Author Index

A

  • A., A. The Effect of Chloride Ions Concentration on the Electrochemical Behavior of AISI 410 Stainless Steels in Simulated Concrete Pore Solution [Volume 11, Issue 1, 2015, Pages 35-40]
  • Abbasi, E. Effect of NbMo Addition on the Precipitation Behaviour of V Microalloyed Steel during Intercritical Annealing [Volume 15, Issue 2, 2018, Pages 1-11]
  • Abbasi, M. H. The Effect of Flux type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur from Molten Iron [Volume 6, Issue 2, 2009, Pages 28-33]
  • Abbasi, M. H. The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
  • Abbasi, M. H. The Effect of CaF2 Content in Hot Metal Pretreatment Flux Based on Lime [Volume 8, Issue 2, 2011, Pages 5-8]
  • Abbasi, M. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
  • Abbasi, M. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
  • Abbasi, M. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Abbasi, S. M. Dynamic Recrystallization under Hot Deformation of a PH Stainless Steel [Volume 3, Issue 1, 2006, Pages 8-12]
  • Abbasi, S. M. Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
  • Abbasi, S. Influence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel [Volume 14, Issue 2, 2017, Pages 33-37]
  • Abbasi-Khazaei, B. Effect of tempering temperature on microstructure and work hardening behavior of a triple-phase AISI 4140 steel [Volume 18, Issue 2, 2022, Pages 23-29]
  • Abbaszadeh, H. Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
  • Abdeli, M. A Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel [Volume 2, Issue 2, 2005, Pages 19-23]
  • Abdeli, M. An investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel [Volume 6, Issue 1, 2009, Pages 19-24]
  • Abdeyazdan, H. The Effect of Flux type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur from Molten Iron [Volume 6, Issue 2, 2009, Pages 28-33]
  • Abdeyazdan, H. The Effect of CaF2 Content in Hot Metal Pretreatment Flux Based on Lime [Volume 8, Issue 2, 2011, Pages 5-8]
  • Abdi, S. The Effect of Welding Parameters on the Room and High Temperature Tribological Behavior of the Weld Overlaid Die [Volume 15, Issue 1, 2018, Pages 19-27]
  • Abdollah, S. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
  • Abdollahi, S. The Effect of Erosion on Corrosion Protection Properties of Coal Tar Epoxy Coating [Volume 11, Issue 2, 2014, Pages 17-22]
  • Abdollahi, Sajad Investigation of the Effect of the Efficiency of Catalysts on Early Destruction of Direct Reduction Reformer Tubes. [Volume 17, Issue 2, 2020, Pages 34-39]
  • Abdollahi, Sajad Investigation of Corrosion Behavior of Drain Pipes of Process Compressors in Direct Reduction Unit. [Volume 17, Issue 2, 2020, Pages 40-45]
  • Abdollah-Pour, H. The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel [Volume 16, Issue 2, 2019, Pages 29-33]
  • Abed, Z. The Effect of the Removal of Energy Subsidies in the Competitiveness of Iranian Steel Industries [Volume 10, Issue 2, 2013, Pages 36-41]
  • Abedi, A. Study on Static Recrystallization Process in Duplex Stainless Steel 2205 [Volume 8, Issue 2, 2011, Pages 20-23]
  • Abyazi, A. Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
  • Abyazi, A. The Effect of Inclusions on Through-thickness Directional Fatigue Behavior of S355N Steel Plate [Volume 11, Issue 1, 2015, Pages 1-6]
  • Abyazi, A. Estimation of Maximum Inclusion Size and Fatigue Limit in HSLA-100 Steel [Volume 16, Issue 2, 2019, Pages 16-21]
  • Adjabshiri, M. Analyzing the Failure of Master Mould in Casting of Copper Anode Moulds and Suggesting a more Suitable Metal Mould [Volume 3, Issue 1, 2006, Pages 33-42]
  • Afkhami Aqda, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Afshar, A. The Inhibition Effect of Polyethylenimine (PEI) on Pitting Corrosion of 304 Austenitic Stainless Steel in 3.5% NaCl Solution [Volume 10, Issue 1, 2013, Pages 14-22]
  • Afzali, A. An Investigation of Casting Defects Revealed in Forming Process of USD7 Steel [Volume 3, Issue 2, 2006, Pages 29-33]
  • Aghaei, A. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
  • Aghaei, Z. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels [Volume 11, Issue 2, 2014, Pages 1-5]
  • Aghili, Sayyed Majid The Effect of Header Geometry on Temperature Distribution in Cold Rolling [Volume 2, Issue 2, 2005, Pages 24-29]
  • Ahangarani, S. Influence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel [Volume 14, Issue 2, 2017, Pages 33-37]
  • Ahangaryan, Majid Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel [Volume 17, Issue 1, 2020, Pages 1-10]
  • Ahmadi, E. Welding of 304L Stainless Steel with Activated Tungsten Inert Gas Process (A-TIG) [Volume 10, Issue 1, 2013, Pages 27-33]
  • Ahmadi, S. Evaluation of Deoxidation Process in Medical Grade of 316L Stainless Steel [Volume 3, Issue 2, 2006, Pages 22-28]
  • Ajamein, Hossein Effect of zirconia addition on the properties of dolomite magnesia refractories used in steel industries [Volume 18, Issue 1, 2021, Pages 33-43]
  • Akbari, G. H. Recrystallization Behavior of Deep Drawing Low Carbon Steel Sheets Produced by Mobarakeh Steel Plant [Volume 2, Issue 2, 2005, Pages 36-42]
  • Akbarimusavi, S. A. Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process [Volume 14, Issue 2, 2017, Pages 16-26]
  • Akbarzadeh, E. Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process [Volume 14, Issue 2, 2017, Pages 27-32]
  • Akbarzadeh, M. Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
  • Akhbarizadeh, A. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Akramifard, H. R. Microstructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures [Volume 13, Issue 1, 2016, Pages 38-44]
  • Aliakbarzadeh, H. Investigation of Hardness and Impact Toughness of Zr-Microalloyed Cast Steel [Volume 2, Issue 1, 2005, Pages 26-30]
  • Alikhani, S. Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
  • Alishahi, M. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
  • Alizadeh, M. Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process [Volume 3, Issue 2, 2006, Pages 7-16]
  • Alizadeh, M. Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting [Volume 5, Issue 2, 2008, Pages 1-7]
  • Alizadeh, M. Characterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry [Volume 7, Issue 1, 2010, Pages 21-24]
  • Alizadeh, M. A simple Analytical model for solidification cooling rate based on the local heat flux density [Volume 7, Issue 2, 2010, Pages 34-44]
  • Alizadeh, M. Effect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel [Volume 9, Issue 2, 2012, Pages 27-31]
  • Alizadeh, M. The Effects of Hot Tear Segregations on the Rolled Product Quality of Continuously Cast Steel [Volume 10, Issue 2, 2013, Pages 11-17]
  • Alizadeh, M. The Influence of HH Type Steel Microstructure on the Distortion Behavior of Grate Bar Part in the Indurating Machine of Pelletizing Plant [Volume 13, Issue 2, 2016, Pages 7-12]
  • Alizadeh, M. Effect of Heat Treatment on Microstructure, Magnetic and Mechanical Properties of HSLA-100 [Volume 16, Issue 1, 2019, Pages 23-30]
  • Amadeh, A. Wear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating [Volume 6, Issue 2, 2009, Pages 14-19]
  • Amadeh, A. Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process [Volume 14, Issue 2, 2017, Pages 16-26]
  • Amin, M. H. Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process [Volume 3, Issue 2, 2006, Pages 34-42]
  • Amini, k. Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature [Volume 16, Issue 1, 2019, Pages 31-40]
  • Amini, K. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Amini, K. The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
  • Amini, K. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
  • Amini, K. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]
  • Amini, K. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Amini, K. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Amini, K. The Effect of Deep Cryogenic Treatment on Microstructure, Hardness and Wear Behavior of INDRA 5 Cold Work Tool Steel [Volume 15, Issue 2, 2018, Pages 38-44]
  • Amini, M. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Amini Mashhadi, H. An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
  • Amini Najafabadi, R. A Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments [Volume 11, Issue 1, 2015, Pages 18-23]
  • Amini Najafabadi, R. Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation [Volume 11, Issue 1, 2015, Pages 31-34]
  • Amini Najafabadi, R. Comparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics [Volume 14, Issue 2, 2017, Pages 38-42]
  • Amini Najafabadi, R. Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process [Volume 16, Issue 2, 2019, Pages 42-49]
  • Amirfattahi, R. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
  • Amirkaveei, A. Measurements of iron concentrate stockpile weight, from laser mapping to investigation of effective parameters on surface density [Volume 6, Issue 2, 2009, Pages 20-23]
  • Anvari, Ebrahim Investigating the impact of exchange rate and oil price fluctuations on Iran’s steel exports to China with sanctions in focus: A wavelet and multivariate-GARCH approach [Volume 18, Issue 1, 2021, Pages 98-105]
  • Araghchi, M. Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
  • Arefpour, A. R. Producing low fluorine mold powder by replacing CaF2 with Na2CO3, ZnO and Fe2O3 [Volume 8, Issue 1, 2011, Pages 12-18]
  • Arefpour, A. The Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization [Volume 13, Issue 1, 2016, Pages 20-26]
  • Arefpour, ahmadreza Reciprocal Relations in Glass-Making and Bond-Breaking Components in the Chemical Composition of Mould Powders [Volume 18, Issue 2, 2022, Pages 1-12]
  • Arefpour, A. R. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Arfaei, B. Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process [Volume 3, Issue 2, 2006, Pages 34-42]
  • Arman, Seyed Aziz Investigating the impact of exchange rate and oil price fluctuations on Iran’s steel exports to China with sanctions in focus: A wavelet and multivariate-GARCH approach [Volume 18, Issue 1, 2021, Pages 98-105]
  • Asadollahi, Ayoub Gas Tungsten Arc Welding of HP Heat Resistant Steel with 25Cr-35Ni and 35Cr-45Ni Filler Metals [Volume 18, Issue 2, 2022, Pages 30-37]
  • Ashrafizadeh, F. A Comparative Evaluation of Welding Consumables for Dissimilar Welds between 310 Austenitic Stainless Steel and Inconel 657 [Volume 4, Issue 1, 2007, Pages 39-49]
  • Ashrafizadeh, F. Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
  • Ashrafizadeh, F. Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various [Volume 5, Issue 2, 2008, Pages 29-35]
  • Ashrafizadeh, F. Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW) [Volume 6, Issue 2, 2009, Pages 34-37]
  • Ashrafizadeh, F. Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation [Volume 10, Issue 1, 2013, Pages 37-42]
  • Ashrafizadeh, F. A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]
  • Ashrafizadeh, F. Effects of Martensite Reversion Parameters on the Formation of Nano/ultrafine Grain Structure in AISI 304L Stainless Steel [Volume 14, Issue 1, 2017, Pages 23-29]
  • Ashtari, Pooria Wear behavior of laser cladded Ni based-WC-La2O3 hybrid composite coating on H13-Steel at elevated and ambient temperatures [Volume 18, Issue 1, 2021, Pages 83-97]
  • Assa, Farnaz Effect of zirconia addition on the properties of dolomite magnesia refractories used in steel industries [Volume 18, Issue 1, 2021, Pages 33-43]
  • Atapour, M. The Effect of Erosion on Corrosion Protection Properties of Coal Tar Epoxy Coating [Volume 11, Issue 2, 2014, Pages 17-22]
  • Atapour, M. A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]
  • Azadbeh, M. Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
  • Azadi, Mahboobeh Effects of Addition of Waste Toner Particles on Tribological Properties of Ni-P Coatings Before and After Heat Treatment [Volume 18, Issue 1, 2021, Pages 23-32]
  • Azadmehr, A. Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry [Volume 6, Issue 1, 2009, Pages 9-13]
  • Azargoman, Majid The effects of diffusion depth and heat-affected zone in NE-GMAW process on SUH 310S steel using an Image processing method [Volume 17, Issue 1, 2020, Pages 11-20]
  • Azargoman, Majid Modeling of weld bead geometry and optimization of GMAW welding parameters on CK45 steel [Volume 18, Issue 1, 2021, Pages 113-123]
  • Azari, K Hyperactivation of Bentonite in Pelletizing Process [Volume 1, Issue 1, 2004, Pages 38-41]
  • Azari Khosroshahi, R. Welding of 304L Stainless Steel with Activated Tungsten Inert Gas Process (A-TIG) [Volume 10, Issue 1, 2013, Pages 27-33]
  • Azhari, A. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]
  • Azimian, A. Simulation of a Box Annealing Unit [Volume 2, Issue 1, 2005, Pages 7-20]

