Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels
J.R. Davis, ASM Specialty Handbook: Stainless Steel, Met al.s Park, OH, 1994.
V.S.A. Challa, X.L. Wan, M.C. Somani, L.P. Karjalainen, R.D.K. Misra: Mater. Sci. Eng A., 613 (2014), 60.
R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani, L.P. Karjalainen: Metall. Mat. Trans. A., 41(2010), 3.
S. Rajasekhara, P.J. Ferreira, L.P. Karjalainen, A. Kyröläinen: Metall. Mat. Trans A., 38 (2007), 202.
A. Momeni, S.M. Abbasi: J. Mater. Sci. Technol., 27 (2011), 338.
S. K. Varma, J. Kalyanam, L. E. Murk, V. Srinivas: J. Mater. Sci. Lett., 13(1994), 107.
T.H. Ahn, C.S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. George, H.N. Han: Scripta mat., 63 (2010) 540.
K. Sekido, T. Ohmura, T. Sawaguchi, M. Koyama,H.W. Park , K. Tsuzaki, Scripta mat., 65(2011), 942.
B.B. He, M.X. Huang, Z.Y. Liang, A.H.W. Ngan, H.W. Luo, J. Shi, W.Q. Cao and H. Dong: Scripta Mat., 69 (2013), 215.
G.B. Olsen., M. Cohen: Metall. Mat. Trans. A., 6 (1975), 791.
K.H. Lo , C.H. Shek, J.K.L. Lai: Mater. Sci. Eng R., 65 (2009), 39.
T. Kruml, J. Polak, S. Degallaix: Mater. Sci. Eng A., 293 (2000), 275.
C.X. Huang, G. Yang, Y.L. Gao, S.D. Wu, S.X. Li: J. Mater. Res., 22 (2007) 724.
S. Takaki, K. Tamimura, S.Ueda: ISIJ International., 34 (1994), 522.
R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani, L.P. Karjalainen: Metall. Mat. Trans. A., 40(2009), 2498.
C. P. Poole, F.J. Owens, Introduction to nanotechnology, Wiley Interscience publication, 2003.
K.L. Johnson, Contact mechanics, Cambridge university press, Cambridge, 1985.
W.C. Oliver, G.M. Pharr: J. Mater. Res., 7 (1992), 1564.
V.S.A. Challa, X.L. Wan, M.C. Somani, L.P. Karjalainen, R.D.K. Misra: Mater. Sci. Eng A., 613 (2014), 60.
R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani, L.P. Karjalainen: Metall. Mat. Trans. A., 41(2010), 3.
S. Rajasekhara, P.J. Ferreira, L.P. Karjalainen, A. Kyröläinen: Metall. Mat. Trans A., 38 (2007), 202.
A. Momeni, S.M. Abbasi: J. Mater. Sci. Technol., 27 (2011), 338.
S. K. Varma, J. Kalyanam, L. E. Murk, V. Srinivas: J. Mater. Sci. Lett., 13(1994), 107.
T.H. Ahn, C.S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. George, H.N. Han: Scripta mat., 63 (2010) 540.
K. Sekido, T. Ohmura, T. Sawaguchi, M. Koyama,H.W. Park , K. Tsuzaki, Scripta mat., 65(2011), 942.
B.B. He, M.X. Huang, Z.Y. Liang, A.H.W. Ngan, H.W. Luo, J. Shi, W.Q. Cao and H. Dong: Scripta Mat., 69 (2013), 215.
G.B. Olsen., M. Cohen: Metall. Mat. Trans. A., 6 (1975), 791.
K.H. Lo , C.H. Shek, J.K.L. Lai: Mater. Sci. Eng R., 65 (2009), 39.
T. Kruml, J. Polak, S. Degallaix: Mater. Sci. Eng A., 293 (2000), 275.
C.X. Huang, G. Yang, Y.L. Gao, S.D. Wu, S.X. Li: J. Mater. Res., 22 (2007) 724.
S. Takaki, K. Tamimura, S.Ueda: ISIJ International., 34 (1994), 522.
R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani, L.P. Karjalainen: Metall. Mat. Trans. A., 40(2009), 2498.
C. P. Poole, F.J. Owens, Introduction to nanotechnology, Wiley Interscience publication, 2003.
K.L. Johnson, Contact mechanics, Cambridge university press, Cambridge, 1985.
W.C. Oliver, G.M. Pharr: J. Mater. Res., 7 (1992), 1564.
)