@article { author = {Pakzaman, Hamid}, title = {The optimization of the aluminum deoxidation process to reduce non-metallic inclusions in steel products}, journal = {International Journal of Iron & Steel Society of Iran}, volume = {19}, number = {1}, pages = {1-7}, year = {2022}, publisher = {Iron & Steel Society of Iran}, issn = {2981-0388}, eissn = {2981-0396}, doi = {10.22034/ijissi.2022.551660.1230}, abstract = {Nowadays, clean liquid steel is crucial for improving castability, increasing production efficiency, and generating high-quality, customer-satisfying products. This research studied the influence of aluminum deoxidation process on the inclusion content in steel products. The image analysis technique and the calculation of inclusion volume fraction were used to assess the cleanliness of steel products. A total of 37 heats of typical medium carbon Al killed steel with aluminum contents in the 0.015-0.040 wt.% range were put to the test. The findings revealed that at least 70% of the total aluminum utilized in the tapping and ladle furnace (LF) must be added during the tapping process in order to produce a clean steel product with an inclusion volume fraction of less than 0.023%. Moreover, aluminum granules need to be added once throughout the LF process during the first 15 minutes of the process. In order to adjust the aluminum content in the liquid steel, the aluminum wire must be fed all at once at the last minute of the LF process.}, keywords = {Clean steel,Deoxidation,Aluminum,inclusion,Image analysis}, title_fa = {بهینه‌سازی عملیات اکسیژن‌زدایی مذاب با آلومینیم به منظور کاهش میزان آخال‌های غیرفلزی در محصولات فولادی}, abstract_fa = {امروزه تولید فولاد مذاب تمیز چه از لحاظ بهبود قابلیت ریخته‌گری و افزایش بهره‌وری تولید و چه از نظر تولید محصولات نهایی با کیفیت و خواص بالا و مورد رضایت مشتری از اهمیت بالایی برخوردار است. در این تحقیق، اثر متغیرهای مختلف در فرایند اکسیژن‌زدایی مذاب با آلومینیم بر روی میزان آخال در محصولات فولادی مورد بررسی قرار گرفت. به منظور ارزیابی میزان تمیزی محصولات فولادی از روش آنالیز تصویر و محاسبه کسر سطحی آخال استفاده شد. تعداد 37 ذوب مختلف از گرید فولادی DIN AF56 با محدوده آلومینیم 040/0-015/0 درصد مورد آزمایش قرار گرفت. نتایج نشان داد به منظور تولید محصول فولادی تمیز با کسر سطحی آخال کمتر از 023/0 درصد می‌بایست نسبت آلومینیم شارژ شده در طی فرایند تخلیه مذاب از کوره به کل آلومینیم مورد استفاده در تخلیه و کوره پاتیلی (LF)، حداقل 70% باشد. همچنین آلومینیم گرانول می‌بایست در 15 دقیقه ابتدایی فرایند LF و در یک مرتبه جهت اکسیژن‌زدایی مذاب افزوده شود. از سویی جهت تنظیم نهایی میزان آلومینیم در مذاب، سیم آلومینیم باید در یک نوبت و در یک دقیقه انتهایی عملیات LF، به درون مذاب شارژ شود.}, keywords_fa = {فولاد تمیز,اکسیژن‌زدایی,آلومینیم,آخال,آنالیز تصویر}, url = {https://journal.issiran.com/article_252646.html}, eprint = {https://journal.issiran.com/article_252646_3de43dd0185a4c1f1be14467e61ff913.pdf} }