B

  • Badr, K. Chemical energy and bottom stirring systems – Cost effective solutions for a better performing EAF [Volume 6, Issue 1, 2009, Pages 1-8]
  • Bagheri, M. The Effects of Hot Tear Segregations on the Rolled Product Quality of Continuously Cast Steel [Volume 10, Issue 2, 2013, Pages 11-17]
  • Bagheriyeh, Arash The effects of vanadium on microstructure and wear resistance of high manganese steels [Volume 17, Issue 2, 2020, Pages 46-55]
  • Bahrami, A. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]
  • Bahrami, Abbas Gas Tungsten Arc Welding of HP Heat Resistant Steel with 25Cr-35Ni and 35Cr-45Ni Filler Metals [Volume 18, Issue 2, 2022, Pages 30-37]
  • Bahrehbarpoor, M. High Temperature Behavior of Dual Phase Steels [Volume 2, Issue 2, 2005, Pages 30-35]
  • Bai, Bing-Zhe The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Baibordi, A. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
  • Bakhtiari, H. Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process [Volume 14, Issue 2, 2017, Pages 16-26]
  • Bakhtiari, H. Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel [Volume 15, Issue 1, 2018, Pages 9-18]
  • Bakhtiari, M. Effects of Ferrosilicon Addition and Formation of Insitu SiC Nano-whiskers on MgO-C Refractories [Volume 14, Issue 1, 2017, Pages 38-43]
  • Bakhtiari, R. Effect of tempering temperature on microstructure and work hardening behavior of a triple-phase AISI 4140 steel [Volume 18, Issue 2, 2022, Pages 23-29]
  • Balali, Mostafa Investigation of simple shear extrusion steel mold and mechanical properties of nanostructured extruded samples of Al6061 [Volume 18, Issue 1, 2021, Pages 106-112]
  • Barati, M Hyperactivation of Bentonite in Pelletizing Process [Volume 1, Issue 1, 2004, Pages 38-41]
  • Barlat, F. Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation [Volume 10, Issue 1, 2013, Pages 37-42]
  • Bataille, A. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
  • Behjati, P. Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
  • Beynaghi, Mohsen Investigation of simple shear extrusion steel mold and mechanical properties of nanostructured extruded samples of Al6061 [Volume 18, Issue 1, 2021, Pages 106-112]
  • Bhadeshia, H. K. D. H. High-Strength Bainitic Steels [Volume 1, Issue 1, 2004, Pages 15-23]
  • Biglar, S. Effects of Cr2O3 on physical and mechanical properties of in-situ spinel containing castable [Volume 8, Issue 1, 2011, Pages 39-42]
  • Bijari, M. Steel Consumption Forecasting Using Nonlinear Pattern Recognition Model Based on Self-Organizing Maps [Volume 14, Issue 1, 2017, Pages 30-37]
  • Bina, M. H. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]

C

  • Caballero, F. G. High-Strength Bainitic Steels [Volume 1, Issue 1, 2004, Pages 15-23]
  • Cappel, J. Chemical energy and bottom stirring systems – Cost effective solutions for a better performing EAF [Volume 6, Issue 1, 2009, Pages 1-8]

D

  • Dabir, Mohammad Parham Effect of Tempering Treatment on Microstructure and Mechanical properties of the HSLA-100 steel [Volume 18, Issue 1, 2021, Pages 1-10]
  • Dallali Isfahani, T. A Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments [Volume 11, Issue 1, 2015, Pages 18-23]
  • Dallali Isfahani, T. A Study on the Mechanical Properties of Dual Phase Steels Prepared by the Direct and Step Quenching Procedure [Volume 11, Issue 2, 2014, Pages 28-33]
  • Dallali Isfahani, T. Dry Wear Behavior of 42CrMo4 Steel/ZrO2 Composite Prepared by Pressure-Less Infiltration Method [Volume 13, Issue 1, 2016, Pages 8-14]
  • Dallali Isfahani, T. Comparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics [Volume 14, Issue 2, 2017, Pages 38-42]
  • Dana, M. M A Corrosion Study of Grain-Refined 304L Stainless Steels Produced by the Martensitic Process [Volume 12, Issue 2, 2015, Pages 30-38]
  • Danaee, Iman Corrosion Resistance and Semiconducting Properties of the Passive Films on Duplex Stainless Steel 2205 [Volume 14, Issue 2, 2017, Pages 9-15]
  • Darivandpour, Mahyar Investigating the heat input effect of the GTAW process upon the microstructure and HAZ extension of HSLA-100 steel weld joints using thermal cycles [Volume 17, Issue 1, 2020, Pages 57-69]
  • Dehghan, A. Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45 [Volume 9, Issue 2, 2012, Pages 1-4]
  • Dehkordi, E. H. The Effect of Time on the Formation & Growth of Passive Layer on Carbon Steel A516 Gr. 70 in Sour Water [Volume 4, Issue 1, 2007, Pages 28-33]
  • Dehmolaei, R. Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
  • Dehmolaei, Reza Investigating the heat input effect of the GTAW process upon the microstructure and HAZ extension of HSLA-100 steel weld joints using thermal cycles [Volume 17, Issue 1, 2020, Pages 57-69]
  • Dehnavi, M. R. Development of Ultrafine Bainitic Structure in AISI 431 Stainless Steel [Volume 16, Issue 1, 2019, Pages 14-22]
  • Dini, G. Effect of Ti-microalloy Addition on the Formability and Mechanical Properties of a Low Carbon (ST14) Steel [Volume 3, Issue 2, 2006, Pages 1-6]
  • Dini, G. The Effect of Deformation Temperature on the Mechanical Properties and Microstructural Evolutions of High Manganese TWIP Steel [Volume 10, Issue 2, 2013, Pages 7-10]
  • Dini, G. Improving the Microstructure, Mechanical and Magnetic Properties of AISI 4340 Steel Using the Heat Treatment Process [Volume 10, Issue 2, 2013, Pages 18-22]
  • Dini, G. Detailed Microstructural Evolutions of TWIP Steel During Tensile Straining: In situ SEM Observations [Volume 11, Issue 2, 2014, Pages 34-36]
  • Dini, G. Observation of Stacking Fault Tetrahedral in TWIP Steel [Volume 12, Issue 2, 2015, Pages 46-49]

