A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process
J. Beddoes and J. G. Parr: Introduction to stainless steels, 3rd. Technology & Engineering, ASM International,
(1999).
D. A. Jones: Principles and prevention of corrosion, 2nd ed., Prentice Hall, London. (1996).
C.-O. Olsson and D. Landolt: Electrochim. Acta,48 (2003), 1093.
S. Rudenja: Sur. Coat. Technol. 114 (1999), 129.
H.-P. Feng , C.-H. Hsu, J.-K. Lu and Y.-H. Shy:Mater. Sci. Eng., A 347 (2003), 123.
R. A. Antunes, A. C. D. Rodas, N. B. Lima, O. Z.Higa and I. Costa: Sur. Coat. Technol., 205 (2010) , 2074.
Q. Pan, W. Huang, R. Song, Y. Zhou and G. Zhang: Sur. Coat. Technol., 102 (1998) , 245.
M. Lei and Z. Zhang: J. Vac. Sci. Technol. A 15 (1997) , 421.
L. Gil et al.: Sur. Coat. Technol., 201 (2006) , 4424.
F. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, Elsevier (1995).
F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati and R. Surkialiabad: Mat. Sci. Eng., A 527(2010) , 7334.
K. Tomimura, S. Takaki and Y. Tokunaga: ISIJ Int., 31 (1991 ) 1431.
K. Ralston and N. Birbilis: Corrosion 66 (2010), 075005.
L. Jinlong and L. Hongyun: Appl. Sur. Sci., 280(2013) , 124.
A. S. Hamada, L. P. Karjalainen and M. C. Somani:Mater. Sci.Eng., A 431 (2006) , 211.
A. Di Schino and J. Kenny: J. mater. sci. let., 21(2002) , 1631. formed on the specimen with the grain size of 500 nm
exhibited the highest failure resistance among all speciment.
X. Wang and D. Li, Wear, 255 (2003), 836.
Z. J. Zheng, Y. Gao, Y. Gui and M. Zhu: Corros.Sci., 54 (2012) , 60.
W. Ye, Y. Li and F. Wang: Electrochim. Acta, 51(2006) , 4426.
T. Balusamy, T. Sankara Narayanan, K. Ravichandran,I. S. Park and M. H. Lee: Corros. Sci. 74
(2013) , 332.
A. S. Fouda, F. E. Heakal and M. S. Radwan: J.Appl. Electrochem., 39 (2009), 391.
Y. Yang, B. Yan, J. Li and J. Wang, Corros. Sci.,53 (2011) , 3756.
X. Y. Wang and D. Y. Li: Mater. Sci. Eng., A 315(2001) , 158.
A. Q. Lü et al: Acta Metall. Sin. (Engl. Lett.), 19(2006) , 183.
W. D. Nix: Mater. Sci. Eng., A 234–236 (1997), 37.
H. Sidhom, T. Amadou and C. Braham: Metall.Mater. Trans., A 41 (2010) , 3136.
L. Liu, Y. Li and F. Wang: J. Mater. Sci. Technol,26 (2010) , 1.
K. Jüttner: Electrochim. Acta 35 (1990) , 1501.
Y. X. Qiao, Y. G. Zheng, W. Ke and P. C. Okafor:Corros. Sci., 51 (2009) , 979.
A. Kocijan, D. K. Merl and M. Jenko: Corros.Sci., 53 (2011) , 776.
R. G. Kelly, J. R. Scully, D. Shoesmith and R.G. Buchheit, Electrochemical techniques in corrosion science and engineering, CRC Press (2002).
C. Liu, Q. Bi, A. Leyland and A. Matthews: Corros. Sci., 45 (2003) , 1243.
I. D. Raistrick, D. R. Franceschetti and J. R. Macdonald: Impedance Spectroscopy. John Wiley & Sons, Inc., (2005), 27.
H. Luo, C. F. Dong, X. G. Li, K. Xiao: Electrochim.Acta, 64 (2012) , 211.
P. Li, J. Y. Lin, K. L. Tan and J. Y. Lee: Electrochim. Acta, 42 (1997) , 605.
(1999).
