Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process
S. A. Rizvi and T. I. Khan: Trib. Int., 32(1999), 567.
T. I. Khan, S. A. Rizvi and K. Matsuura: Wear., 244(2000), 154.
C. Bournicon: Traitements Thermiques., 246(1991), 70.
R. Davis: Specialty Handbook, Tool Materials, ASM, (1995).
F. Nippes: Metals Handbook, Welding, Brazing and Soldering, ASM, (1991).
P. Fournier and A. Bennani: Bulletin du cercle d’Etudes des Metaux., 18,17.1, (2000).
J. N. Dupont, C. V. Robino and A. R. Marder: Weld. J., 77(1998), 417.
J. N. Dupont, C. V. Robino, A. R. Marder, M.R. Notis and J. R. Michael: Meta. Mater. Trans. A., 29, (1998), 2785.
G. A. Knorovsky, M. J. Cieslak, T. J. Headley, A.D.Romig and W.F. Hammetter: Meta. Mater. Trans. A., 20(1989), 2149.
T. Z. Blazynsky: Explosive forming welding and compaction, Applied Science Publisher LTD, (1983).
S. Ettaqi, L. Langlois and R. Bigot: Surf. Coat. Tech., 202(2008), 3306.
L. E. Murr, E. Ferreyra, S. Pap, J. M. Rivas, C. Kennedy, A. Ayapu, E. I. Garcia, J. C. Sanchez, W. Huang and C.S.Niou: Mat. Character., 37(1996), 245.
A. Durgutlu, H. Okuyucu and B. Gulenc: Mater. Des., 29(2008), 1480.
M. Acarer, B. Gulenc and F. Findik: Mater. Des., 24(2003), 659.
S. A. A. Akbari Mousavi and S. T. S. Al-Hassani: J. Mech. Phys. Sol., 12(2005), 251.
S.A.A. Akbari Mousavi and S.T.S. Al-Hassani: Mater & Des., 29, (2008), 1.
S.A.A. Akbari Mousavi, S.J. Burley and S. T. S. Al-Hassani: Imp. Eng., 31(2005), 719.
S.A.A. Akbari Mousavi, S.T.S. Al-Hassani, W. Byers Brown, and S. J. Burley: Propellants, Explosives, Pyrotechnics, 29(2004), 188.
S.T.S. Al-Hassani, M. Chizari, and L. M. Barret: Mate. Proc. Techn., 209(2009), 445.
F. Grignon, D. Benson, K. S. Vecchio and M. A. Meyers: Imp. Eng., 30(2004), 1333.
S.A.A. Akbari Mousavi, S.T.S. Al-Hassani and S. J.Burley: Int. J. Imp. Eng., 31(2005), 719.
K. N. Singh, R. Clos,U. Schreppel, P. Veit, A. Hamann, D. Klingbeil, R. Sievert and G. Künecke: Technische Mechanik., 23(2003), 205.
E. Uhlmann, M. Graf von der Schulenburg and R. Zettier: CIRP. Manu. Tech., 56, (2007), 61.
H. Yan, J. Hua and R. Shivpuri: Mater. Des., 28(2007), 272.
S.A.A. Akbari Mousavi and P. Sartangi, Mater. Des., 30(2009), 459.
J. Song, A. Kostka, M. Veehmayer and D. Raabe: Mat. Sci. Eng. A., 528, (2011), 2641.
C. H. Ambler: Ph. D Thesis, the University of Texas at El Paso, (2005).
Y. B. Yana, Z.W. Zhang, W. Shen, J.H. Wang, L.K. Zhang and B.A. Chin: Mat. Sci. Eng. A., 527(2010), 2241.
F. Montheillet and J. P .Thomas: Metallic materials with high structural efficiency, Kluwer academic publisher, (2004), 357.
T. I. Khan, S. A. Rizvi and K. Matsuura: Wear., 244(2000), 154.
C. Bournicon: Traitements Thermiques., 246(1991), 70.
R. Davis: Specialty Handbook, Tool Materials, ASM, (1995).
F. Nippes: Metals Handbook, Welding, Brazing and Soldering, ASM, (1991).
P. Fournier and A. Bennani: Bulletin du cercle d’Etudes des Metaux., 18,17.1, (2000).
J. N. Dupont, C. V. Robino and A. R. Marder: Weld. J., 77(1998), 417.
J. N. Dupont, C. V. Robino, A. R. Marder, M.R. Notis and J. R. Michael: Meta. Mater. Trans. A., 29, (1998), 2785.
G. A. Knorovsky, M. J. Cieslak, T. J. Headley, A.D.Romig and W.F. Hammetter: Meta. Mater. Trans. A., 20(1989), 2149.
T. Z. Blazynsky: Explosive forming welding and compaction, Applied Science Publisher LTD, (1983).
S. Ettaqi, L. Langlois and R. Bigot: Surf. Coat. Tech., 202(2008), 3306.
L. E. Murr, E. Ferreyra, S. Pap, J. M. Rivas, C. Kennedy, A. Ayapu, E. I. Garcia, J. C. Sanchez, W. Huang and C.S.Niou: Mat. Character., 37(1996), 245.
A. Durgutlu, H. Okuyucu and B. Gulenc: Mater. Des., 29(2008), 1480.
M. Acarer, B. Gulenc and F. Findik: Mater. Des., 24(2003), 659.
S. A. A. Akbari Mousavi and S. T. S. Al-Hassani: J. Mech. Phys. Sol., 12(2005), 251.
S.A.A. Akbari Mousavi and S.T.S. Al-Hassani: Mater & Des., 29, (2008), 1.
S.A.A. Akbari Mousavi, S.J. Burley and S. T. S. Al-Hassani: Imp. Eng., 31(2005), 719.
S.A.A. Akbari Mousavi, S.T.S. Al-Hassani, W. Byers Brown, and S. J. Burley: Propellants, Explosives, Pyrotechnics, 29(2004), 188.
S.T.S. Al-Hassani, M. Chizari, and L. M. Barret: Mate. Proc. Techn., 209(2009), 445.
F. Grignon, D. Benson, K. S. Vecchio and M. A. Meyers: Imp. Eng., 30(2004), 1333.
S.A.A. Akbari Mousavi, S.T.S. Al-Hassani and S. J.Burley: Int. J. Imp. Eng., 31(2005), 719.
K. N. Singh, R. Clos,U. Schreppel, P. Veit, A. Hamann, D. Klingbeil, R. Sievert and G. Künecke: Technische Mechanik., 23(2003), 205.
E. Uhlmann, M. Graf von der Schulenburg and R. Zettier: CIRP. Manu. Tech., 56, (2007), 61.
H. Yan, J. Hua and R. Shivpuri: Mater. Des., 28(2007), 272.
S.A.A. Akbari Mousavi and P. Sartangi, Mater. Des., 30(2009), 459.
J. Song, A. Kostka, M. Veehmayer and D. Raabe: Mat. Sci. Eng. A., 528, (2011), 2641.
C. H. Ambler: Ph. D Thesis, the University of Texas at El Paso, (2005).
Y. B. Yana, Z.W. Zhang, W. Shen, J.H. Wang, L.K. Zhang and B.A. Chin: Mat. Sci. Eng. A., 527(2010), 2241.
F. Montheillet and J. P .Thomas: Metallic materials with high structural efficiency, Kluwer academic publisher, (2004), 357.
)