E

  • Ebrahimi, A. R. Anisotropy in Microalloyed S355N Steel [Volume 5, Issue 2, 2008, Pages 14-20]
  • Ebrahimi, A. R. Welding of 304L Stainless Steel with Activated Tungsten Inert Gas Process (A-TIG) [Volume 10, Issue 1, 2013, Pages 27-33]
  • Ebrahimi, A. R. The Effect of Inclusions on Through-thickness Directional Fatigue Behavior of S355N Steel Plate [Volume 11, Issue 1, 2015, Pages 1-6]
  • Ebrahimi, A. Estimation of Maximum Inclusion Size and Fatigue Limit in HSLA-100 Steel [Volume 16, Issue 2, 2019, Pages 16-21]
  • Ebrahimi, Gh. Study on Static Recrystallization Process in Duplex Stainless Steel 2205 [Volume 8, Issue 2, 2011, Pages 20-23]
  • Ebrahimi, M. Corrosion Resistance and Semiconducting Properties of the Passive Films on Duplex Stainless Steel 2205 [Volume 14, Issue 2, 2017, Pages 9-15]
  • Ebrahimi, R Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map [Volume 1, Issue 1, 2004, Pages 1-7]
  • Ebrahimi, R. Characteristic Points of Stress-Strain Curve at High Temperature [Volume 4, Issue 1, 2007, Pages 24-27]
  • Ebrahimi, R. Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
  • Ebrahimi, S. The Fracture Mechanisms of an Austenitic Heat Resisting Steel in Copper Converter Atmosphere [Volume 2, Issue 1, 2005, Pages 31-36]
  • Ebrahimifar, H. Oxidation behavior and electrical Characteristics of used interconnects in solid oxide fuel cells at presence of Mn3O4 and MnFe2O4 coatings [Volume 6, Issue 2, 2009, Pages 24-27]
  • Ebrahimifar, H. High Temperature Oxidation Behavior of Aluminide Coating Fabricated on UNS S30815 Stainless Steel [Volume 16, Issue 1, 2019, Pages 41-50]
  • Ebrahimifar, H. Oxidation Behavior of AISI 430 Ferritic Stainless Steel Coated with Ni-Co-TiO2 [Volume 16, Issue 2, 2019, Pages 34-41]
  • Ebrahimifar, Hadi Oxidation Behavior of AISI 316 Steel Coated with Ni-P-TiO2-Al2O3 Composite Coating [Volume 17, Issue 1, 2020, Pages 28-39]
  • Ebrahimpour, A. Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel [Volume 13, Issue 2, 2016, Pages 1-6]
  • Ebrahimpour, A. The Effect of Two-stage Heat Treatment Temperatures on Initial and FSSWed Properties of TRIP Steels [Volume 14, Issue 1, 2017, Pages 1-9]
  • Ebrahimzade, I. An Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment [Volume 15, Issue 2, 2018, Pages 18-26]
  • Ebrahimzadeh, I. The Effect of Welding Parameters on the Room and High Temperature Tribological Behavior of the Weld Overlaid Die [Volume 15, Issue 1, 2018, Pages 19-27]
  • Ebrahimzadeh, I. Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature [Volume 16, Issue 1, 2019, Pages 31-40]
  • Ebrahimzadeh, I. Enhancement Wear Properties of HSS-M2 Tool Steel with WC Deposited by SMAW Process [Volume 16, Issue 2, 2019, Pages 1-8]
  • Ebrahimzadeh, R. An Analytical model of the organizational culture evaluation in Iran steel industry: a survey research of Tuka Steel Investment Holding Company [Volume 7, Issue 1, 2010, Pages 1-10]
  • Edalati, Kh. The Layered Reduction of Hematite (Iron Oxide) Ore by Non-Coking Coal: The Effect of Calcium Carbonate on Reduction [Volume 10, Issue 2, 2013, Pages 23-29]
  • Edmonds, D. V. Carbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al [Volume 2, Issue 2, 2005, Pages 1-8]
  • Edmonds, D. V. The Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering [Volume 1, Issue 1, 2004, Pages 8-14]
  • Edris, H. Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process [Volume 3, Issue 2, 2006, Pages 7-16]
  • Edris, H. The Effect of Flux type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur from Molten Iron [Volume 6, Issue 2, 2009, Pages 28-33]
  • Edris, H. The Effect of CaF2 Content in Hot Metal Pretreatment Flux Based on Lime [Volume 8, Issue 2, 2011, Pages 5-8]
  • Edris, H. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]
  • Edris, H. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Ehseni, N. Dynamic Recrystallization under Hot Deformation of a PH Stainless Steel [Volume 3, Issue 1, 2006, Pages 8-12]
  • Ekrami, A. High Temperature Behavior of Dual Phase Steels [Volume 2, Issue 2, 2005, Pages 30-35]
  • Elboujdaini, M. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Emadi, H. The Role of Nano Sic Whiskers on the Strength and Density of Aluminum Silicate-SiC-C Compounds as a Reinforced Steel Refractory [Volume 14, Issue 2, 2017, Pages 43-48]
  • Emadi, M. Surface Quality in Dry Machining of 55Cr3 Steel Bars [Volume 15, Issue 1, 2018, Pages 33-39]
  • Emadi, R. Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
  • Emadi, R. Effects of Ferrosilicon Addition and Formation of Insitu SiC Nano-whiskers on MgO-C Refractories [Volume 14, Issue 1, 2017, Pages 38-43]
  • Emadi, R. The Role of Nano Sic Whiskers on the Strength and Density of Aluminum Silicate-SiC-C Compounds as a Reinforced Steel Refractory [Volume 14, Issue 2, 2017, Pages 43-48]
  • Enayati, M. H. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels [Volume 11, Issue 2, 2014, Pages 1-5]
  • Enayati, M. H Production of Fe-C Powders with Improved Structure [Volume 1, Issue 1, 2004, Pages 24-28]
  • Erfani, L. Calculation of MnO Activity in Aluminate Slags at Various Temperatures [Volume 8, Issue 2, 2011, Pages 24-26]
  • Esfandiary, Hojjat Effects of Martensite Reversion Parameters on the Formation of Nano/ultrafine Grain Structure in AISI 304L Stainless Steel [Volume 14, Issue 1, 2017, Pages 23-29]
  • Eshraghi-Kakhki, M. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Eskandari, H. Corrosion Resistance and Semiconducting Properties of the Passive Films on Duplex Stainless Steel 2205 [Volume 14, Issue 2, 2017, Pages 9-15]
  • Eskandari, M. Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
  • Eskandari, M. Effect of Deformation Temperature on the Mechanical Behavior of a New TRIP/TWIP Steel Containing 21% Manganese [Volume 8, Issue 2, 2011, Pages 16-19]
  • Esmailian, M. Influence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel [Volume 14, Issue 2, 2017, Pages 33-37]
  • Estiri, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Etemad, Arash Effect of zirconia addition on the properties of dolomite magnesia refractories used in steel industries [Volume 18, Issue 1, 2021, Pages 33-43]
  • Etemad, Arash Evaluation of world and Iranian sponge iron production in 2020 [Volume 18, Issue 2, 2022, Pages 13-22]
  • Etminanfar, Mohamadreza A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Ezadi, J. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]

F

  • Fadavi, M. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Faghih, M. The Effect of Carbon Nanoparticles and Calcined Alumina on Mechanical Properties and Corrosion Resistance Behavior of the Magnesia Carbon Refractories [Volume 11, Issue 2, 2014, Pages 23-27]
  • Fang, B. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Fang, Hong-Sheng The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Farahani, H. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
  • Farazi, M. Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel [Volume 15, Issue 2, 2018, Pages 45-53]
  • Farazmand, Hassan Investigating the impact of exchange rate and oil price fluctuations on Iran’s steel exports to China with sanctions in focus: A wavelet and multivariate-GARCH approach [Volume 18, Issue 1, 2021, Pages 98-105]
  • Farzaneh, Mohamad Ali Kinetics Analysis of X65 Steel corrosion reactions at the simultaneous presence of CO2 and H2S [Volume 17, Issue 1, 2020, Pages 40-56]
  • Fathi, M. H. The Effect of Surface Treatment on Corrosion behavior of Surgical 316L Stainless Steel Implant [Volume 4, Issue 1, 2007, Pages 34-38]
  • Fattah-alhosseini, A. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
  • Fattah-alhosseini, A. The Electrochemical Behavior of AISI 321 Stainless Steel in Alkaline Media [Volume 10, Issue 1, 2013, Pages 7-13]
  • Fattah-alhosseini, A. Electrochemical Characterization of a Martensitic Stainless Steel [Volume 10, Issue 2, 2013, Pages 1-6]
  • Fattah-alhosseini, A. Corrosion Inhibition of API 5L Carbon Steel by Nettle Leaves Hydroalcoholic Extract in a 0.5 M H2SO4 Solution [Volume 13, Issue 1, 2016, Pages 45-49]
  • Foadian, Elham Optimization of Blast Furnace through Reducing Coke Consumption and CO2 Emission using HSC Software [Volume 18, Issue 1, 2021, Pages 74-82]
  • Forouzan, F. Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermo-mechanical parameters [Volume 6, Issue 2, 2009, Pages 6-13]

G

  • Ganji, O. The Effects of Volatile Materials of Non-coking Coal on the Reduction of Hematite [Volume 10, Issue 1, 2013, Pages 23-26]
  • Ganjkhanloo, Y. Calculation of MnO Activity in Aluminate Slags at Various Temperatures [Volume 8, Issue 2, 2011, Pages 24-26]
  • Ghaderi, Fateme The Effect of Heat Treatment and Cold-Work on Precipitation and Recrystallization of BioDur108 HNS Steel [Volume 18, Issue 1, 2021, Pages 64-73]
  • Ghafari, M. M. Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel [Volume 15, Issue 1, 2018, Pages 9-18]
  • Ghanbari, F. Mathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet [Volume 15, Issue 1, 2018, Pages 49-53]
  • Gharavi, F. Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature [Volume 16, Issue 1, 2019, Pages 31-40]
  • Ghasemi, A. Effect of Heat Treatment on Microstructure, Magnetic and Mechanical Properties of HSLA-100 [Volume 16, Issue 1, 2019, Pages 23-30]
  • Ghasemi, R. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]
  • Ghasemi, S. S. The structure-property relationship in a desulfurised and degassing hot work W500 tool steel [Volume 8, Issue 1, 2011, Pages 19-25]
  • Ghasemi, S. Kinetics of Ceramic Phase Crystallization in a Glass Derived from Wastes of Iron and Steel Industry [Volume 16, Issue 2, 2019, Pages 21-28]
  • Ghasemi, Samad Production and Crystallization Behavior of an Iron Rich Glass–Ceramic Prepared by Ironmaking and Steelmaking Wastes [Volume 14, Issue 1, 2017, Pages 17-22]
  • Ghasemi Banadkouki, Seyed Sadegh Investigation of carbon and silicon partitioning on ferrite hardening in a medium silicon low alloy ferrite-martensite dual-phase steel [Volume 17, Issue 2, 2020, Pages 25-33]
  • Ghatei Kalashami, A. The Effect of Intercritical Annealing Time on the Microstructures and Mechanical Properties of an Ultrafine Grained Dual Phase Steel Containing Niobium [Volume 11, Issue 1, 2015, Pages 7-11]
  • Ghayour, H. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Gheisari, H. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Ghobeiti-Hasab, Mehdi Effect of tempering temperature on microstructure and work hardening behavior of a triple-phase AISI 4140 steel [Volume 18, Issue 2, 2022, Pages 23-29]
  • Gholizadeh, A. An Analytical model of the organizational culture evaluation in Iran steel industry: a survey research of Tuka Steel Investment Holding Company [Volume 7, Issue 1, 2010, Pages 1-10]
  • Gholizadeh, M. Developing and Validating the Excellence Model for the Strategic Knowledge Management Case Study: Mobarakeh Steel Company [Volume 14, Issue 1, 2017, Pages 44-49]
  • Ghorabaei, A. S. Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel [Volume 16, Issue 1, 2019, Pages 1-8]
  • Ghorbani, Z. Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature [Volume 16, Issue 1, 2019, Pages 31-40]
  • Golestani-Fard, F. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]
  • Golozar, M. A. Evaluation of Heat Treatments and Their Effects on the Corrosion Behavior of TiAlON Coatings Prepared by Cathodic Arc Evaporation on D3 Tool Steel [Volume 10, Issue 1, 2013, Pages 1-6]
  • Golzar Shahri, M. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]

