Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
[1] A. Simchi, H. Danninger and C. Gierl: Powder Metall, 44(2001) and 148.
[2] U. Engström, D. Milligan and A. Klekovkin: Metall Powder Report, 61(2006), 36.
[3] S. Berg and B. Maroli: PM2TEC, MPIF, Orlando, USA, (2002), 17.
[4] S. Kremel, H. Danninger and Y. Yu: Powder Metall Progress, 2(2002), 211.
[5] U. Engström and R. Frykholm: Metal Powder Report, 62(2007), 18.
[6] B. Hu, A. Klekovkin, D. Milligan, S. Berg, B. Maroli and U.Engström: North American Höganäs, USA & Höganäs AB, Sweden, MPIF, (2002).
[7] H. Danninger and C. Xu: Proc. EuroPM, Valencia, EPMA Shrewsbury, 1(2003), 269.
[8] M. Azadbeh, H. Danninger and C. Gierl: Int. Conf. on Powder Metallurgy and Particulate Materials (PowderMet 2009), Las Vegas, USA, (Select Manuscript, PM Industries NewsLine, 7(2010).
[9] P. Luukkonen, E. Hjorstsberg and T. Ericsson: Powder Metall., 46(2003), 335.
[10] M. Azadbeh, H. Danninger and C. Gierl: Powder Metall. Progress, 7(2007), 128.
[11] S. Kremel, C. Raab and H. Danninger: Proc. of the Euro PM, Nice, EPMA Shrewsbury, 1(2001), 40.
[12] M. Azadbeh, H. Danninger and C. Gierl: Int. Conf. on Powder Metallurgy & Particulate Materials (PowderMet 2009), Las Vegas, USA. (Select Manuscript, PM Industries NewsLine, 7(2010).
[13] M. Azadbeh, H. Danninger and C. Gierl: Powder Metall. Progress, 8(2008), 83.
[14] H. Danninger, C. Gierl, S. Kremel, G. Leitner, K. Jaenicke-Rößler and Y. Yu: Powder Metall. Progress, 2(2002), 125.
[2] U. Engström, D. Milligan and A. Klekovkin: Metall Powder Report, 61(2006), 36.
[3] S. Berg and B. Maroli: PM2TEC, MPIF, Orlando, USA, (2002), 17.
[4] S. Kremel, H. Danninger and Y. Yu: Powder Metall Progress, 2(2002), 211.
[5] U. Engström and R. Frykholm: Metal Powder Report, 62(2007), 18.
[6] B. Hu, A. Klekovkin, D. Milligan, S. Berg, B. Maroli and U.Engström: North American Höganäs, USA & Höganäs AB, Sweden, MPIF, (2002).
[7] H. Danninger and C. Xu: Proc. EuroPM, Valencia, EPMA Shrewsbury, 1(2003), 269.
[8] M. Azadbeh, H. Danninger and C. Gierl: Int. Conf. on Powder Metallurgy and Particulate Materials (PowderMet 2009), Las Vegas, USA, (Select Manuscript, PM Industries NewsLine, 7(2010).
[9] P. Luukkonen, E. Hjorstsberg and T. Ericsson: Powder Metall., 46(2003), 335.
[10] M. Azadbeh, H. Danninger and C. Gierl: Powder Metall. Progress, 7(2007), 128.
[11] S. Kremel, C. Raab and H. Danninger: Proc. of the Euro PM, Nice, EPMA Shrewsbury, 1(2001), 40.
[12] M. Azadbeh, H. Danninger and C. Gierl: Int. Conf. on Powder Metallurgy & Particulate Materials (PowderMet 2009), Las Vegas, USA. (Select Manuscript, PM Industries NewsLine, 7(2010).
[13] M. Azadbeh, H. Danninger and C. Gierl: Powder Metall. Progress, 8(2008), 83.
[14] H. Danninger, C. Gierl, S. Kremel, G. Leitner, K. Jaenicke-Rößler and Y. Yu: Powder Metall. Progress, 2(2002), 125.
)