Author Index

A

  • Afkhami Aqda, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Akhbarizadeh, A. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Amini, K. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]
  • Amini, K. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Amini, K. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Arefpour, A. R. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Ashrafizadeh, F. A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]
  • Atapour, M. A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]

B

  • Bahrami, A. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]

D

  • Dana, M. M A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]
  • Dini, G. Observation of Stacking Fault Tetrahedral in TWIP Steel [Volume 12, Issue 2, 2015, Pages 46-49]

E

  • Edris, H. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]
  • Edris, H. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Estiri, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]

G

  • Ghasemi, R. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]
  • Ghayour, H. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Gheisari, H. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Golzar Shahri, M. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]

H

  • Heshmat Dehkordi, E. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Hosseini, S. R. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]

J

  • Jafari Fesharaki, P. Choice of Dust Collectors Based on Energy and Environmental Degradation in Steel Industries [Volume 12, Issue 1, 2015, Pages 33-36]
  • Javadpour, S. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Jenabali Jahromi, S. A. Effect of Heat Treatment Process on the Fatigue Behavior of AISI 1060 Steel [Volume 12, Issue 1, 2015, Pages 28-32]

K

  • Kadkhodaei, V. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Karamian, E. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Kheirollahi-Hosseinabadi, I. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]

M

  • Mehdinia, M. Effect of Heat Treatment Process on the Fatigue Behavior of AISI 1060 Steel [Volume 12, Issue 1, 2015, Pages 28-32]
  • Monshi, A. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Monshi, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Monshi, M. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]

R

  • Raeissi, K. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Rastegari, H. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]

S

  • Sabet, H. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]
  • Saidi, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Salehi, M. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]
  • Sanati, A. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Sehri, S.M. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Sepehrzad, R. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Shafiei, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Shafierad, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Sharifi, H. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]
  • Sonboli, A The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]
  • Szpunar, J. A. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]

T

  • Toroghinejad, M. R. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]

V

  • Vercammen, S. Observation of Stacking Fault Tetrahedral in TWIP Steel [Volume 12, Issue 2, 2015, Pages 46-49]