International Journal of Iron & Steel Society of Iran

Keywords = microstructure

Number of Articles: 32

Effect of Intercritical Annealing Temperature and Time on Microstructure and Tensile Properties of a Step-Quenched Dual Phase Steel

Volume 22, Issue 1, June 2025, Pages 53-61

10.22034/ijissi.2025.2052973.1318

H. Ashrafi, Z. Soleimani Bistegani

Microstructure and Corrosion Behavior of Friction Stir-Welded DP600 Steel

Volume 21, Issue 1, November 2024, Pages 15-23

10.22034/ijissi.2024.2011682.1272

H. Ashrafi, M. Mohammadi

Effects of CeO2 Flux and Shielding Gas In A-TIG Welding on The Microstructure, Corrosion and Passive Film of Super Duplex Phase Stainless Steel 2507

Volume 21, Issue 1, November 2024, Pages 61-74

10.22034/ijissi.2024.2027101.1290

M. Guliani, َA. R. Ebrahimi

Effect of Laser Power on Microstructure and Tensile Properties of Laser Welded DP590 Steel Joints

Volume 20, Issue 1, June 2023, Pages 44-52

10.22034/ijissi.2024.2008540.1269

Hamid Ashrafi, Amir Reza Shahsavari, Ariyan Ghandi

Microstructure and Tensile properties of Laser Welded Joints between DP590 Steel and Plain Low Carbon Steel

Volume 20, Issue 1, June 2023, Pages 53-62

10.22034/ijissi.2024.2019085.1275

Hamid Ashrafi, Fatemeh Mashayekhi

Effect of tempering temperature on microstructure and work hardening behavior of a triple-phase AISI 4140 steel

Volume 18, Issue 2, September 2022, Pages 23-29

10.22034/ijissi.2022.76669.1132

Amir Talebi, R. Bakhtiari, B. Abbasi-Khazaei, Mehdi Ghobeiti-Hasab

A simple metallographic techniques for revealing austenite grain boundaries in CK45 steel

Volume 19, Issue 2, May 2022, Pages 1-4

10.22034/ijissi.2023.559015.1244

fatemeh Moosavi, H H Amel-Farzad

Investigation of simple shear extrusion steel mold and mechanical properties of nanostructured extruded samples of Al6061

Volume 18, Issue 1, January 2021, Pages 106-112

10.22034/ijissi.2021.540568.1211

Mostafa Balali, Mohsen Beynaghi, Mohammad Khosravi

The effects of vanadium on microstructure and wear resistance of high manganese steels

Volume 17, Issue 2, July 2020, Pages 46-55

10.22034/ijissi.2021.530512.1198

Arash Bagheriyeh, Saeed Kaviani

Investigation of the Effect of the Efficiency of Catalysts on Early Destruction of Direct Reduction Reformer Tubes.

Volume 17, Issue 2, July 2020, Pages 34-39

10.22034/ijissi.2021.523378.1181

Mojtaba Sadeghi, Sajad Abdollahi, Hadi Mahmoud Abadi

Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel

Volume 17, Issue 1, January 2020, Pages 1-10

10.22034/ijissi.2021.243773

Mostafa Jafarzadegan, Majid Ahangaryan, Reza Taghiabadi

Investigating the heat input effect of the GTAW process upon the microstructure and HAZ extension of HSLA-100 steel weld joints using thermal cycles

Volume 17, Issue 1, January 2020, Pages 57-69

10.22034/ijissi.2021.243777

Mahyar Darivandpour, Reza Dehmolaei, Khalil Ranjbar

The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel

Volume 16, Issue 2, September 2019, Pages 29-33

Z. Mahmoodzadeh, M. Tajally, H. Abdollah-Pour, H. Rastegary

Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process

Volume 16, Issue 2, September 2019, Pages 42-49

R. Amini Najafabadi, F. Salehi, T. Isfahani

Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel

Volume 15, Issue 2, December 2018, Pages 45-53

H. Rastegari, M. Lakhi, M. Farazi, M. R. Haghighi

Influence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel

Volume 14, Issue 2, December 2017, Pages 33-37

S. Abbasi, M. Esmailian, S. Ahangarani

The Effect of Two-stage Heat Treatment Temperatures on Initial and FSSWed Properties of TRIP Steels

Volume 14, Issue 1, July 2017, Pages 1-9

A. Mostafapour, A. Ebrahimpour

The Influence of HH Type Steel Microstructure on the Distortion Behavior of Grate Bar Part in the Indurating Machine of Pelletizing Plant

Volume 13, Issue 2, December 2016, Pages 7-12

M. Alizadeh, Y. Palizdar

Tribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel

Volume 13, Issue 2, December 2016, Pages 19-25

M. Rafiei, M. Shamanian, M. Salehi, H. Mostaan

The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel

Volume 12, Issue 2, December 2015, Pages 1-6

A Sonboli, M. R. Toroghinejad, H. Edris, J. A. Szpunar

Evaluation of the Melted Zone Microstructure in the Interface of the Dissimilar Weld between A335 Low Alloy Steel and ER309L Filler Metal by Gas Tungsten Arc Welding

Volume 11, Issue 2, June 2014, Pages 6-10

I. Hajiannia, M. Shamanian, M. Kasiri

Improving the Microstructure, Mechanical and Magnetic Properties of AISI 4340 Steel Using the Heat Treatment Process

Volume 10, Issue 2, December 2013, Pages 18-22

Z. Samadi Shahreza, G. Dini, A. Taherizadeh

The Effect of Controlled Thermo Mechanical Processing on the Properties of a High Strength Steel

Volume 10, Issue 2, December 2013, Pages 30-35

M. Heydarian

The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds

Volume 9, Issue 2, December 2012, Pages 14-18

I. Hajiannia, M. Shamanian, M. Kasiri

Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels

Volume 9, Issue 2, December 2012, Pages 32-38

M. Akbarzadeh, A. Shafyei, H. R. Salimijazi

International Journal of Iron & Steel Society of Iran

Journal Archive

Volume 22 (2025)

Volume 21 (2024)

Volume 20 (2023)

Volume 19 (2022)

Volume 18 (2021)

Volume 17 (2020)

Volume 16 (2019)

Volume 15 (2018)

Volume 14 (2017)

Volume 13 (2016)

Volume 12 (2015)

Volume 11 (2014)

Volume 10 (2013)

Volume 9 (2012)

Volume 8 (2011)

Volume 7 (2010)

Volume 6 (2009)

Volume 5 (2008)

Volume 4 (2007)

Volume 3 (2006)

Volume 2 (2005)

Volume 1 (2004)