H

  • Habibi Parsa, M. Microstructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures [Volume 13, Issue 1, 2016, Pages 38-44]
  • Hadavi, S. M. M. Evaluation of Deoxidation Process in Medical Grade of 316L Stainless Steel [Volume 3, Issue 2, 2006, Pages 22-28]
  • Hadjari, A. Physical Modeling of Steel Delivery during Thin Slab Continuous Casting [Volume 5, Issue 1, 2008, Pages 41-46]
  • Haghighat Khah, Saeid Effects of Addition of Waste Toner Particles on Tribological Properties of Ni-P Coatings Before and After Heat Treatment [Volume 18, Issue 1, 2021, Pages 23-32]
  • Haghighi, M. R. Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel [Volume 15, Issue 2, 2018, Pages 45-53]
  • Haghir, T. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Haghshenas, D. F. Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters [Volume 3, Issue 2, 2006, Pages 17-21]
  • Hajiannia, I. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
  • Hajiannia, I. Evaluation of the Melted Zone Microstructure in the Interface of the Dissimilar Weld between A335 Low Alloy Steel and ER309L Filler Metal by Gas Tungsten Arc Welding [Volume 11, Issue 2, 2014, Pages 6-10]
  • Hajiloo, T. Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process [Volume 14, Issue 2, 2017, Pages 27-32]
  • Hajipour, A. Three-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components [Volume 4, Issue 1, 2007, Pages 8-15]
  • Hamidizadeh, M.R. Developing and Validating the Excellence Model for the Strategic Knowledge Management Case Study: Mobarakeh Steel Company [Volume 14, Issue 1, 2017, Pages 44-49]
  • Hamrahi, B. Corrosion Inhibition of API 5L Carbon Steel by Nettle Leaves Hydroalcoholic Extract in a 0.5 M H2SO4 Solution [Volume 13, Issue 1, 2016, Pages 45-49]
  • Han, E-H. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Harsij sani, M. Wear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating [Volume 6, Issue 2, 2009, Pages 14-19]
  • Hedayati, A. Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermo-mechanical parameters [Volume 6, Issue 2, 2009, Pages 6-13]
  • Hemmati, Mohammad Hosain Evaluation of Reduction of Electric Arc Furnace (EAF) Dust Using Volatile Matter of Non-Coking Coal [Volume 18, Issue 1, 2021, Pages 44-55]
  • Heshmat Dehkordi, E. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Heydarian, M. The Effect of Controlled Thermo Mechanical Processing on the Properties of a High Strength Steel [Volume 10, Issue 2, 2013, Pages 30-35]
  • Hojati Fahim, M. The Effect of Chloride Ions Concentration on the Electrochemical Behavior of AISI 410 Stainless Steels in Simulated Concrete Pore Solution [Volume 11, Issue 1, 2015, Pages 35-40]
  • Homayoun, A. M. An Investigation of Casting Defects Revealed in Forming Process of USD7 Steel [Volume 3, Issue 2, 2006, Pages 29-33]
  • Hosseini, A. Characterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry [Volume 7, Issue 1, 2010, Pages 21-24]
  • Hosseini, S. R. Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various [Volume 5, Issue 2, 2008, Pages 29-35]
  • Hosseini, S. R. Effect of Heat Treatment on Microstructure, Magnetic and Mechanical Properties of HSLA-100 [Volume 16, Issue 1, 2019, Pages 23-30]
  • Hosseini, S. R. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]
  • Hosseini, S. R. Effects of Martensite Reversion Parameters on the Formation of Nano/ultrafine Grain Structure in AISI 304L Stainless Steel [Volume 14, Issue 1, 2017, Pages 23-29]
  • Hosseini, S.R. Preparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel [Volume 13, Issue 2, 2016, Pages 31-39]
  • Hosseini Nasab, F. X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]
  • Hossein Nedjad, S. X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]

I

  • Imaninezhad, M. Strain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel [Volume 13, Issue 2, 2016, Pages 26-30]
  • Imantalab, O. The Effect of Solution Concentration on the Electrochemical Behaviour of AISI 321 Stainless Steel in Sulfuric Solutions [Volume 9, Issue 2, 2012, Pages 19-26]
  • Imantalab, O. The Electrochemical Behavior of AISI 321 Stainless Steel in Alkaline Media [Volume 10, Issue 1, 2013, Pages 7-13]
  • Irani, M. A Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments [Volume 11, Issue 1, 2015, Pages 18-23]
  • Isfahani, T. Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process [Volume 16, Issue 2, 2019, Pages 42-49]
  • Izadi, J. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]

J

  • Jabbarzare, Saeid Reciprocal Relations in Glass-Making and Bond-Breaking Components in the Chemical Composition of Mould Powders [Volume 18, Issue 2, 2022, Pages 1-12]
  • Jafari, M. Dynamic Recrystallization by Necklace Mechanism During Hot Deformation of 316 Stainless Steel [Volume 4, Issue 1, 2007, Pages 16-23]
  • Jafari Fesharaki, P. Choice of Dust Collectors Based on Energy and Environmental Degradation in Steel Industries [Volume 12, Issue 1, 2015, Pages 33-36]
  • Jafari Fesharaki, P. The Most Cost Effective Gas Cleaning Device in Steel Industry with Industrial Ecology Approach [Volume 15, Issue 1, 2018, Pages 40-48]
  • Jafari Nedoushan, R. The Effects of Inhomogeneous Mechanical Properties of the Ferrite Phase on Dual Phase Steel’s Behavior [Volume 13, Issue 1, 2016, Pages 27-37]
  • Jafarzadegan, Mostafa Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel [Volume 17, Issue 1, 2020, Pages 1-10]
  • Jamei, F Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel [Volume 15, Issue 1, 2018, Pages 28-32]
  • Javadpour, S. Investigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel [Volume 12, Issue 2, 2015, Pages 24-29]
  • Jenabali Jahromi, S. A. Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting [Volume 5, Issue 2, 2008, Pages 1-7]
  • Jenabali Jahromi, S. A. Effect of Heat Treatment Process on the Fatigue Behavior of AISI 1060 Steel [Volume 12, Issue 1, 2015, Pages 28-32]
  • Jenabali-Jahromi, S. A simple Analytical model for solidification cooling rate based on the local heat flux density [Volume 7, Issue 2, 2010, Pages 34-44]
  • Jonas, J. J. The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel [Volume 3, Issue 1, 2006, Pages 1-7]
  • Joudaki, J. Surface Quality in Dry Machining of 55Cr3 Steel Bars [Volume 15, Issue 1, 2018, Pages 33-39]
  • Joudaki, J. Experimental Investigation of Resistance Spot Welding of Ultrathin IF Steel Sheets [Volume 16, Issue 1, 2019, Pages 51-57]
  • Joulazadeh, M. H. Using Scrap Tires in EAFs as a Substitute for Carbon [Volume 5, Issue 1, 2008, Pages 36-40]
  • Joulazadeh, Mohammad Hassan Evaluation of world and Iranian sponge iron production in 2020 [Volume 18, Issue 2, 2022, Pages 13-22]

K

  • Kadkhodaei, V. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Kahrobaee, S. Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
  • Kalantar, M. The structure-property relationship in a desulfurised and degassing hot work W500 tool steel [Volume 8, Issue 1, 2011, Pages 19-25]
  • Kalantari, A. Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
  • Kamalabadi khorasani, J. The Effect of Binder Type on the Properties of Briquette and Pellet Produced from the Magnetite Concentrate of Gol-E-Gohar Iron-Ore [Volume 10, Issue 1, 2013, Pages 34-36]
  • Karamian, E. Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
  • Karamian, E. Comparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing [Volume 9, Issue 1, 2012, Pages 26-29]
  • Karamian, E. The Effect of Carbon Nanoparticles and Calcined Alumina on Mechanical Properties and Corrosion Resistance Behavior of the Magnesia Carbon Refractories [Volume 11, Issue 2, 2014, Pages 23-27]
  • Karamian, E. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Karamian, E. The Role of Nano Sic Whiskers on the Strength and Density of Aluminum Silicate-SiC-C Compounds as a Reinforced Steel Refractory [Volume 14, Issue 2, 2017, Pages 43-48]
  • Karaminezhaad, M. The Fracture Mechanisms of an Austenitic Heat Resisting Steel in Copper Converter Atmosphere [Volume 2, Issue 1, 2005, Pages 31-36]
  • Karimi, M. Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
  • Karimzadeh, F. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels [Volume 11, Issue 2, 2014, Pages 1-5]
  • Karkehabadi, M. M. Prediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling [Volume 15, Issue 2, 2018, Pages 27-37]
  • Karkeh Abadi, M. M. Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel [Volume 8, Issue 1, 2011, Pages 1-4]
  • Kashefi, M. Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
  • Kashefi, M. Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
  • Kasiri, M. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
  • Kasiri, M. Evaluation of the Melted Zone Microstructure in the Interface of the Dissimilar Weld between A335 Low Alloy Steel and ER309L Filler Metal by Gas Tungsten Arc Welding [Volume 11, Issue 2, 2014, Pages 6-10]
  • Kaviani, Saeed The effects of vanadium on microstructure and wear resistance of high manganese steels [Volume 17, Issue 2, 2020, Pages 46-55]
  • Kazazi, M. The Inhibition Effect of Polyethylenimine (PEI) on Pitting Corrosion of 304 Austenitic Stainless Steel in 3.5% NaCl Solution [Volume 10, Issue 1, 2013, Pages 14-22]
  • Kazemi, A. R. Simulation of a Box Annealing Unit [Volume 2, Issue 1, 2005, Pages 7-20]
  • Kazeminezhad, M. Investigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies [Volume 6, Issue 2, 2009, Pages 1-5]
  • Kazemzadeh, A. Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process [Volume 3, Issue 2, 2006, Pages 34-42]
  • Kermanpour, A. Effects of Martensite Reversion Parameters on the Formation of Nano/ultrafine Grain Structure in AISI 304L Stainless Steel [Volume 14, Issue 1, 2017, Pages 23-29]
  • Kermanpur, A. Three-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components [Volume 4, Issue 1, 2007, Pages 8-15]
  • Kermanpur, A. Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
  • Kermanpur, A. Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
  • Kermanpur, A. Color metallography; a suitable method for characterization of martensite and bainite in multiphase steels [Volume 6, Issue 1, 2009, Pages 14-18]
  • Kermanpur, A. Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermo-mechanical parameters [Volume 6, Issue 2, 2009, Pages 6-13]
  • Kermanpur, A. Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel [Volume 8, Issue 1, 2011, Pages 1-4]
  • Kermanpur, A. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
  • Kermanpur, A. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
  • Kermanpur, A. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Kermanpur, A. The Effect of Intercritical Annealing Time on the Microstructures and Mechanical Properties of an Ultrafine Grained Dual Phase Steel Containing Niobium [Volume 11, Issue 1, 2015, Pages 7-11]
  • Kermanpur, A. Prediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling [Volume 15, Issue 2, 2018, Pages 27-37]
  • Kermanpur, Ahmad Effect of Tempering Treatment on Microstructure and Mechanical properties of the HSLA-100 steel [Volume 18, Issue 1, 2021, Pages 1-10]
  • Keshavarz Alamdari, E. Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters [Volume 3, Issue 2, 2006, Pages 17-21]
  • Keshavarz Alamdari, E. Calculation of MnO Activity in Aluminate Slags at Various Temperatures [Volume 8, Issue 2, 2011, Pages 24-26]
  • Khajesarvi, Ali Investigation of carbon and silicon partitioning on ferrite hardening in a medium silicon low alloy ferrite-martensite dual-phase steel [Volume 17, Issue 2, 2020, Pages 25-33]
  • Khalil-Allafi, Jafar A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Khanmohammadi, Sahel A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Khanzadeh, M. R. Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process [Volume 14, Issue 2, 2017, Pages 16-26]
  • Khanzadeh Gharah Shiran, M. Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel [Volume 15, Issue 1, 2018, Pages 9-18]
  • Khashei, M. Steel Consumption Forecasting Using Nonlinear Pattern Recognition Model Based on Self-Organizing Maps [Volume 14, Issue 1, 2017, Pages 30-37]
  • Khayamian, T. Producing low fluorine mold powder by replacing CaF2 with Na2CO3, ZnO and Fe2O3 [Volume 8, Issue 1, 2011, Pages 12-18]
  • Kheirandish, Shahram The Effect of Heat Treatment and Cold-Work on Precipitation and Recrystallization of BioDur108 HNS Steel [Volume 18, Issue 1, 2021, Pages 64-73]
  • Kheirollahi-Hosseinabadi, I. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]
  • Khodabakhshi, F. Investigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies [Volume 6, Issue 2, 2009, Pages 1-5]
  • Khosravi, Mohammad Investigation of simple shear extrusion steel mold and mechanical properties of nanostructured extruded samples of Al6061 [Volume 18, Issue 1, 2021, Pages 106-112]
  • Khosravi, Mohammad Modeling of weld bead geometry and optimization of GMAW welding parameters on CK45 steel [Volume 18, Issue 1, 2021, Pages 113-123]
  • Khosravifard, A. Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
  • Khosravipour, M. A. Electroless Deposition of Ni-Cu-P Alloy on 304 Stainless Steel by Using Thiourea and Gelatin as Additives and Investigation of Some Properties of Deposits [Volume 1, Issue 1, 2004, Pages 29-34]
  • Khosroshahi, R. A. A Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel [Volume 2, Issue 2, 2005, Pages 19-23]
  • Kiani, K. Prediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling [Volume 15, Issue 2, 2018, Pages 27-37]
  • Kiani-Rashid, A. R. Carbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al [Volume 2, Issue 2, 2005, Pages 1-8]
  • Kiani-Rashid, A. R. The effect of quenching media and annealing temperature on graphitization transformation kinetic of CK100 tool steel [Volume 8, Issue 1, 2011, Pages 34-38]
  • Kiani-Rashid, A.R The Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering [Volume 1, Issue 1, 2004, Pages 8-14]
  • Kirschen, M. Chemical energy and bottom stirring systems – Cost effective solutions for a better performing EAF [Volume 6, Issue 1, 2009, Pages 1-8]
  • Kokabi, A. H. Investigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies [Volume 6, Issue 2, 2009, Pages 1-5]
  • Kordzadeh, E. The Fracture Mechanisms of an Austenitic Heat Resisting Steel in Copper Converter Atmosphere [Volume 2, Issue 1, 2005, Pages 31-36]
  • Kumar, A. Mathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet [Volume 15, Issue 1, 2018, Pages 49-53]

