A
-
Abbasi, M. H.
The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
-
Abbaszadeh, H.
Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
-
Alizadeh, M.
Characterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry [Volume 7, Issue 1, 2010, Pages 21-24]
-
Alizadeh, M.
A simple Analytical model for solidification cooling rate based on the local heat flux density [Volume 7, Issue 2, 2010, Pages 34-44]
-
Amini, K.
The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
-
Araghchi, M.
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
-
Azadbeh, M.
Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
B
-
Behjati, P.
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
E
-
Ebrahimzadeh, R.
An Analytical model of the organizational culture evaluation in Iran steel industry: a survey research of Tuka Steel Investment Holding Company [Volume 7, Issue 1, 2010, Pages 1-10]
G
-
Gholizadeh, A.
An Analytical model of the organizational culture evaluation in Iran steel industry: a survey research of Tuka Steel Investment Holding Company [Volume 7, Issue 1, 2010, Pages 1-10]
H
-
Hosseini, A.
Characterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry [Volume 7, Issue 1, 2010, Pages 21-24]
-
Hosseini Nasab, F.
X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]
-
Hossein Nedjad, S.
X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]
J
-
Jenabali-Jahromi, S.
A simple Analytical model for solidification cooling rate based on the local heat flux density [Volume 7, Issue 2, 2010, Pages 34-44]
K
-
Kahrobaee, S.
Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
-
Kalantari, A.
Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
-
Kashefi, M.
Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
M
-
Mahdavi, R.
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
-
Mohammadpour, VM.
Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
-
Mohseni, F.
The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
-
Movaghar Garabagh, M. R.
X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]
N
-
Najafizadeh, A.
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
-
Najafkhani, A.
Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
-
Nategh, S.
The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
-
Nateq, M. H.
Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
-
Nourbakhsh, A. A.
The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
P
-
Panjepour, M.
The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
-
Peyghambardoust, N.
Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
R
-
Rezaeian, A.
The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
S
-
Sabzevari Zadeh, A.
A general model for production-transportation planning in steel supply chain [Volume 7, Issue 1, 2010, Pages 11-16]
-
Sahraeian, R.
A general model for production-transportation planning in steel supply chain [Volume 7, Issue 1, 2010, Pages 11-16]
-
Saidi, A.
The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
-
Shafyei, A.
The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
T
-
Taheri, A. M.
The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
-
Tavakoli Shoushtari, M. R.
Effect of ageing heat treatment on corrosion behaviorof 17-4 PH stainless steel in 3.5% NaCl [Volume 7, Issue 1, 2010, Pages 33-36]
V
-
Vahid dastjerdi, H.
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
W
-
Wang, T. S.
The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]
Y
-
Yazdani, S.
The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]
-
Yoozbashi, M. N.
The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]
Z
-
Zangeneh-Madar, K.
Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
Your query does not match with any item