Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel
B. Crossland: Explosive Welding of Metals and Its Applications, Oxford University Press, New York, (1982).
T. Z. Blazynski: Explosive Welding, Forming andCompaction, Applied Science Publishers, England, (1983).
M. Benak, M. Turna, M. Ozvold, P. Nesvadba, J. Lokaj, L. Caplovic, F. Kovac and V. Stoyka: Roznov pod Radhostem Czech Republic, EU, (2010), 235.
K. Raghukandan: J. Mater. Process. Tech., 139(2003), 573.
N. Kengkla, N. Tareelap: Proc. Conf. 1stMae., Fah Luang University, Thailand, (2012).
U. Kamachi Mudali, B. M. Ananda Rao, K. Shanmugam, R. Natarajan and B. Raj: J. Nucl. Mater., 321(2003), 40.
M. Acarer: J. Mater. Eng. Perform., 21(2012), 2379.
N. Kahraman and B. Gulenc: J. Mater. Process. Tech.,169(2005), 127.
N. Kahraman and B. Gulenc: Int. J. Impact. Eng., 34(2007), 1423.
H. R. Zareie Rajani, S. A. A. Akbari Mousavi and F. Madani Sani: Mater. Design., 43(2013), 467.
ASTM E8M, Standard Test Methods for Tension Testing of Metallic Materials, Book of Standards, 03.01, USA, (2006).
ASTM 384-11, Standard Test Method for Knoop and Vickers Hardness of Materials, Book of Standards, 03.01, USA, (2011).
ASTM G1-03, Preparing, Cleaning, and Evaluating Corrosion Test Specimens, Book of Standards, (2003).
M. L. Huang and L. Wang: Metall. Mater. Trans. A., 29(1998), 3037.
R. V. Tamhankar and J. Ramesam: Mater. Sci. Eng.,13(1974), 245.
S. A. A. Akbari Mousavi and P. FarhadiSartangi: Mater. Design., 30(2009), 459.
G. H. Liaghat, S. A . Dehghan Manshadi: Modares Mechanical Engineering, 10(2010), 54.
K. Hokamoto, T. Izuma, M. Fujita, M. Aoyagi: Welding Int., 6(1992), 941.
S. A. A. Akbari Mousavi and S. T. S Al-Hassani: J. Mech. Phys. Solids., 53(2005), 2501.
B. Gulenc: Mater. Sci. Eng., 29(2008), 275.
F. Findik: Mater. Sci. Eng., 32(2011), 1081.
A. M. A. Alsamuraee, H. A. Ameen and S. I. Jafer:
J. Sci. Ind. Res., 51(2011), 283.
S. A. Yahya and A. A. Rahim: Sains Malaysiana, 40(2011), 953.
M. R. Khanzadeh Gharah Shiran, S. J. Mohammadi Baygi, S. R. Kiahoseyni, H. Bakhtiari and Allah M. Dadi: Int. J. Damage. Mech., (2016), 1.
T. Z. Blazynski: Explosive Welding, Forming andCompaction, Applied Science Publishers, England, (1983).
M. Benak, M. Turna, M. Ozvold, P. Nesvadba, J. Lokaj, L. Caplovic, F. Kovac and V. Stoyka: Roznov pod Radhostem Czech Republic, EU, (2010), 235.
K. Raghukandan: J. Mater. Process. Tech., 139(2003), 573.
N. Kengkla, N. Tareelap: Proc. Conf. 1stMae., Fah Luang University, Thailand, (2012).
U. Kamachi Mudali, B. M. Ananda Rao, K. Shanmugam, R. Natarajan and B. Raj: J. Nucl. Mater., 321(2003), 40.
M. Acarer: J. Mater. Eng. Perform., 21(2012), 2379.
N. Kahraman and B. Gulenc: J. Mater. Process. Tech.,169(2005), 127.
N. Kahraman and B. Gulenc: Int. J. Impact. Eng., 34(2007), 1423.
H. R. Zareie Rajani, S. A. A. Akbari Mousavi and F. Madani Sani: Mater. Design., 43(2013), 467.
ASTM E8M, Standard Test Methods for Tension Testing of Metallic Materials, Book of Standards, 03.01, USA, (2006).
ASTM 384-11, Standard Test Method for Knoop and Vickers Hardness of Materials, Book of Standards, 03.01, USA, (2011).
ASTM G1-03, Preparing, Cleaning, and Evaluating Corrosion Test Specimens, Book of Standards, (2003).
M. L. Huang and L. Wang: Metall. Mater. Trans. A., 29(1998), 3037.
R. V. Tamhankar and J. Ramesam: Mater. Sci. Eng.,13(1974), 245.
S. A. A. Akbari Mousavi and P. FarhadiSartangi: Mater. Design., 30(2009), 459.
G. H. Liaghat, S. A . Dehghan Manshadi: Modares Mechanical Engineering, 10(2010), 54.
K. Hokamoto, T. Izuma, M. Fujita, M. Aoyagi: Welding Int., 6(1992), 941.
S. A. A. Akbari Mousavi and S. T. S Al-Hassani: J. Mech. Phys. Solids., 53(2005), 2501.
B. Gulenc: Mater. Sci. Eng., 29(2008), 275.
F. Findik: Mater. Sci. Eng., 32(2011), 1081.
A. M. A. Alsamuraee, H. A. Ameen and S. I. Jafer:
J. Sci. Ind. Res., 51(2011), 283.
S. A. Yahya and A. A. Rahim: Sains Malaysiana, 40(2011), 953.
M. R. Khanzadeh Gharah Shiran, S. J. Mohammadi Baygi, S. R. Kiahoseyni, H. Bakhtiari and Allah M. Dadi: Int. J. Damage. Mech., (2016), 1.
)