y. S. Yang, J. G. Bae and C. G. Park: Mater. Sci.
Eng. A, 508(2009), 148.
[9] B. Pourladian: Fracture Toughness Evaluation
of High Strength Cold Drawn Eutectoid Steel Wires
Used In Wire Ropes, Ph.D. Thesis, University of
Kansas, (1999).
[10] R. F. Mehl, C. S. Barrett and D. W. Smith: Trans.
AIME, 105(1933), 215.
[11] C. Zener: Trans. AIME, 167(1946), 550.
[12] V. T. L. Buono, B.M. Gonzalez, T. M. Lima and
M. S. Andrade: J. Mater. Sci. 32(1997), 1005.
[13] R. O. Olivares, C. I. Garcia, A. Deardo, S. Kalay
and F. C. Robles Hernandez: Wear, 271(2011), 364.
[14] F. G. Caballero, C. Garcia de Andres and C.
Capdevila: Mater. Charact., 45(2000), 111.
[15] F. G. Caballero, C. Capdevila and C. Garcia de
Andres: Scripta Mater., 42(2000), 537.
[16] R. W. K. Honeycombe and H. K. D. H. Bhadeshia:
Steels Microstructure and Properties, Edward Arnold,
(1995).
[17] V. I. Izotov, M. E. Getmanova, A. A. Burzhanov,
E. Y. Kireeva and G. A. Filippov: Phys. Met. Metallogr.
108(2009), 606.
[18] O. P. Modi, N. Deshmukh, D. P. Mondal, A. K.
Jha, A. H. Yegneswaran and H. K. Khaira: Mater.
Charact., 46(2001), 347.
[19] O. Bouaziz and C. Le Core: Mater. Sci. Forum,
1399(2003), 426.
[20] X. D. Zhang, A. Godfrey, X. Huang, N. Hansen
and Q. Liu: Acta Mater., 59(2011), 3422.
(1856).
[2] V. M. Schastlivtsev, D. A. Mirzaev and I. L.
Yakovleva: Pearlite in Carbon Steels, Ural. Otd. Ross.
Akad. Nauk, Ekaterinburg, (2006), [In Russian].
[3] J. D. Embury and R. M. Fisher: Acta Metall.,
14(1966), 147.
[4] M. Dollar, I. M. Bernstein and A. W. Thompson:
Acta Metall., 36(1988), 311.
[5] M. Zelin: Acta Mater., 50(2002), 4431.
[6] A. M. Elwazri, P. Wanjara and S. Yue: Mater. Sci.
Eng. A, 404(2005), 91.
[7] W. J. Nam, C. M. Bae and C. S Lee: J. Mater. Sci.,
37(2002), 2243.
[8] Y. S. Yang, J. G. Bae and C. G. Park: Mater. Sci.
Eng. A, 508(2009), 148.
[9] B. Pourladian: Fracture Toughness Evaluation
of High Strength Cold Drawn Eutectoid Steel Wires
Used In Wire Ropes, Ph.D. Thesis, University of
Kansas, (1999).
[10] R. F. Mehl, C. S. Barrett and D. W. Smith: Trans.
AIME, 105(1933), 215.
[11] C. Zener: Trans. AIME, 167(1946), 550.
[12] V. T. L. Buono, B.M. Gonzalez, T. M. Lima and
M. S. Andrade: J. Mater. Sci. 32(1997), 1005.
[13] R. O. Olivares, C. I. Garcia, A. Deardo, S. Kalay
and F. C. Robles Hernandez: Wear, 271(2011), 364.
[14] F. G. Caballero, C. Garcia de Andres and C.
Capdevila: Mater. Charact., 45(2000), 111.
[15] F. G. Caballero, C. Capdevila and C. Garcia de
Andres: Scripta Mater., 42(2000), 537.
[16] R. W. K. Honeycombe and H. K. D. H. Bhadeshia:
Steels Microstructure and Properties, Edward Arnold,
(1995).
[17] V. I. Izotov, M. E. Getmanova, A. A. Burzhanov,
E. Y. Kireeva and G. A. Filippov: Phys. Met. Metallogr.
108(2009), 606.
[18] O. P. Modi, N. Deshmukh, D. P. Mondal, A. K.
Jha, A. H. Yegneswaran and H. K. Khaira: Mater.
Charact., 46(2001), 347.
[19] O. Bouaziz and C. Le Core: Mater. Sci. Forum,
1399(2003), 426.
[20] X. D. Zhang, A. Godfrey, X. Huang, N. Hansen
and Q. Liu: Acta Mater., 59(2011), 3422.
)