L

  • Lakhi, M. Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel [Volume 15, Issue 2, 2018, Pages 45-53]
  • Li, J. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Li, Qi The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Liaghat, G. Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base Metal Using Explosion Cladding process [Volume 14, Issue 2, 2017, Pages 16-26]
  • Liu, Dong-Yu The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Loghman, M. R. Development of Ultrafine Bainitic Structure in AISI 431 Stainless Steel [Volume 16, Issue 1, 2019, Pages 14-22]
  • Lotfian, Najmeh Relationship between steel shell temperature and nano MgCr2O4 addition on steel snorkel life time in Ruhrstahl-Heraeus vacuum steel refining units [Volume 18, Issue 1, 2021, Pages 11-22]

M

  • MacKenzie, Kenneth J.D. Relationship between steel shell temperature and nano MgCr2O4 addition on steel snorkel life time in Ruhrstahl-Heraeus vacuum steel refining units [Volume 18, Issue 1, 2021, Pages 11-22]
  • Madadi, F. Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW) [Volume 6, Issue 2, 2009, Pages 34-37]
  • Madadian, A. H. Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B [Volume 13, Issue 1, 2016, Pages 1-7]
  • Mahdavi, R. Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
  • Mahdavian, A. Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters [Volume 3, Issue 2, 2006, Pages 17-21]
  • Mahmoodi, Masoud The effects of diffusion depth and heat-affected zone in NE-GMAW process on SUH 310S steel using an Image processing method [Volume 17, Issue 1, 2020, Pages 11-20]
  • Mahmoodi, Masoud Using the artificial neural network to investigate the effect of parameters in square cup deep drawing of aluminum-steel laminated sheets [Volume 17, Issue 2, 2020, Pages 1-13]
  • Mahmoodzadeh, Z. The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel [Volume 16, Issue 2, 2019, Pages 29-33]
  • Mahmoud Abadi, Hadi Investigation of the Effect of the Efficiency of Catalysts on Early Destruction of Direct Reduction Reformer Tubes. [Volume 17, Issue 2, 2020, Pages 34-39]
  • Mahmoudi, Sh. Three-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components [Volume 4, Issue 1, 2007, Pages 8-15]
  • Maleki, A. Detailed Microstructural Evolutions of TWIP Steel During Tensile Straining: In situ SEM Observations [Volume 11, Issue 2, 2014, Pages 34-36]
  • Maleki, M. Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel [Volume 15, Issue 1, 2018, Pages 28-32]
  • Malekian, V. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
  • Mansouri, B. A Statistical Analysis of the Mechanical Properties of the Beam 14 in Lines 630 and 650 of Iran National Steel Industrial Group [Volume 13, Issue 2, 2016, Pages 40-45]
  • Mansouri, N. Simulation of Temperature Distribution in Hot Strip over Transfer Table [Volume 3, Issue 1, 2006, Pages 26-32]
  • Maraki, Mohamaad Reza Using the artificial neural network to investigate the effect of parameters in square cup deep drawing of aluminum-steel laminated sheets [Volume 17, Issue 2, 2020, Pages 1-13]
  • Maraki, Mohammad Reza The effects of diffusion depth and heat-affected zone in NE-GMAW process on SUH 310S steel using an Image processing method [Volume 17, Issue 1, 2020, Pages 11-20]
  • Mardani, Salman Simulation of water-circulating path and heat transfer in blast-furnace tuyeres with simple and spiral double-chamfer design [Volume 17, Issue 1, 2020, Pages 21-27]
  • Masumi, Saeedeh A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Mazaheri, Y. Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel [Volume 8, Issue 1, 2011, Pages 1-4]
  • Mazaheri, Y. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
  • Mazaheri, Y. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Mazaheri, Y. The Effect of Intercritical Annealing Time on the Microstructures and Mechanical Properties of an Ultrafine Grained Dual Phase Steel Containing Niobium [Volume 11, Issue 1, 2015, Pages 7-11]
  • Mazaheri, Y. Resistance Spot Welding of Steels: Modeling and Simulation [Volume 14, Issue 1, 2017, Pages 10-16]
  • Mazahery, R. An Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment [Volume 15, Issue 2, 2018, Pages 18-26]
  • Meghdadi, A. H. Significance of Heat Conduction Parameter along the Rolling Direction in the Thermal Modeling of the Hot Rolling Process [Volume 4, Issue 1, 2007, Pages 1-7]
  • Mehdikhani, M. The Effect of Surface Treatment on Corrosion behavior of Surgical 316L Stainless Steel Implant [Volume 4, Issue 1, 2007, Pages 34-38]
  • Mehdinia, M. Effect of Heat Treatment Process on the Fatigue Behavior of AISI 1060 Steel [Volume 12, Issue 1, 2015, Pages 28-32]
  • Mehrabi, K. The Effect of Slag Types and Melting Rate on Electro-Slag Remelting (ESR) Processing [Volume 2, Issue 1, 2005, Pages 37-42]
  • Meratian, M. Physical Modeling of Steel Delivery during Thin Slab Continuous Casting [Volume 5, Issue 1, 2008, Pages 41-46]
  • Meratian, M. The influence of TiO2 and Na2CO3 on the viscosity and crystallization behavior of mold powders [Volume 8, Issue 1, 2011, Pages 5-11]
  • Meratian, M. Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method [Volume 8, Issue 1, 2011, Pages 26-33]
  • Meysami, A. Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation [Volume 11, Issue 1, 2015, Pages 31-34]
  • Meysami, A. Comparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics [Volume 14, Issue 2, 2017, Pages 38-42]
  • Mills, KC. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]
  • Mir, S. M. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Mirdamadi, Sh. Investigation of Hardness and Impact Toughness of Zr-Microalloyed Cast Steel [Volume 2, Issue 1, 2005, Pages 26-30]
  • Mirhosseini, Seyed Hossein Effect of zirconia addition on the properties of dolomite magnesia refractories used in steel industries [Volume 18, Issue 1, 2021, Pages 33-43]
  • Mirjalili, H. R. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Mirzadeh, H. Microstructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures [Volume 13, Issue 1, 2016, Pages 38-44]
  • Mirzadeh, H. Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel [Volume 15, Issue 1, 2018, Pages 28-32]
  • Mirzadeh, H. Processing of Fine-Grained DP300/600 Dual Phase Steel from St12 Structural Steel by the Thermo-Mechanical Processing of Cold Rolling and Intercritical Annealing [Volume 15, Issue 2, 2018, Pages 12-17]
  • Moayerifar, E. Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening [Volume 9, Issue 2, 2012, Pages 5-8]
  • Modarresi, S. M. H. Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
  • Mohamadi, M. Development of Ultrafine Bainitic Structure in AISI 431 Stainless Steel [Volume 16, Issue 1, 2019, Pages 14-22]
  • MohammadNejad, M. Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel [Volume 15, Issue 1, 2018, Pages 9-18]
  • Mohammadpour, VM. Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
  • Mohrbacher, Hardy Niobium Alloyed High Strength Steels for Automotive Applications [Volume 3, Issue 1, 2006, Pages 13-19]
  • Mohseni, F. The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
  • Mohsenifar, Farhad Oxidation Behavior of AISI 316 Steel Coated with Ni-P-TiO2-Al2O3 Composite Coating [Volume 17, Issue 1, 2020, Pages 28-39]
  • Mokhtari, M. H. Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas [Volume 8, Issue 2, 2011, Pages 9-15]
  • Mokmeli, Mohammad Optimization of Blast Furnace through Reducing Coke Consumption and CO2 Emission using HSC Software [Volume 18, Issue 1, 2021, Pages 74-82]
  • Momeni Vesalian, H. The Effect of the Removal of Energy Subsidies in the Competitiveness of Iranian Steel Industries [Volume 10, Issue 2, 2013, Pages 36-41]
  • Monirvaghefi, S. M. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
  • Monir Vaghefi, S. M. The Effect of Erosion on Corrosion Protection Properties of Coal Tar Epoxy Coating [Volume 11, Issue 2, 2014, Pages 17-22]
  • Monshi, A. Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
  • Monshi, A. Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
  • Monshi, A. The influence of TiO2 and Na2CO3 on the viscosity and crystallization behavior of mold powders [Volume 8, Issue 1, 2011, Pages 5-11]
  • Monshi, A. Producing low fluorine mold powder by replacing CaF2 with Na2CO3, ZnO and Fe2O3 [Volume 8, Issue 1, 2011, Pages 12-18]
  • Monshi, A. The Effect of Carbon Nanoparticles and Calcined Alumina on Mechanical Properties and Corrosion Resistance Behavior of the Magnesia Carbon Refractories [Volume 11, Issue 2, 2014, Pages 23-27]
  • Monshi, A. The Role of SiC and Different Binders on Mechanical Strength and Compaction of Silica Based Refractories Materials [Volume 12, Issue 1, 2015, Pages 37-41]
  • Monshi, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Monshi, A. The Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization [Volume 13, Issue 1, 2016, Pages 20-26]
  • Monshi, A. Effects of Ferrosilicon Addition and Formation of Insitu SiC Nano-whiskers on MgO-C Refractories [Volume 14, Issue 1, 2017, Pages 38-43]
  • Monshi, A. The Role of Nano Sic Whiskers on the Strength and Density of Aluminum Silicate-SiC-C Compounds as a Reinforced Steel Refractory [Volume 14, Issue 2, 2017, Pages 43-48]
  • Monshi, Ahmad Reciprocal Relations in Glass-Making and Bond-Breaking Components in the Chemical Composition of Mould Powders [Volume 18, Issue 2, 2022, Pages 1-12]
  • Monshi, M. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Montazer Hojat, H. A Statistical Analysis of the Mechanical Properties of the Beam 14 in Lines 630 and 650 of Iran National Steel Industrial Group [Volume 13, Issue 2, 2016, Pages 40-45]
  • Moosalu, H. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
  • Moosavi nezhad, Mohsen Evaluation of Reduction of Electric Arc Furnace (EAF) Dust Using Volatile Matter of Non-Coking Coal [Volume 18, Issue 1, 2021, Pages 44-55]
  • Moradi, H. Wear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating [Volume 6, Issue 2, 2009, Pages 14-19]
  • Moshksar, M. M. Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test [Volume 9, Issue 1, 2012, Pages 15-19]
  • Mostaan, H. Tribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel [Volume 13, Issue 2, 2016, Pages 19-25]
  • Mostaan, H. Micro Laser Welding of AISI 430 Ferritic Stainless Steel: Mechanical Properties, Magnetic Characterization and Texture Evolution [Volume 14, Issue 2, 2017, Pages 1-8]
  • Mostaan, H. The Interface Structure in Dissimilar Welding of AISI 4130 to AISI 316L Steels Using ERNiCr-3 Filler Metal [Volume 15, Issue 1, 2018, Pages 1-8]
  • Mostafaei, M. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Mostafapour, A. Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel [Volume 13, Issue 2, 2016, Pages 1-6]
  • Mostafapour, A. The Effect of Two-stage Heat Treatment Temperatures on Initial and FSSWed Properties of TRIP Steels [Volume 14, Issue 1, 2017, Pages 1-9]
  • Movaghar Garabagh, M. R. X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels [Volume 7, Issue 2, 2010, Pages 18-20]

