The Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering
R.Elliott: Cast Iron Technology, Butterworths
London, (1988).
[2] I.C.H.Hughes: Ductile Iron, Metals Handbook,
Casting, Vol.15 BCIRA Int. Center for Cast Metals
Tech., Great Britain, Ninth edition, (1988), 647.
[3] R.Rimmer Mater World, 5(1997), 252.
[4] E.S.Davenport and E.C.Bain, Trans. Met. Soc.
AIME, 90(1930), 117.
[5] H.T.Angus, Cast Iron, Physical and Engineering
Properties, Butterworths , London, (1978).
[6] S.M.A.Boutorabi, J.M.Young, V.Kondic and
M.Salehi, Wear, 165(1993a), 19.
[7] H.Bayati and R.Elliott, Mater. Sci. Tech.,
11(1995), 284.
[8] J.Aranzabal, I.Gutierrez, J.M.Rodriguez-Ibabe
and J.J.Urcola, Mater. Sci. Tech., 8(1992), 263.
[9] N.Darwish and R.Elliott, Mater. Sci. Tech.,
9(1993b), 882.
[10] A.Honarbakhsh-Raouf: The Phase Transformation
in Austempered Ductile Iron, Ph.D. Thesis, School of
Materials, The University of Leeds UK.,(1997).
[11] C.Defrancq, J.Van Fegham and A.A.Desy, 36th
International Foundry Congress, Belgrad, (1969).
[12] R.P.Walson, AFS Trans., 85(1977), 51.
[13] R.J.Smickley and K.B.Rundman, AFS Trans.,
89(1981), 205.
[14] A.R.Kiani-Rashid: The Influence of Aluminium
and Heat Treatment Conditions on Austempered
Ductile Irons, Ph.D. Thesis, University of Leeds,
(2000).
[15] D.A.Porter and K.E.Easterling: Phase
Transformation in Metals and Alloys, Van Nostrand
Reinhold, (1981).
[16] H.K.D.H.Bhadeshia: Bainite in Steels, The
Institute of Materials, Cambridge University Press,
(1992).
[17] S.M.A.Boutorabi, J.M.Young and V.Kondic,
Trans. Japan Foundrymen’s Soc., 12, (1993a), 14.
[18] S.M.A.Boutorabi, J.M.Young and V.Kondic,
Int. J. Cast Metals Res. (UK),6(1993b), 170.
[19] J.G.Pearce and K.Bromage: Copper in Cast Iron,
Hutchinson ,London, (1965), 13.
[20] A.R.Kiani-Rashid and D.V.Edmonds, Int. J.
Eng.15 (2002), 261.
[21] S.M.A.Boutorabi: The Austempering Kinetics,
Microstructure and Mechanical Properties of
Spheroidal Graphite Unalloyed Aluminium Cast
Iron, Ph.D. Thesis, University of Birmingham,
(1991).
[22] E.A.Wilson, Metal Sci, 18(1984), 471.
[23] M.Umemoto, T.Furuhara and I.Tamura, Acta
Metall. 34(1986), 2235.
[24] J. Barford and W.S.Owen: JISI., 197(1961),
p 146.
[25] F.B.Pikering: The Structure and Properties of
Bainite in Steels, Climax Mo Co of Michigan,
(1967), 109.
London, (1988).
[2] I.C.H.Hughes: Ductile Iron, Metals Handbook,
Casting, Vol.15 BCIRA Int. Center for Cast Metals
Tech., Great Britain, Ninth edition, (1988), 647.
[3] R.Rimmer Mater World, 5(1997), 252.
[4] E.S.Davenport and E.C.Bain, Trans. Met. Soc.
AIME, 90(1930), 117.
[5] H.T.Angus, Cast Iron, Physical and Engineering
Properties, Butterworths , London, (1978).
[6] S.M.A.Boutorabi, J.M.Young, V.Kondic and
M.Salehi, Wear, 165(1993a), 19.
[7] H.Bayati and R.Elliott, Mater. Sci. Tech.,
11(1995), 284.
[8] J.Aranzabal, I.Gutierrez, J.M.Rodriguez-Ibabe
and J.J.Urcola, Mater. Sci. Tech., 8(1992), 263.
[9] N.Darwish and R.Elliott, Mater. Sci. Tech.,
9(1993b), 882.
[10] A.Honarbakhsh-Raouf: The Phase Transformation
in Austempered Ductile Iron, Ph.D. Thesis, School of
Materials, The University of Leeds UK.,(1997).
[11] C.Defrancq, J.Van Fegham and A.A.Desy, 36th
International Foundry Congress, Belgrad, (1969).
[12] R.P.Walson, AFS Trans., 85(1977), 51.
[13] R.J.Smickley and K.B.Rundman, AFS Trans.,
89(1981), 205.
[14] A.R.Kiani-Rashid: The Influence of Aluminium
and Heat Treatment Conditions on Austempered
Ductile Irons, Ph.D. Thesis, University of Leeds,
(2000).
[15] D.A.Porter and K.E.Easterling: Phase
Transformation in Metals and Alloys, Van Nostrand
Reinhold, (1981).
[16] H.K.D.H.Bhadeshia: Bainite in Steels, The
Institute of Materials, Cambridge University Press,
(1992).
[17] S.M.A.Boutorabi, J.M.Young and V.Kondic,
Trans. Japan Foundrymen’s Soc., 12, (1993a), 14.
[18] S.M.A.Boutorabi, J.M.Young and V.Kondic,
Int. J. Cast Metals Res. (UK),6(1993b), 170.
[19] J.G.Pearce and K.Bromage: Copper in Cast Iron,
Hutchinson ,London, (1965), 13.
[20] A.R.Kiani-Rashid and D.V.Edmonds, Int. J.
Eng.15 (2002), 261.
[21] S.M.A.Boutorabi: The Austempering Kinetics,
Microstructure and Mechanical Properties of
Spheroidal Graphite Unalloyed Aluminium Cast
Iron, Ph.D. Thesis, University of Birmingham,
(1991).
[22] E.A.Wilson, Metal Sci, 18(1984), 471.
[23] M.Umemoto, T.Furuhara and I.Tamura, Acta
Metall. 34(1986), 2235.
[24] J. Barford and W.S.Owen: JISI., 197(1961),
p 146.
[25] F.B.Pikering: The Structure and Properties of
Bainite in Steels, Climax Mo Co of Michigan,
(1967), 109.
)