Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
[1] G.E. Dieter, H.A. Kuhn and S.L. Semiatin:
Handbook of workability and process design, ASM
International, USA, OH, (2003).
[2] W.F. Hosford and R.M. Caddel: Metal formingmechanics
and metallurgy, Prentice-Hall International,
London, (1983),
[3] S.M. Fatemi-Varzaneh, A. Zarei-Hanzaki, M.
Naderi and Ali A. Roostaei: J. Alloys and compod.
507 (2010), 207.
[4] F.K. Chen and C.J. Chen: J. Eng. Mater. Technol.
(Trans. ASME), 122 (2000), 192.
[5] J.A. Schey: Tribology in Metalworking: Friction,
Lubrication and Wear, ASM Int., Metals Park, OH,
(1983),
[6] A.T. Male and V. Depierre: J. Lubr. Technol., 92
(1970), 389.
[7] F.P. Bowden and D. Rabor: The Friction
Lubrication of Solid, First ed., Oxford University
Press, London, (1950),
[8] H. Monajati, M. Jahazi, S. Yue and A.K. Taheri:
Metall. Mater. Trans. A, 36 (2005), 895.
[9] R. Ebrahimi, A. Najafizadeh and R. Shateri:
Proc. of Steel Symp. 81, Iranian Institute for Iron and
Steel, Isfahan, Iran, (2003), 230.
[10] R. Ebrahimi and A. Najafizadeh: J. Mater.
Process. Tech., 152 (2004), 136.
[11] Y.P. Li, E. Onodera, H. Matsumoto and A. Chiba:
Metall. Mater. Trans., 40 (2009), 982.
[12] N. Kim and H. Cho: J. Mater. Process. Tech.,
208 ( 2008 ), 211.
[13] H. Cho and T. Altan: J. Mater. Process. Tech.,
170 (2005), 64.
[14] D. Szeliga, J. Gawad and M. Pietrzy: Comput.
Methods Appl. Mech. Eng., 195 (2006), 6778.
[15] R.K. Roy: Design of experiments using the
Taguchi approach-16 Step to product and process
International Journal of ISSI, Vol.8 (2011), No.1
33
improvement, Second ed., Wiley Interscience, New
York, (2001),
[16] G.P. Syrcos: J. Mat. Process. Tech., 135 (2003), 68.
[17] E. El-Danaf, S.R. Kalidindi and R.D. Doherty:
Metall. Mater. Trans. A, 30 (1999), 1223.
[18] A. Galiyev, R. Kaibyshev and G. Gottstein: Acta
Mater., 49 (2001), 1199.
[19] H.J. McQueen and C.A.C. Imbert: J. Alloy.
Compd. 378 (2004), 35.
[20] P. Dadras: J. Eng. Mater. Technol., 107 (1985), 97.
[21] C. Huang, E.B. Hawbolt, X. Chen, T.R.
Meadowcroft and D.K. Matlock: Acta Mater., 49
(2001), 1445.
[22] Y. Lee, B.M. Kim, K.J. Park, S.W. Seo and O.
Min: J. Mater. Process. Tech., 131 (2002), 181.
[23] A. Cingara and H.J. McQueen: J. Mater. Process.
Tech., 36 (1992), 31.
[24] R. Ebrahimi, S.H. Zahiri and A. Najafizadeh: J.
Mater. Process. Tech., 171 (2006), 301.
[25] E. Evangelista, M. Masini, M. El Mehtedi and S.
Spigarelli: J. Alloy. Compd., 378 (2004), 151.
[26] R. Ebrahimi and S. Solhjoo: Int. J. of ISSI, 4
(2007), 24.
Handbook of workability and process design, ASM
International, USA, OH, (2003).
[2] W.F. Hosford and R.M. Caddel: Metal formingmechanics
and metallurgy, Prentice-Hall International,
London, (1983),
[3] S.M. Fatemi-Varzaneh, A. Zarei-Hanzaki, M.
Naderi and Ali A. Roostaei: J. Alloys and compod.
507 (2010), 207.
[4] F.K. Chen and C.J. Chen: J. Eng. Mater. Technol.
(Trans. ASME), 122 (2000), 192.
[5] J.A. Schey: Tribology in Metalworking: Friction,
Lubrication and Wear, ASM Int., Metals Park, OH,
(1983),
[6] A.T. Male and V. Depierre: J. Lubr. Technol., 92
(1970), 389.
[7] F.P. Bowden and D. Rabor: The Friction
Lubrication of Solid, First ed., Oxford University
Press, London, (1950),
[8] H. Monajati, M. Jahazi, S. Yue and A.K. Taheri:
Metall. Mater. Trans. A, 36 (2005), 895.
[9] R. Ebrahimi, A. Najafizadeh and R. Shateri:
Proc. of Steel Symp. 81, Iranian Institute for Iron and
Steel, Isfahan, Iran, (2003), 230.
[10] R. Ebrahimi and A. Najafizadeh: J. Mater.
Process. Tech., 152 (2004), 136.
[11] Y.P. Li, E. Onodera, H. Matsumoto and A. Chiba:
Metall. Mater. Trans., 40 (2009), 982.
[12] N. Kim and H. Cho: J. Mater. Process. Tech.,
208 ( 2008 ), 211.
[13] H. Cho and T. Altan: J. Mater. Process. Tech.,
170 (2005), 64.
[14] D. Szeliga, J. Gawad and M. Pietrzy: Comput.
Methods Appl. Mech. Eng., 195 (2006), 6778.
[15] R.K. Roy: Design of experiments using the
Taguchi approach-16 Step to product and process
International Journal of ISSI, Vol.8 (2011), No.1
33
improvement, Second ed., Wiley Interscience, New
York, (2001),
[16] G.P. Syrcos: J. Mat. Process. Tech., 135 (2003), 68.
[17] E. El-Danaf, S.R. Kalidindi and R.D. Doherty:
Metall. Mater. Trans. A, 30 (1999), 1223.
[18] A. Galiyev, R. Kaibyshev and G. Gottstein: Acta
Mater., 49 (2001), 1199.
[19] H.J. McQueen and C.A.C. Imbert: J. Alloy.
Compd. 378 (2004), 35.
[20] P. Dadras: J. Eng. Mater. Technol., 107 (1985), 97.
[21] C. Huang, E.B. Hawbolt, X. Chen, T.R.
Meadowcroft and D.K. Matlock: Acta Mater., 49
(2001), 1445.
[22] Y. Lee, B.M. Kim, K.J. Park, S.W. Seo and O.
Min: J. Mater. Process. Tech., 131 (2002), 181.
[23] A. Cingara and H.J. McQueen: J. Mater. Process.
Tech., 36 (1992), 31.
[24] R. Ebrahimi, S.H. Zahiri and A. Najafizadeh: J.
Mater. Process. Tech., 171 (2006), 301.
[25] E. Evangelista, M. Masini, M. El Mehtedi and S.
Spigarelli: J. Alloy. Compd., 378 (2004), 151.
[26] R. Ebrahimi and S. Solhjoo: Int. J. of ISSI, 4
(2007), 24.
)