N

  • Naffakh, H. A Comparative Evaluation of Welding Consumables for Dissimilar Welds between 310 Austenitic Stainless Steel and Inconel 657 [Volume 4, Issue 1, 2007, Pages 39-49]
  • Naffakh, H. Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
  • Najafi, H. Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B [Volume 13, Issue 1, 2016, Pages 1-7]
  • Najafipour, D. Enhancement Wear Properties of HSS-M2 Tool Steel with WC Deposited by SMAW Process [Volume 16, Issue 2, 2019, Pages 1-8]
  • Najafizadeh, A Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map [Volume 1, Issue 1, 2004, Pages 1-7]
  • Najafizadeh, A Hot Charge of Continuously Cast Slabs in Reheating Furnaces [Volume 1, Issue 1, 2004, Pages 35-37]
  • Najafizadeh, A. The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel [Volume 3, Issue 1, 2006, Pages 1-7]
  • Najafizadeh, A. Dynamic Recrystallization by Necklace Mechanism During Hot Deformation of 316 Stainless Steel [Volume 4, Issue 1, 2007, Pages 16-23]
  • Najafizadeh, A. Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel [Volume 5, Issue 2, 2008, Pages 21-28]
  • Najafizadeh, A. Color metallography; a suitable method for characterization of martensite and bainite in multiphase steels [Volume 6, Issue 1, 2009, Pages 14-18]
  • Najafizadeh, A. Artificial neural network models for production of nano-grained structure in AISI 304L stainless steel by predicting thermo-mechanical parameters [Volume 6, Issue 2, 2009, Pages 6-13]
  • Najafizadeh, A. Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
  • Najafizadeh, A. Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel [Volume 8, Issue 1, 2011, Pages 1-4]
  • Najafizadeh, A. Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method [Volume 8, Issue 1, 2011, Pages 26-33]
  • Najafizadeh, A. The Effect of Niobium on the Formation of Nanostructured Low Carbon Steel Using Martensite Treatment [Volume 9, Issue 1, 2012, Pages 6-10]
  • Najafizadeh, A. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
  • Najafizadeh, A. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Najafizadeh, A. The Effect of Intercritical Annealing Time on the Microstructures and Mechanical Properties of an Ultrafine Grained Dual Phase Steel Containing Niobium [Volume 11, Issue 1, 2015, Pages 7-11]
  • Najafizadeh, A. Strain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel [Volume 13, Issue 2, 2016, Pages 26-30]
  • Najafizadeh, A. Prediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling [Volume 15, Issue 2, 2018, Pages 27-37]
  • Najafkhani, A. Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
  • Nategh, S. The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
  • Nategh, S. Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B [Volume 13, Issue 1, 2016, Pages 1-7]
  • Nateq, M. H. Quantitative measuring of pearlite in carbon steels using electromagnetic sensor [Volume 7, Issue 1, 2010, Pages 29-32]
  • Nemati, A. Effects of Cr2O3 on physical and mechanical properties of in-situ spinel containing castable [Volume 8, Issue 1, 2011, Pages 39-42]
  • Nematzadeh, F. Micro Laser Welding of AISI 430 Ferritic Stainless Steel: Mechanical Properties, Magnetic Characterization and Texture Evolution [Volume 14, Issue 2, 2017, Pages 1-8]
  • Ngan, A. H.W. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels [Volume 11, Issue 2, 2014, Pages 1-5]
  • Nikmanesh, S. Corrosion Resistance and Semiconducting Properties of the Passive Films on Duplex Stainless Steel 2205 [Volume 14, Issue 2, 2017, Pages 9-15]
  • Nikomanzari, E. The Effect of Chloride Ions Concentration on the Electrochemical Behavior of AISI 410 Stainless Steels in Simulated Concrete Pore Solution [Volume 11, Issue 1, 2015, Pages 35-40]
  • Nili-Ahmadabadi, M. Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel [Volume 16, Issue 1, 2019, Pages 1-8]
  • Niroumand, B. Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation [Volume 10, Issue 1, 2013, Pages 37-42]
  • Noori Teymorlu, A. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
  • Nourbakhsh, A. A. The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
  • Nourbakhsh, Amirabbas Relationship between steel shell temperature and nano MgCr2O4 addition on steel snorkel life time in Ruhrstahl-Heraeus vacuum steel refining units [Volume 18, Issue 1, 2021, Pages 11-22]
  • Nourbakhsh, M. Preparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel [Volume 13, Issue 2, 2016, Pages 31-39]
  • Nouroozi, M. Processing of Fine-Grained DP300/600 Dual Phase Steel from St12 Structural Steel by the Thermo-Mechanical Processing of Cold Rolling and Intercritical Annealing [Volume 15, Issue 2, 2018, Pages 12-17]

O

  • Obeydavi, Ali Investigation the effect of sol-gel method approach on microstructural of NiO/MgAl2O4 nanocatalysts applicable for steel industry: modified sol-gel method and sol-gel citrate [Volume 18, Issue 1, 2021, Pages 56-63]
  • Omidi, Zahra Investigating the impact of exchange rate and oil price fluctuations on Iran’s steel exports to China with sanctions in focus: A wavelet and multivariate-GARCH approach [Volume 18, Issue 1, 2021, Pages 98-105]

P

  • Paghandeh, M. Effect of Combining Hydraulic and Phosphate Bonds on Alumina-Spinel Low Cement Castables [Volume 5, Issue 1, 2008, Pages 31-35]
  • Palizdar, Y. The Influence of HH Type Steel Microstructure on the Distortion Behavior of Grate Bar Part in the Indurating Machine of Pelletizing Plant [Volume 13, Issue 2, 2016, Pages 7-12]
  • Panjehpour, Masoud Kinetics Analysis of X65 Steel corrosion reactions at the simultaneous presence of CO2 and H2S [Volume 17, Issue 1, 2020, Pages 40-56]
  • Panjepour, M. The effect of mechanical activation on the carbothermic reduction kinetics of hematite-graphite mixture [Volume 7, Issue 2, 2010, Pages 26-33]
  • Parastegari, M. The Effect of Carbon Nanoparticles and Calcined Alumina on Mechanical Properties and Corrosion Resistance Behavior of the Magnesia Carbon Refractories [Volume 11, Issue 2, 2014, Pages 23-27]
  • Parchami Borjoui Raky, Sirus Simulation of water-circulating path and heat transfer in blast-furnace tuyeres with simple and spiral double-chamfer design [Volume 17, Issue 1, 2020, Pages 21-27]
  • Parchami Borjoui Raky, Soroush Simulation of water-circulating path and heat transfer in blast-furnace tuyeres with simple and spiral double-chamfer design [Volume 17, Issue 1, 2020, Pages 21-27]
  • Parsapour, A. The Effect of Surface Treatment on Corrosion behavior of Surgical 316L Stainless Steel Implant [Volume 4, Issue 1, 2007, Pages 34-38]
  • Parvini Ahmadi, N. Shot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P [Volume 2, Issue 1, 2005, Pages 1-6]
  • Parvini Ahmadi, N. A Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel [Volume 2, Issue 2, 2005, Pages 19-23]
  • Parvini Ahmadi, N. An investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel [Volume 6, Issue 1, 2009, Pages 19-24]
  • Parvini Ahmadi, N. Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel [Volume 6, Issue 1, 2009, Pages 25-29]
  • Parvini Ahmadi, N. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
  • Parvini Ahmadi, N. Wear behavior of laser cladded Ni based-WC-La2O3 hybrid composite coating on H13-Steel at elevated and ambient temperatures [Volume 18, Issue 1, 2021, Pages 83-97]
  • Parvini-Ahmadi, N Electroless Deposition of Ni-Cu-P Alloy on 304 Stainless Steel by Using Thiourea and Gelatin as Additives and Investigation of Some Properties of Deposits [Volume 1, Issue 1, 2004, Pages 29-34]
  • Peyghambardoust, N. Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel [Volume 7, Issue 2, 2010, Pages 1-5]
  • Poorkabirian, M. The Interface Structure in Dissimilar Welding of AISI 4130 to AISI 316L Steels Using ERNiCr-3 Filler Metal [Volume 15, Issue 1, 2018, Pages 1-8]
  • Pourdavoud, F. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]
  • Purmohamad, H. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]

