The influence of TiO2 and Na2CO3 on the viscosity and crystallization behavior of mold powders

نوع مقاله : مقاله پژوهشی

نویسندگان


[1] R.W. Soares, M.V.A. Fonseca, R. Neuman, V.J.
Menezes, A.O. Lavinas and J. Dweck: Thermochim.
Acta, 318 (1998), 131.
[2] Y. Meng and B.G. Thomas: Metall. Mater. Trans.
B, 34(2003), 707.
[3] X. Qi, G.H. Wen and P. Tang, J. Non-Cryst. Solids.,
354 (2008), 5444.
[4] G. Wen, S. Sridhar, P. Tang, X. Qi and Y. Liu: ISIJ
Int., 47 (2007), 1117.
[5] A.B. Fox, K.C. Mills, D. Lever, C. Bezerra,
C. Valadares, I. Unamuno, J.J. Laraudogoitia and
J.Gisby: ISIJ Int., 45(2005), 1051.
[6] N.C. Machingawuta, S. Bagha and P. Grieveson:
Steelmaking Conference Proceedings, Washington,
D.C., 74(1991), 163.
[7] T. Cimarelli: Metall. Ital. Italy, 89(1997), 31.
[8] K.C. Mills, S. Sridhar, A.S. Normanton and S.T.
Mallaband: The Brimacombe Memorial Symposium,
Vancouver, (2000), 781.
[9] J. Cho, H. Shibata, T. Emi and M. Suzuki: ISIJ Int.
38(1998), 440.
[10] K.W. Yi, Y.T. Kim and D.Y. Kim, Met. Mater. Int.
,13 (2007), 223.
[11] S.Y. Choi, D.H. Lee, D.W. Shin, J.W. Cho
and J.M. Park: Journal of Non-Crystalline Solids,
345&346 (2004), 157.
[12] A. Yamauchi, K. Sorimachi and T. Yamauchi:
Ironmak. Steelmak., 29(2002), 203.
[13] D.T. Stone and B.G. Thomas: Canadian
Metallurgical Quarterly, Netherlands, 38(1999), 363.
[14] R. Carli and C. Righi:7thInternational Conference
on Molten Slags Fluxes and Salts, The South African
Institute of Mining and Metallurgy, (2004), 821.
[15] K.C. Mills, A.B. Fox, R.P. Thackray and Z. Li:
7thInternational Conference on Molten Slags Fluxes
and Salts, The South African Institute of Mining and
Metallurgy, (2004).
[16] R. Taylor and K.C. Mills: Ironmak. Steelmak. 15
(1988), 187.
[17] T. Watanabe, H. Fukuyama and K. Nagata, ISIJ
Int., 42 (2002), 489.
[18] C. Righi, R. Carli and V. Ghilardi: Proceedings
6th International Conference on Molten Slags Fluxes
and Salts, Stockholm Helsinki, (2000).
[19] M.L. Koul, S. Sankaranarayanan, D. Apelian and
W.L. McCaulery, Press of Northeast University of
Technology, (1988), 2.
[20] K.C. Mills, L. Courtney, A.B. Fox, B. Harris, Z.
Idoyaga and M.J. Richardson: Thermochim. Acta, 391
(2002), 175