Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel
نوع مقاله : مقاله پژوهشی
نویسندگان
R. Datta, D. Mukerjee, S. Jha, K. Narasimhan, and R. Veeraraghavan: J. Mater. Eng Perform., 11(2002), 1.
E.J. Czyryca, D.P. Kihl, R. DeNale: AMPTIAC Quarterly., 7(2003), 63.
K. Padmanaban, R. Veeraragavan, RS. Babu, V. Anbalagan: Technical. Proc., National Welding Seminar, Bangalore, India, (1997), 216.
Z. Sterjovski, D.G. Carr, D.P. Dunne, S. Ambrose: Mat. Sci. Eng., 391(2005), 256.
ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualification, American Society of Mechanical Engineers, USA, (2010), 1.
AWS, Welding Handbook Vol. 4 Chapter 1, Carbon and low alloy steels, United States, (1999).
Z. Sterjovski, Investigation of Post weld Heat Treatment of Quenched and Tempered Pressure Vessel Steels, PhD thesis, University of Wollongong, Australia, (2003).
C.C. Huang, Y.C. Pan: J. Mater. Eng. Perform., 6(1997), 61.
H. K. D. H. Bhadeshia: ISIJ. Inter., 41(2001), 626.
G. Pimenta, F. Bastian: J. Mater. Eng. Perform., 10(2001),192.
S. Kou: Welding Metallurgy, 2nd Ed., Wiley-Inter science, New Jersey, (2003), 404.
E.J. Czyryca, D.P. Kihl, R. DeNale: AMPTIAC Quarterly., 7(2003), 63.
K. Padmanaban, R. Veeraragavan, RS. Babu, V. Anbalagan: Technical. Proc., National Welding Seminar, Bangalore, India, (1997), 216.
Z. Sterjovski, D.G. Carr, D.P. Dunne, S. Ambrose: Mat. Sci. Eng., 391(2005), 256.
ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualification, American Society of Mechanical Engineers, USA, (2010), 1.
AWS, Welding Handbook Vol. 4 Chapter 1, Carbon and low alloy steels, United States, (1999).
Z. Sterjovski, Investigation of Post weld Heat Treatment of Quenched and Tempered Pressure Vessel Steels, PhD thesis, University of Wollongong, Australia, (2003).
C.C. Huang, Y.C. Pan: J. Mater. Eng. Perform., 6(1997), 61.
H. K. D. H. Bhadeshia: ISIJ. Inter., 41(2001), 626.
G. Pimenta, F. Bastian: J. Mater. Eng. Perform., 10(2001),192.
S. Kou: Welding Metallurgy, 2nd Ed., Wiley-Inter science, New Jersey, (2003), 404.
)