R

  • Rabani, M. High Temperature Oxidation Behavior of Aluminide Coating Fabricated on UNS S30815 Stainless Steel [Volume 16, Issue 1, 2019, Pages 41-50]
  • Rabbani, Yousef The factors affecting reverse supply chain and circular economy, Case study: Mobarakeh Steel Company [Volume 18, Issue 2, 2022, Pages 38-48]
  • Raeissi, K. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Rafiei, M. Tribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel [Volume 13, Issue 2, 2016, Pages 19-25]
  • Rafiei, M. The Interface Structure in Dissimilar Welding of AISI 4130 to AISI 316L Steels Using ERNiCr-3 Filler Metal [Volume 15, Issue 1, 2018, Pages 1-8]
  • Rafiei Borujeni, H. Dry Wear Behavior of 42CrMo4 Steel/ZrO2 Composite Prepared by Pressure-Less Infiltration Method [Volume 13, Issue 1, 2016, Pages 8-14]
  • Rafiezadeh, E. Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel [Volume 6, Issue 1, 2009, Pages 25-29]
  • Rahimi, P. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
  • Rahimipour, M. R. The Effect of Slag Types and Melting Rate on Electro-Slag Remelting (ESR) Processing [Volume 2, Issue 1, 2005, Pages 37-42]
  • Rahimzadeh, H. A. Comparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics [Volume 14, Issue 2, 2017, Pages 38-42]
  • Rainforth, W. M. Effect of NbMo Addition on the Precipitation Behaviour of V Microalloyed Steel during Intercritical Annealing [Volume 15, Issue 2, 2018, Pages 1-11]
  • Rajabi, D. Study on Static Recrystallization Process in Duplex Stainless Steel 2205 [Volume 8, Issue 2, 2011, Pages 20-23]
  • Rajaee, A. An Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment [Volume 15, Issue 2, 2018, Pages 18-26]
  • Rajaee, S. Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel [Volume 15, Issue 1, 2018, Pages 9-18]
  • Rakhshkhorshid, M. Neural Network Prediction of Warm Deformation Flow Curves in Ferrite+ Cementite Region [Volume 13, Issue 1, 2016, Pages 15-19]
  • Rakhshkhorshid, M. Exponential-type Constitutive Equation in Order to Use in Modeling the Warm Deformation of a Eutectoid Steel [Volume 13, Issue 2, 2016, Pages 13-18]
  • Ranjbar, Khalil Investigating the heat input effect of the GTAW process upon the microstructure and HAZ extension of HSLA-100 steel weld joints using thermal cycles [Volume 17, Issue 1, 2020, Pages 57-69]
  • Rastegari, H. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Rastegari, H. Neural Network Prediction of Warm Deformation Flow Curves in Ferrite+ Cementite Region [Volume 13, Issue 1, 2016, Pages 15-19]
  • Rastegari, H. Exponential-type Constitutive Equation in Order to Use in Modeling the Warm Deformation of a Eutectoid Steel [Volume 13, Issue 2, 2016, Pages 13-18]
  • Rastegari, H. Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel [Volume 15, Issue 2, 2018, Pages 45-53]
  • Rastegary, H. The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel [Volume 16, Issue 2, 2019, Pages 29-33]
  • Rastgoo, A. R. An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
  • Rasti, J. Dynamic Recrystallization by Necklace Mechanism During Hot Deformation of 316 Stainless Steel [Volume 4, Issue 1, 2007, Pages 16-23]
  • Rasti, J. Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method [Volume 8, Issue 1, 2011, Pages 26-33]
  • Rasti, J. Grain Size Effect on the Hot Deformation Processing Map of AISI 304 Austenitic Stainless Steel [Volume 15, Issue 2, 2018, Pages 54-61]
  • Rasti, M. An Investigation on Mold Powders Properties Consumed in Iran [Volume 4, Issue 1, 2007, Pages 50-54]
  • Raygan, S. The Effects of Volatile Materials of Non-coking Coal on the Reduction of Hematite [Volume 10, Issue 1, 2013, Pages 23-26]
  • Revie, R. W. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Rezaei, R. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Rezaeian, A. The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
  • Rezaeian, M. Automatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques [Volume 9, Issue 1, 2012, Pages 30-40]
  • Rezaye, A. Measurements of iron concentrate stockpile weight, from laser mapping to investigation of effective parameters on surface density [Volume 6, Issue 2, 2009, Pages 20-23]
  • Rounaghi, S. A. The effect of quenching media and annealing temperature on graphitization transformation kinetic of CK100 tool steel [Volume 8, Issue 1, 2011, Pages 34-38]

