The Most Cost Effective Gas Cleaning Device in Steel Industry with Industrial Ecology Approach
R. Lifset, R. Anex: J. Ind. Ecol., 13(2009), 347.
A. Garner, A. Keoleian: Industrial Ecology: an Introduction, National Pollution Prevention Center for Higher
Education, (1994).
A. Erazi, M. Ezzati, H. Zavvari: Proc. of Steel Symp. on Solution for optimization of energy in steel industries.,
(2009), 831.
M. H. Joulazadeh: Proc. of Steel Symp. on Research on energy consumption of steel industry., (2006).
E. S. Manahan: Industrial Ecology: Environmental Chemistry and Hazardous Waste Cleaner Production, Taylor & Francis, (1999).
J. Krupnick, D. Burtraraw: Resour. Resour. Energy. Econ., 18(1996), 423.
P. Harley: Safety and health in the iron and steel industry, International Labor Office, Geneva, (2005), 49.
G. Berwick: New technology can drastically reduce global warming, QAM, Canada, (2010).
T. Wayne: Air pollution Engineering Manual, John Wiley and sons, (2000), 632.
V. Schmatloch: J. Electrostat., 63(2005), 85.
J. Podliński, J. Dekowski, J. Mizeraczyk, D. Brocil, K. Urashima and J. S. Chang: J. Electrostat., 64(2006), 498.
J. R. Couper, W.R. Penney: Chemical Process Equipment, Elsevier Science, (2012), 691.
N. P. Cheremisinoff: Handbook of Air Pollution Prevention and Control, Elsevier Science, USA, (2002).
J. Hautanen, K. Janka, J. Koskinen, T. Kivisto, M. Lehtimaki: J. Aerosol. Sci., 17(1986), 622.
L. Linmao, J. Guo, J. Li and L. Sheng: J. Electrostat., 48(2000), 81.
R. S. Islamov, Y. A. Krishtafovich: J. Electrostat., 69(2011).
C. Jakober, T. Phillips: Evaluation of ozone emission from portable indoor air cleaner electrostatic precipitators and ionizer, Staff Technical Report, (2008).
N. D. Nevers: Air pollution control engineering, McGraw-Hill, (2000).
I. E. Agranovski, J. M. Whitcombe: J. Aerosol. Sci., 31(2000), 164.
S. Calle, D. Bemer: Powder. Technol., 128(2002), 213.
X. Simon, D. Bemer, S. Chazelet, D. Thomas and R. Regnier: Powder. Technol., 201(2013), 37.
Karbasi, M. A. Shafizade: Environment Management Plants, Iran Energy Efficiency Organization, (2005) (in Persian).
A. C. Caputo, P. M. Pelagagge: Environ. Manage. Health., 10(1999), 96.
J. Korhonen: J. Cleaner. Prod., 12(2004), 809.
D. C. Mussatti, W.M. Vatavuk: EPA Air pollution control cost manual, United States Environmental Protection Agency, (2015).
ACGIH: Industrial ventilation, Michigan, USA, (2002).
C.D. Cooper, F. C: Alley Air pollution control a design approach, Waveland Pr Inc, (2009).
S. Panich: Resour. Conserv. Recy., 16(1996), 71.
S. Baha: How can we reduce the energy consumption of pulse-jet dust collectors in order to reap economic, Ecological and Social Benefits, Thesis, Royal Roads University, (2005).
M. Sillanpaa, et al: J. Aerosol. Sci., 39(2008), 335.
A. Garner, A. Keoleian: Industrial Ecology: an Introduction, National Pollution Prevention Center for Higher
Education, (1994).
A. Erazi, M. Ezzati, H. Zavvari: Proc. of Steel Symp. on Solution for optimization of energy in steel industries.,
(2009), 831.
M. H. Joulazadeh: Proc. of Steel Symp. on Research on energy consumption of steel industry., (2006).
E. S. Manahan: Industrial Ecology: Environmental Chemistry and Hazardous Waste Cleaner Production, Taylor & Francis, (1999).
J. Krupnick, D. Burtraraw: Resour. Resour. Energy. Econ., 18(1996), 423.
P. Harley: Safety and health in the iron and steel industry, International Labor Office, Geneva, (2005), 49.
G. Berwick: New technology can drastically reduce global warming, QAM, Canada, (2010).
T. Wayne: Air pollution Engineering Manual, John Wiley and sons, (2000), 632.
V. Schmatloch: J. Electrostat., 63(2005), 85.
J. Podliński, J. Dekowski, J. Mizeraczyk, D. Brocil, K. Urashima and J. S. Chang: J. Electrostat., 64(2006), 498.
J. R. Couper, W.R. Penney: Chemical Process Equipment, Elsevier Science, (2012), 691.
N. P. Cheremisinoff: Handbook of Air Pollution Prevention and Control, Elsevier Science, USA, (2002).
J. Hautanen, K. Janka, J. Koskinen, T. Kivisto, M. Lehtimaki: J. Aerosol. Sci., 17(1986), 622.
L. Linmao, J. Guo, J. Li and L. Sheng: J. Electrostat., 48(2000), 81.
R. S. Islamov, Y. A. Krishtafovich: J. Electrostat., 69(2011).
C. Jakober, T. Phillips: Evaluation of ozone emission from portable indoor air cleaner electrostatic precipitators and ionizer, Staff Technical Report, (2008).
N. D. Nevers: Air pollution control engineering, McGraw-Hill, (2000).
I. E. Agranovski, J. M. Whitcombe: J. Aerosol. Sci., 31(2000), 164.
S. Calle, D. Bemer: Powder. Technol., 128(2002), 213.
X. Simon, D. Bemer, S. Chazelet, D. Thomas and R. Regnier: Powder. Technol., 201(2013), 37.
Karbasi, M. A. Shafizade: Environment Management Plants, Iran Energy Efficiency Organization, (2005) (in Persian).
A. C. Caputo, P. M. Pelagagge: Environ. Manage. Health., 10(1999), 96.
J. Korhonen: J. Cleaner. Prod., 12(2004), 809.
D. C. Mussatti, W.M. Vatavuk: EPA Air pollution control cost manual, United States Environmental Protection Agency, (2015).
ACGIH: Industrial ventilation, Michigan, USA, (2002).
C.D. Cooper, F. C: Alley Air pollution control a design approach, Waveland Pr Inc, (2009).
S. Panich: Resour. Conserv. Recy., 16(1996), 71.
S. Baha: How can we reduce the energy consumption of pulse-jet dust collectors in order to reap economic, Ecological and Social Benefits, Thesis, Royal Roads University, (2005).
M. Sillanpaa, et al: J. Aerosol. Sci., 39(2008), 335.
)