Carbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al
[1] H. K. D. H. Bhadeshia: Bainite in Steels, The Institute of Materials,CambridgeUniversityPress, (1992), 181.
[2] H. K. D. H. Bhadeshia and D. V.Edmonds: The Bainite Transformation in a Silicon Steel, Metallurgical Trans., American Society for Metals and the Metallurgical Society of AIME, 10A (1979), 895.
[3] J. Aranzabal,I.Gutierrez and J. J. Urcola: Mater. Sci. Tech., 10, (1994), 728.
[4] L. Sidjanin, R. E. Smallman and S. M. Boutorabi: Mater. Sci. Tech., 10, (1994), 711.
[5] A. Honarbakhsh-Raouf: Ph.D. Thesis,UniversityofLeeds, (1997).
[6] J. M Mallia: Ph.D. Thesis,UniversityofMalta, May (1998).
[7] M. J. Perez, H. Calderon, E. Valdes and M. M. Cisneros: A Microstructural Study of Austempered Ductile Iron Using TEM, Electron Microscopy, Vol. II, (1998), 225.
[8] S. M. A. Boutorabi, J. M. Young and V. Kondic: Trans. Japan Foundrymen’s Soc., 12 (1993a), 14.
[9] S. M. A. Boutorabi, J. M. Young and V. Kondic: Hardness and Tensile Properties of Austempered Aluminium Containing Ductile Iron, Int. J. of Cast Metals Res. (UK), 6 (1993b), 170.
[10] A. R. Kiani-Rashid: The Influence of Aluminium and Heat Treatment Conditions on Austempered Ductile Irons, Ph.D. Thesis, University of Leeds, (2000).
[11] J. G. Pearce and K. Bromage: Copper in Cast Iron, Hutchinson & Co. (Publishers) Ltd.,London, (1965), 13.
[12] H. T. Angus: Cast Iron, Physical and Engineering Properties, Butterworths & Co (Publishers) Ltd.,London, (1978), 131.
[13] A. R. Kiani-Rashid and D. V.Edmonds: Graphite Phase Formation in Al–Alloyed Ductile Irons, Int. J. ofEng., 15 (2002), 261.
[14] R. P. Walson: Aluminium Alloyed Cast Iron Properties Used in Design”,AFSTrans., 85 (1977), 51.
[15] R. J. Smickly and K. B. Rundman: The Effect of Aluminium on the Structure and Properties of Grey Cast Iron,AFSTrans., 89 (1981), 205.
[16] H. K. D. H. Bhadeshia and D. V.Edmonds: Bainite in Silicon Steels, New Composition-Property Approach Part 1, Metal Sci., 17 (1983), 411.
[17] S. M. A. Boutorabi: The Austempering Kinetics, Microstructure and Mechanical Properties of Spheroidal Graphite Unalloyed Aluminium Cast Iron, Ph.D. Thesis,UniversityofBirmingham, (1991).
[18] R. Elliott: Cast Iron Technology, Butterworths & Co. (Publishers) Ltd.,London, (1988).
[19] L. Sidjanin and R. E. Smallman: Metallography of Bainitic Transformation in Austempered Ductile Iron, Mater. Sci. Tech., 8 (1992), 1095.
)