Effect of Ti-microalloy Addition on the Formability and Mechanical Properties of a Low Carbon (ST14) Steel
[1] R. Mendoza, J. Huante, M. Alanis, C. Gonzalez-Rivera and JA. Juarez-Islas: Mater. Sci.Eng.A, 276(2000), 203.
[2] R. Yoda,I.Tsukatani, T. Inoue and T. Saito: ISIJ Int., 34(1994), 70.
[3] R. Mendoza, J. Camacho, G. Lugo, C. Lopez, L. Herrera, J. Reyes, C. Gonzalez and JA. Juarez-Islas: ISIJ Int., 37(1997), 176.
[4] S. Akamatsu, M. Hasebe, T. Senuma, Y. Matsumura and O. Akisue: ISIJ Int., 34(1994), 9.
[5] S. Carabajar, J. Merlin, V. Massardier and S. Chabanet. Mater. Sci.Eng.A, 281(2000), 132.
[6] S. Yim, P. Wray, KM. Tiitto, CI. Garcia and AJ. DeArdo: ISIJ Int. 43(2003), 1615.
[7] R. Lagneborg, T. Siweek, S. Zajac, B. Hutchinson: Scand. J. Metall., 28(1999), 250.
[8] F. Leysen, J. Neutjens, K. Mols, S. Vandeputte and Y. Houbaert: Mater. Sci. Forum, BasqueCountry,Spain, 284-286(1998), 263.
[9] D. Bai, J. Asante, M. Cooke and J. Dorricott: 43rd MWSP Conf. Proc., Vol XXXIX, ISS, Warrendale, PA; (2001), 543.
[10] EJ. Palmiere, CI. Garcia and AJ. DeArdo: Mater. Sci. Forum, BasqueCountry,Spain; 284-286(1998), 151.
[11] M.A. Akoy, E.S. Kayali and H. Cimenoglu: ISIJ Int. 44(2004), 422.
[12] B. Engle: Proc. of Inter. Sympo.Niobium,Florida,USA, (2000), 675.
[13] V. Thillou, M. Hua, CI. Garcia, C. Perdrix and AJ. DeArdo: Mater. Sci.. Forum, BasqueCountry,Spain; 284-286(1998), 311.
[14]I.Gupta and D. Battacharya: Pro. Int. Con. on Metallurgy of Vacuum-degassed Steel Products, TMS,Warrendale,PA, (1989), 43.
[15] WB. Hutchinson, KI. Nilsson and J. Hirch: Pro. Int. Con. on Metallurgy of Vacuum-degassed Steel Products, TMS,Warrendale,PA, (1990), 109.
[16]I.Tamura, C. Quchi, T. Tanaka and H. Sekine: Thermomechanical Processing of High Strength Low Alloy Steels. Butterworth: Butterworth & Co. Ltd,.(1988), 19.
[17] H. Kejian and T.N. Baker: Mater. Sci.Eng.A, 169(1993), 53.
[18] DO. Wilshynsky, DK. Matlock and G. Krauss: Pro. Int. Con. on Metallurgy of Vacuum-degassed Steel Products, TMS,Warrendale,PA, (1989), 247.
[19] H. Hayakawa, Y. Furuna, M. Shibata and N. Takahashi: Testu-to-Hagane; 69(1983), S594.
[20] W. B. Hutchinson, Int. Metals Rev.; 29(1984), 25.
[21] R. K. Ray, J. J. Jonas, and R.E. Hook: Int. Mat. Rev.; 39(1994) 129.
[22] K. Ushioda, N. Yoshinaga, K. Koyama and O. Akisue: Proc. Conf. on Physical Metallurgy of IF Steel, ISIJ,Tokyo, (1994), 227.
[23] KM. Titto, C. Jung, P. Wray, CI. Garcia and AJ. DeArdo: ISIJ Int., 44(2004), 404.
[24] S. Wang: Mater. Sci. Eng. A, 145(1991), 87.
[25] M. R. Toroghinejad, A.O. Humphreys, D. Liu, F. Ashrafizadeh, A. Najafizadeh, J. J. Jonas: Metall. Mater. Trans.: 34(2003), 1163.
)