Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel
P. W. Cleary: Miner Eng., 14(10)(2001), 1295.
S. Banisi, M. Hadizadeh: Miner Eng., 20(2)(2007), 132.
ASM Metal Handbook, Friction, lubrication and wear technology, Vol. 18, New York, American Society for metals, (1992), 1334.
H. Fu, Q. Xiao: Mater. Sci. Eng. A., 396(2005), 206.
J. Zhi-qiang, D. Jian-ming, F. Xi-lan: J. Iron Steel Res. Int., 13(1)(2006), 57.
ASM Metal Handbook, Heat treatment, Vol. 4, New York, American Society for metals, (1991), 367.
K. F. Wang, S. Chandrasekar, H.T.Y. Yang: J. Manuf. Sci. Eng., 19(1997), 257.
[8] B. Xiao, G. Wang, Q. Wang, M. Maniruzzaman, R. D. Sisson, Y. Rong: J. Mate. Eng. Perform., 20(2011), 1264.
R. W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons Inc.,
(1996).
K. F. Wang, S. Chandrasekar, H.T.Y. Yang: J. of Manuf. Sci. Eng., 11(1997), 257.
H. Hasan, J. Peet, M. Jalil, H. Bhadeshia: Heat Treat. Met., Metals2011, 47, 315–321.
F. P. Incropera, D. P. DeWitt, T. L. Bergman, A. S. Lavine: Introduction to Heat Transfer, John Wiley & Sons, Inc., (2011).
V. Javaheri, H. Rastegari, M. Naseri, M. R. Haghighi: 4th Int. Conf. & 9th Cong. Iranian Metall. Eng. Soc. & Iranian foundrymen's Soc., (2015), Iran University of Science and Technology, Tehran, Iran (in Persian).
J. D. Verhoeven and E. D. Gibson: Metall. Mater. Trans. A., 29A(1998), 1181.
S. Banisi, M. Hadizadeh: Miner Eng., 20(2)(2007), 132.
ASM Metal Handbook, Friction, lubrication and wear technology, Vol. 18, New York, American Society for metals, (1992), 1334.
H. Fu, Q. Xiao: Mater. Sci. Eng. A., 396(2005), 206.
J. Zhi-qiang, D. Jian-ming, F. Xi-lan: J. Iron Steel Res. Int., 13(1)(2006), 57.
ASM Metal Handbook, Heat treatment, Vol. 4, New York, American Society for metals, (1991), 367.
K. F. Wang, S. Chandrasekar, H.T.Y. Yang: J. Manuf. Sci. Eng., 19(1997), 257.
[8] B. Xiao, G. Wang, Q. Wang, M. Maniruzzaman, R. D. Sisson, Y. Rong: J. Mate. Eng. Perform., 20(2011), 1264.
R. W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons Inc.,
(1996).
K. F. Wang, S. Chandrasekar, H.T.Y. Yang: J. of Manuf. Sci. Eng., 11(1997), 257.
H. Hasan, J. Peet, M. Jalil, H. Bhadeshia: Heat Treat. Met., Metals2011, 47, 315–321.
F. P. Incropera, D. P. DeWitt, T. L. Bergman, A. S. Lavine: Introduction to Heat Transfer, John Wiley & Sons, Inc., (2011).
V. Javaheri, H. Rastegari, M. Naseri, M. R. Haghighi: 4th Int. Conf. & 9th Cong. Iranian Metall. Eng. Soc. & Iranian foundrymen's Soc., (2015), Iran University of Science and Technology, Tehran, Iran (in Persian).
J. D. Verhoeven and E. D. Gibson: Metall. Mater. Trans. A., 29A(1998), 1181.
)