A
-
Abbasi, S. M.
Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
-
Abyazi, A.
Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
-
Alikhani, S.
Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
-
Alizadeh, M.
Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting [Volume 5, Issue 2, 2008, Pages 1-7]
-
Amini Mashhadi, H.
An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
-
Ashrafizadeh, F.
Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
-
Ashrafizadeh, F.
Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various [Volume 5, Issue 2, 2008, Pages 29-35]
D
-
Dehmolaei, R.
Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
E
-
Ebrahimi, A. R.
Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
-
Emadi, R.
Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
-
Eskandari, M.
Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
H
-
Hadjari, A.
Physical Modeling of Steel Delivery during Thin Slab Continuous Casting [Volume 5, Issue 1, 2008, Pages 41-46]
-
Hosseini, S. R.
Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various [Volume 5, Issue 2, 2008, Pages 29-35]
J
-
Jenabali Jahromi, S. A.
Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting [Volume 5, Issue 2, 2008, Pages 1-7]
-
Joulazadeh, M. H.
Using Scrap Tires in EAFs as a Substitute for Carbon [Volume 5, Issue 1, 2008, Pages 36-40]
K
-
Karamian, E.
Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
-
Karimi, M.
Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
-
Kashefi, M.
Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
-
Kermanpur, A.
Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
-
Kermanpur, A.
Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
M
-
Meratian, M.
Physical Modeling of Steel Delivery during Thin Slab Continuous Casting [Volume 5, Issue 1, 2008, Pages 41-46]
-
Modarresi, S. M. H.
Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
-
Monshi, A.
Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
-
Monshi, A.
Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
N
-
Naffakh, H.
Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
-
Najafizadeh, A.
Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
P
-
Paghandeh, M.
Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
R
-
Rastgoo, A. R.
An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
S
-
Saboonchi, A.
Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method [Volume 5, Issue 1, 2008, Pages 1-7]
-
Safari, M.
Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method [Volume 5, Issue 1, 2008, Pages 1-7]
-
Salehian, A.
Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
-
Shamanian, M.
Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
-
Shamanian, M.
Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
-
Siadati, S. S.
Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
V
-
Vahdati Khaki, J.
An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
-
Vahdati Khaki, J.
Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
Your query does not match with any item