Effect of ageing heat treatment on corrosion behaviorof 17-4 PH stainless steel in 3.5% NaCl
[1] J.R. Davis, ASM Specialty Handbook Stainless Steel, Volume 34, 1994, ASM International, Materials Park.
[2] C.N. Hsiao, C.S. Chiou and J.R. Yong: Mater. Chem. Phys., 74 (2002), 132.
[3] W. Jun, Z. Hong, L. Cong, Q. Shao-Yu and S. Bao-Luo: Nucl. Eng. Des, 236 (2006), 2531.
[4] J.D. Bressan, D.P. Daros, A. Sokolowski, R.A. Mesquita and C.A. Barbosa: J. Mater. Process. Technol., 205, 2008, 353-359.
[5] J. Hung Wu, C. Kung Lin: J. Mater. Sci., 38 (2003), 965.
[6] M. Murayama, Y. Katayama and K. Hono: Metall. Mater. Trans. A., 30A (1999), 345.
[7] W.C. Chiang, C.C. Pu, B.L. Yu and J.K. Wu: Mater. Lett., 57 (2003), 2485.
[8] AK steel, 17-4PH stainless steel product Data Bulletin, 2000, AK steel corporation, Middleton.
[9] Gui-jiang Li, Jun Wang, Qian Peng, Cong Li, Ying Wang and Bao-luo Shen: Nucl. Instrum. Meth. B, 266 (2008), 1964.
[10] A.J. Sedriks, Corr osion of stainless steel, 2th edn, 1996, John Wiley & Sons, p.124.
[11] A. U. Malik, N.A. Siddiqi and I. N. Andijani: Desalination, 97 (1994), 189.
[12] J. Nowacki: J. Mater. Process. Technol., 157–158 (2004), 578.
[13] M.P. Satish Kumar, P. Bala Srinivasan: Mater. Lett., 62 (2008), 2887.
[14] ASTM A 705, Standard specification for age-hardening stainless steel forgings, 1996, Annual Book of ASTM standards.
[15] L. W. Tsay, W. C. Lee, R. K. Shiue and J. K. Wu: Corr. Sci., 44 (2002), 2101.
[16] 14. C. Garcia, F. Martin, P. de Tiedra, Y. Blanco and M. Lopez: Corr. Sci., 50 (2008), 1184.
[17] H. R. Habibi Bajguirani, Mat. Sci. Eng. A, 338 (2002), 142.
[2] C.N. Hsiao, C.S. Chiou and J.R. Yong: Mater. Chem. Phys., 74 (2002), 132.
[3] W. Jun, Z. Hong, L. Cong, Q. Shao-Yu and S. Bao-Luo: Nucl. Eng. Des, 236 (2006), 2531.
[4] J.D. Bressan, D.P. Daros, A. Sokolowski, R.A. Mesquita and C.A. Barbosa: J. Mater. Process. Technol., 205, 2008, 353-359.
[5] J. Hung Wu, C. Kung Lin: J. Mater. Sci., 38 (2003), 965.
[6] M. Murayama, Y. Katayama and K. Hono: Metall. Mater. Trans. A., 30A (1999), 345.
[7] W.C. Chiang, C.C. Pu, B.L. Yu and J.K. Wu: Mater. Lett., 57 (2003), 2485.
[8] AK steel, 17-4PH stainless steel product Data Bulletin, 2000, AK steel corporation, Middleton.
[9] Gui-jiang Li, Jun Wang, Qian Peng, Cong Li, Ying Wang and Bao-luo Shen: Nucl. Instrum. Meth. B, 266 (2008), 1964.
[10] A.J. Sedriks, Corr osion of stainless steel, 2th edn, 1996, John Wiley & Sons, p.124.
[11] A. U. Malik, N.A. Siddiqi and I. N. Andijani: Desalination, 97 (1994), 189.
[12] J. Nowacki: J. Mater. Process. Technol., 157–158 (2004), 578.
[13] M.P. Satish Kumar, P. Bala Srinivasan: Mater. Lett., 62 (2008), 2887.
[14] ASTM A 705, Standard specification for age-hardening stainless steel forgings, 1996, Annual Book of ASTM standards.
[15] L. W. Tsay, W. C. Lee, R. K. Shiue and J. K. Wu: Corr. Sci., 44 (2002), 2101.
[16] 14. C. Garcia, F. Martin, P. de Tiedra, Y. Blanco and M. Lopez: Corr. Sci., 50 (2008), 1184.
[17] H. R. Habibi Bajguirani, Mat. Sci. Eng. A, 338 (2002), 142.
)