افزایش خصوصیات سایشی فولاد ابزار HSS-M2 با افزودن کاربید تنگستن با روش SMAW

1. M. Khadem, O. V. Penkov, H. K. Yang, D. E. Kim, Tribology of multilayer coatings for wear reduction: A review, Friction, Vol. 5, pp. 248–262, 2017.
2. M.Riabkina-Fishman, E. Rabkin, P. Levin, N. Frage, M.P. Dariel, A. Weisheit, R. Galun, B.L. Mordike, Laser produced functionally graded tungsten carbid coatings on M2 High-speed tool steel, Materials Science and Engineering, Vol. 302,pp.106-114,2001.
3. Y.C.Lin, K.Y, Chang, Elucidating the microstructure and wear behavior of tungsten carbide multi-pass cladding on AISI 1050 steel, Journal of Materials Processing Technology, Vol. 210, pp.219-225, 2010.
4. M.F.Buchely, J.C.Gutierrez, L.M.Leon, A.Toro, The effect of microstructure on abrasive wear of hard facing alloys, Wear, Vol. 259, pp. 52-61, 2005.
5. S.F.Gnyusov, V.G.Durakov, S.Yu.Tarasov, Structure and abrasive wear of composite HSS M2/WC coating, Advances in Tribology, Vol. 2012, pp. 1-9, 2012.
6. S.W.Wang, Y.C.Lin, Y.Y.Tsai, The effects of various ceramic-metal on wear performance of clad layer, Journal of Materials Processing Technology, Vol. 140, pp. 682-687, 2003.
7. M.Bonek, “Formation of gradient surface layers on high-speed steel by laser surface alloying process”, Archives of Materials Science and Engineering, Vol. 58, pp. 182-192, 2012.

8.C.Roda-Vazquez, A.Loureiro, J.P.Cribeiro, Comportmiento frente al desgaste abrasivo de las aleaciones con tendencia a la formacion de carburos aplicados por soldadura, Mantenimiento, Vol. 134, pp.78-89, 2000.

9. G.B.Ottonello, Tungsten carbides, and welding, Welding International, Vol. 21, No. 8, pp.569-583, 2007.
10. N. Hashemi, Oxidative wear behavior of laser clad High-Speed Steel thick deposits: Influence of sliding speed, carbide type and morphology Surface and Coatings Technology Volume 315, 15 April 2017, Pages 519-529
11. V. M. Fomin, CO2 laser cladding heterogeneous ceramic-metal wear-resistant coatings, AIP Conference Proceedings 1770, 020015 (2016)
12. J. Huebner, Microstructural and Mechanical Study of Inconel 625 – Tungesten Carbid Composite Coatings Obtained by Powder Laser Cladding, Arch. Metall. Mater. 62 (2017), 2, 531-538
13. ASTM G65, Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus, Designation: G 65 – 00.

14.ASTM 11-384" Standard Test Method for Knoop and Vickers Hardness of Materials" Book of Standards, Vol. 03,.01, 2011.

15. Dantzig J. A., Chalmers ‎M. R., B., Solidification, EPFL press, Swiss, 2016.
16. Nelson, T., W., Lippold, J. C., and Mills, M. J., Weld. J., 78:329s, 1999.