D. A. Jones: Principles and prevention of corrosion, 2nd ed., Prentice Hall, London. (1996).
C.-O. Olsson and D. Landolt: Electrochim. Acta,48 (2003), 1093.
S. Rudenja: Sur. Coat. Technol. 114 (1999), 129.
H.-P. Feng , C.-H. Hsu, J.-K. Lu and Y.-H. Shy:Mater. Sci. Eng., A 347 (2003), 123.
R. A. Antunes, A. C. D. Rodas, N. B. Lima, O. Z.Higa and I. Costa: Sur. Coat. Technol., 205 (2010) , 2074.
Q. Pan, W. Huang, R. Song, Y. Zhou and G. Zhang: Sur. Coat. Technol., 102 (1998) , 245.
M. Lei and Z. Zhang: J. Vac. Sci. Technol. A 15 (1997) , 421.
L. Gil et al.: Sur. Coat. Technol., 201 (2006) , 4424.
F. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, Elsevier (1995).
F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati and R. Surkialiabad: Mat. Sci. Eng., A 527(2010) , 7334.
K. Tomimura, S. Takaki and Y. Tokunaga: ISIJ Int., 31 (1991 ) 1431.
K. Ralston and N. Birbilis: Corrosion 66 (2010), 075005.
L. Jinlong and L. Hongyun: Appl. Sur. Sci., 280(2013) , 124.
A. S. Hamada, L. P. Karjalainen and M. C. Somani:Mater. Sci.Eng., A 431 (2006) , 211.
A. Di Schino and J. Kenny: J. mater. sci. let., 21(2002) , 1631. formed on the specimen with the grain size of 500 nm
exhibited the highest failure resistance among all speciment.
X. Wang and D. Li, Wear, 255 (2003), 836.
Z. J. Zheng, Y. Gao, Y. Gui and M. Zhu: Corros.Sci., 54 (2012) , 60.
W. Ye, Y. Li and F. Wang: Electrochim. Acta, 51(2006) , 4426.
T. Balusamy, T. Sankara Narayanan, K. Ravichandran,I. S. Park and M. H. Lee: Corros. Sci. 74
(2013) , 332.
A. S. Fouda, F. E. Heakal and M. S. Radwan: J.Appl. Electrochem., 39 (2009), 391.
Y. Yang, B. Yan, J. Li and J. Wang, Corros. Sci.,53 (2011) , 3756.
X. Y. Wang and D. Y. Li: Mater. Sci. Eng., A 315(2001) , 158.
A. Q. Lü et al: Acta Metall. Sin. (Engl. Lett.), 19(2006) , 183.
W. D. Nix: Mater. Sci. Eng., A 234–236 (1997), 37.
H. Sidhom, T. Amadou and C. Braham: Metall.Mater. Trans., A 41 (2010) , 3136.
L. Liu, Y. Li and F. Wang: J. Mater. Sci. Technol,26 (2010) , 1.
K. Jüttner: Electrochim. Acta 35 (1990) , 1501.
Y. X. Qiao, Y. G. Zheng, W. Ke and P. C. Okafor:Corros. Sci., 51 (2009) , 979.
A. Kocijan, D. K. Merl and M. Jenko: Corros.Sci., 53 (2011) , 776.
R. G. Kelly, J. R. Scully, D. Shoesmith and R.G. Buchheit, Electrochemical techniques in corrosion science and engineering, CRC Press (2002).
C. Liu, Q. Bi, A. Leyland and A. Matthews: Corros. Sci., 45 (2003) , 1243.
I. D. Raistrick, D. R. Franceschetti and J. R. Macdonald: Impedance Spectroscopy. John Wiley & Sons, Inc., (2005), 27.
H. Luo, C. F. Dong, X. G. Li, K. Xiao: Electrochim.Acta, 64 (2012) , 211.
P. Li, J. Y. Lin, K. L. Tan and J. Y. Lee: Electrochim. Acta, 42 (1997) , 605.
)