S

  • Saadati, M. H. The structure-property relationship in a desulfurised and degassing hot work W500 tool steel [Volume 8, Issue 1, 2011, Pages 19-25]
  • Saatchi, A. The Effect of Surface Treatment on Corrosion behavior of Surgical 316L Stainless Steel Implant [Volume 4, Issue 1, 2007, Pages 34-38]
  • Saatchi, A. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Saatchi, A. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating [Volume 9, Issue 1, 2012, Pages 1-5]
  • Sabet, H. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel [Volume 12, Issue 1, 2015, Pages 1-8]
  • Saboonchi, A. Simulation of Temperature Distribution in Hot Strip over Transfer Table [Volume 3, Issue 1, 2006, Pages 26-32]
  • Saboonchi, A. Significance of Heat Conduction Parameter along the Rolling Direction in the Thermal Modeling of the Hot Rolling Process [Volume 4, Issue 1, 2007, Pages 1-7]
  • Saboonchi, A. Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method [Volume 5, Issue 1, 2008, Pages 1-7]
  • Saboonchi, Ahmad The Effect of Header Geometry on Temperature Distribution in Cold Rolling [Volume 2, Issue 2, 2005, Pages 24-29]
  • Sabooni, S. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels [Volume 11, Issue 2, 2014, Pages 1-5]
  • Sabzevari Zadeh, A. A general model for production-transportation planning in steel supply chain [Volume 7, Issue 1, 2010, Pages 11-16]
  • Sadeghi, B. An Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment [Volume 15, Issue 2, 2018, Pages 18-26]
  • Sadeghi, Mojtaba Investigation of the Effect of the Efficiency of Catalysts on Early Destruction of Direct Reduction Reformer Tubes. [Volume 17, Issue 2, 2020, Pages 34-39]
  • Sadeghi, Mojtaba Investigation of Corrosion Behavior of Drain Pipes of Process Compressors in Direct Reduction Unit. [Volume 17, Issue 2, 2020, Pages 40-45]
  • Sadeghpour, S. Developing Very Fine Nanopearlitic Structure in a High Carbon Steel Wire before Drawing [Volume 8, Issue 2, 2011, Pages 1-4]
  • Saeedipour, S. The Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel [Volume 9, Issue 1, 2012, Pages 20-25]
  • Saeedipour, S. The Effects of Nitrogen Addition on the Production of Ultrafine/Nano Grained AISI 201L Stainless Steel by Advanced Thermo-mechanical Process [Volume 9, Issue 2, 2012, Pages 9-13]
  • Saeid, T. Shot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P [Volume 2, Issue 1, 2005, Pages 1-6]
  • Saeidi, A. The Effect of Binder Type on the Properties of Briquette and Pellet Produced from the Magnetite Concentrate of Gol-E-Gohar Iron-Ore [Volume 10, Issue 1, 2013, Pages 34-36]
  • Saeidi, N. Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation [Volume 10, Issue 1, 2013, Pages 37-42]
  • Saeri, M.R. The Effect of Ferrite Grain Size on the Fatigue Behavior of Ferrite-martensite Dual-phase Steels [Volume 11, Issue 2, 2014, Pages 11-16]
  • Safari, M. Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method [Volume 5, Issue 1, 2008, Pages 1-7]
  • Safari, M. Surface Quality in Dry Machining of 55Cr3 Steel Bars [Volume 15, Issue 1, 2018, Pages 33-39]
  • Safari, M. Experimental Investigation of Resistance Spot Welding of Ultrathin IF Steel Sheets [Volume 16, Issue 1, 2019, Pages 51-57]
  • Safarkhanian, M. A. Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B [Volume 13, Issue 1, 2016, Pages 1-7]
  • Safavi, Mir Saman A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Saffari, Hamed Effect of Tempering Treatment on Microstructure and Mechanical properties of the HSLA-100 steel [Volume 18, Issue 1, 2021, Pages 1-10]
  • Saha-Chaudhury, N. Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process [Volume 3, Issue 2, 2006, Pages 34-42]
  • Sahajwalla, V. Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process [Volume 3, Issue 2, 2006, Pages 34-42]
  • Sahraeian, R. A general model for production-transportation planning in steel supply chain [Volume 7, Issue 1, 2010, Pages 11-16]
  • Saidi, A Hyperactivation of Bentonite in Pelletizing Process [Volume 1, Issue 1, 2004, Pages 38-41]
  • Saidi, A. Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry [Volume 6, Issue 1, 2009, Pages 9-13]
  • Saidi, A. Measurements of iron concentrate stockpile weight, from laser mapping to investigation of effective parameters on surface density [Volume 6, Issue 2, 2009, Pages 20-23]
  • Saidi, A. The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
  • Saidi, A. Producing low fluorine mold powder by replacing CaF2 with Na2CO3, ZnO and Fe2O3 [Volume 8, Issue 1, 2011, Pages 12-18]
  • Saidi, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Saidi, A. The Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization [Volume 13, Issue 1, 2016, Pages 20-26]
  • Saidi, Ali Reciprocal Relations in Glass-Making and Bond-Breaking Components in the Chemical Composition of Mould Powders [Volume 18, Issue 2, 2022, Pages 1-12]
  • Saied, T. Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel [Volume 13, Issue 2, 2016, Pages 1-6]
  • Sajjadnejad, M. The Inhibition Effect of Polyethylenimine (PEI) on Pitting Corrosion of 304 Austenitic Stainless Steel in 3.5% NaCl Solution [Volume 10, Issue 1, 2013, Pages 14-22]
  • Saleh, M. Investigation of Hardness and Impact Toughness of Zr-Microalloyed Cast Steel [Volume 2, Issue 1, 2005, Pages 26-30]
  • Salehi, F. Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process [Volume 16, Issue 2, 2019, Pages 42-49]
  • Salehi, M. The Effect of Surface Treatment on Corrosion behavior of Surgical 316L Stainless Steel Implant [Volume 4, Issue 1, 2007, Pages 34-38]
  • Salehi, M. The Effect of Ferrite Grain Size on the Fatigue Behavior of Ferrite-martensite Dual-phase Steels [Volume 11, Issue 2, 2014, Pages 11-16]
  • Salehi, M. Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing [Volume 12, Issue 1, 2015, Pages 16-20]
  • Salehi, M. Dry Wear Behavior of 42CrMo4 Steel/ZrO2 Composite Prepared by Pressure-Less Infiltration Method [Volume 13, Issue 1, 2016, Pages 8-14]
  • Salehi, M. Tribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel [Volume 13, Issue 2, 2016, Pages 19-25]
  • Salehian, A. Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
  • Salimijazi, H. R. Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
  • Samadi Shahreza, Z. Improving the Microstructure, Mechanical and Magnetic Properties of AISI 4340 Steel Using the Heat Treatment Process [Volume 10, Issue 2, 2013, Pages 18-22]
  • Sanati, A. Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating [Volume 12, Issue 2, 2015, Pages 7-16]
  • Sarpoolaky, H. Effects of Cr2O3 on physical and mechanical properties of in-situ spinel containing castable [Volume 8, Issue 1, 2011, Pages 39-42]
  • Sehri, S.M. Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel [Volume 12, Issue 2, 2015, Pages 17-23]
  • Seied-Hamzeh, Jafar A Detailed Failure Analysis of Vertically Suspended Diffuser Pump Caused by Hex Head Bolt Fracture: The Marine Service Condition [Volume 17, Issue 2, 2020, Pages 14-24]
  • Sepehrzad, R. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Shafiei, A. The Effect of Binder Type on the Properties of Briquette and Pellet Produced from the Magnetite Concentrate of Gol-E-Gohar Iron-Ore [Volume 10, Issue 1, 2013, Pages 34-36]
  • Shafiei, A. Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel [Volume 12, Issue 1, 2015, Pages 21-27]
  • Shafieirad, A. The Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization [Volume 13, Issue 1, 2016, Pages 20-26]
  • Shafierad, A. The Impact of MnO, Li2O, ZnO and TiO2 on Mold Powders Viscosity Using Hot Stage Microscope Analysis [Volume 12, Issue 2, 2015, Pages 39-45]
  • Shafyei, A. Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process [Volume 3, Issue 2, 2006, Pages 7-16]
  • Shafyei, A. Recovery of Vanadium from Esfahan Steel Company Steel Slag; Optimizing of Roasting and Leaching Parameters [Volume 3, Issue 2, 2006, Pages 17-21]
  • Shafyei, A. The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel [Volume 7, Issue 2, 2010, Pages 12-17]
  • Shafyei, A. Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels [Volume 9, Issue 2, 2012, Pages 32-38]
  • Shafyei, A. Evaluation of Heat Treatments and Their Effects on the Corrosion Behavior of TiAlON Coatings Prepared by Cathodic Arc Evaporation on D3 Tool Steel [Volume 10, Issue 1, 2013, Pages 1-6]
  • Shafyei, A. Production and Crystallization Behavior of an Iron Rich Glass–Ceramic Prepared by Ironmaking and Steelmaking Wastes [Volume 14, Issue 1, 2017, Pages 17-22]
  • Shafyei, A. Kinetics of Ceramic Phase Crystallization in a Glass Derived from Wastes of Iron and Steel Industry [Volume 16, Issue 2, 2019, Pages 21-28]
  • Shafyei, H. The Effect of Deep Cryogenic Treatment on Microstructure, Hardness and Wear Behavior of INDRA 5 Cold Work Tool Steel [Volume 15, Issue 2, 2018, Pages 38-44]
  • Shafyei, Hassan Investigation the effect of sol-gel method approach on microstructural of NiO/MgAl2O4 nanocatalysts applicable for steel industry: modified sol-gel method and sol-gel citrate [Volume 18, Issue 1, 2021, Pages 56-63]
  • Shahabi, S. Evaluation of Heat Treatments and Their Effects on the Corrosion Behavior of TiAlON Coatings Prepared by Cathodic Arc Evaporation on D3 Tool Steel [Volume 10, Issue 1, 2013, Pages 1-6]
  • Shahmohammadi, M. An Investigation of Casting Defects Revealed in Forming Process of USD7 Steel [Volume 3, Issue 2, 2006, Pages 29-33]
  • Shakiba, A. The Layered Reduction of Hematite (Iron Oxide) Ore by Non-Coking Coal: The Effect of Calcium Carbonate on Reduction [Volume 10, Issue 2, 2013, Pages 23-29]
  • Shamanian, M Hot Charge of Continuously Cast Slabs in Reheating Furnaces [Volume 1, Issue 1, 2004, Pages 35-37]
  • Shamanian, M Hyperactivation of Bentonite in Pelletizing Process [Volume 1, Issue 1, 2004, Pages 38-41]
  • Shamanian, M. A Comparative Evaluation of Welding Consumables for Dissimilar Welds between 310 Austenitic Stainless Steel and Inconel 657 [Volume 4, Issue 1, 2007, Pages 39-49]
  • Shamanian, M. Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 [Volume 5, Issue 1, 2008, Pages 15-21]
  • Shamanian, M. Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657 [Volume 5, Issue 1, 2008, Pages 22-30]
  • Shamanian, M. Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry [Volume 6, Issue 1, 2009, Pages 9-13]
  • Shamanian, M. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Shamanian, M. Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW) [Volume 6, Issue 2, 2009, Pages 34-37]
  • Shamanian, M. The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds [Volume 9, Issue 2, 2012, Pages 14-18]
  • Shamanian, M. Evaluation of the Melted Zone Microstructure in the Interface of the Dissimilar Weld between A335 Low Alloy Steel and ER309L Filler Metal by Gas Tungsten Arc Welding [Volume 11, Issue 2, 2014, Pages 6-10]
  • Shamanian, M. Tribological Properties of B4C-Ni Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel [Volume 13, Issue 2, 2016, Pages 19-25]
  • Shamanian, Morteza Gas Tungsten Arc Welding of HP Heat Resistant Steel with 25Cr-35Ni and 35Cr-45Ni Filler Metals [Volume 18, Issue 2, 2022, Pages 30-37]
  • Sharafi, S. Analyzing the Failure of Master Mould in Casting of Copper Anode Moulds and Suggesting a more Suitable Metal Mould [Volume 3, Issue 1, 2006, Pages 33-42]
  • Sharifi, H. A Predictive Model Accounting for the Mechanical Behavior of Galvanized Alloy Layers on the Mild Steel [Volume 11, Issue 1, 2015, Pages 12-17]
  • Sharifi, H. The Effect of Ferrite Grain Size on the Fatigue Behavior of Ferrite-martensite Dual-phase Steels [Volume 11, Issue 2, 2014, Pages 11-16]
  • Sharifi, H. A Study on the Mechanical Properties of Dual Phase Steels Prepared by the Direct and Step Quenching Procedure [Volume 11, Issue 2, 2014, Pages 28-33]
  • Sharifi, H. The Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel [Volume 12, Issue 1, 2015, Pages 9-15]
  • Sharifi, H. Dry Wear Behavior of 42CrMo4 Steel/ZrO2 Composite Prepared by Pressure-Less Infiltration Method [Volume 13, Issue 1, 2016, Pages 8-14]
  • Sharifi, H. An Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment [Volume 15, Issue 2, 2018, Pages 18-26]
  • Sharifi, Leila Effect of zirconia addition on the properties of dolomite magnesia refractories used in steel industries [Volume 18, Issue 1, 2021, Pages 33-43]
  • Sharifi, Mohammad Simulation of water-circulating path and heat transfer in blast-furnace tuyeres with simple and spiral double-chamfer design [Volume 17, Issue 1, 2020, Pages 21-27]
  • Sheibani, Saeed Optimization of Blast Furnace through Reducing Coke Consumption and CO2 Emission using HSC Software [Volume 18, Issue 1, 2021, Pages 74-82]
  • Sheikhi, Mohsen Resistance Spot Welding of Steels: Modeling and Simulation [Volume 14, Issue 1, 2017, Pages 10-16]
  • Shekari, H. The Effect of Deformation Temperature on the Mechanical Properties and Microstructural Evolutions of High Manganese TWIP Steel [Volume 10, Issue 2, 2013, Pages 7-10]
  • Shirani, A. Effect of aging temperature on structural evolution of HP-Nb heat resistant steel [Volume 6, Issue 1, 2009, Pages 30-33]
  • Shoja Razavi, R. Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening [Volume 9, Issue 2, 2012, Pages 5-8]
  • Shokuhfar, A. The Effect of Slag Types and Melting Rate on Electro-Slag Remelting (ESR) Processing [Volume 2, Issue 1, 2005, Pages 37-42]
  • Shokuhfar, A. Dynamic Recrystallization under Hot Deformation of a PH Stainless Steel [Volume 3, Issue 1, 2006, Pages 8-12]
  • Shokuhfar, A. Evaluation of Deoxidation Process in Medical Grade of 316L Stainless Steel [Volume 3, Issue 2, 2006, Pages 22-28]
  • Siadati, S. S. Hot Corrosion of Slag Line in Plaster of Tundish in Continuous Casting of Steel [Volume 5, Issue 2, 2008, Pages 36-44]
  • Sohrabi, Habib Using the artificial neural network to investigate the effect of parameters in square cup deep drawing of aluminum-steel laminated sheets [Volume 17, Issue 2, 2020, Pages 1-13]
  • Sohrabi, M. A. An investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel [Volume 6, Issue 1, 2009, Pages 19-24]
  • Soleimani Amiri, B. Recrystallization Behavior of Deep Drawing Low Carbon Steel Sheets Produced by Mobarakeh Steel Plant [Volume 2, Issue 2, 2005, Pages 36-42]
  • Solhjoo, S. Characteristic Points of Stress-Strain Curve at High Temperature [Volume 4, Issue 1, 2007, Pages 24-27]
  • Soltan Attar, S. The influence of TiO2 and Na2CO3 on the viscosity and crystallization behavior of mold powders [Volume 8, Issue 1, 2011, Pages 5-11]
  • Soltani, I. Developing and Validating the Excellence Model for the Strategic Knowledge Management Case Study: Mobarakeh Steel Company [Volume 14, Issue 1, 2017, Pages 44-49]
  • Soltani, M. A. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Soltanieh, M. An Investigation of Casting Defects Revealed in Forming Process of USD7 Steel [Volume 3, Issue 2, 2006, Pages 29-33]
  • Sonboli, A The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]
  • Souri, A. R. Effects of Cr2O3 on physical and mechanical properties of in-situ spinel containing castable [Volume 8, Issue 1, 2011, Pages 39-42]
  • Szpunar, J. A. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]

T

  • Taghiabadi, Reza Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel [Volume 17, Issue 1, 2020, Pages 1-10]
  • Tagimalek, Hadi The effects of diffusion depth and heat-affected zone in NE-GMAW process on SUH 310S steel using an Image processing method [Volume 17, Issue 1, 2020, Pages 11-20]
  • Tagimalek, Hadi Using the artificial neural network to investigate the effect of parameters in square cup deep drawing of aluminum-steel laminated sheets [Volume 17, Issue 2, 2020, Pages 1-13]
  • Taheri, A. M. The effective parameters on thermal recovery and reduction of iron oxides in EAF slag [Volume 7, Issue 1, 2010, Pages 25-29]
  • Taherizadeh, A. Improving the Microstructure, Mechanical and Magnetic Properties of AISI 4340 Steel Using the Heat Treatment Process [Volume 10, Issue 2, 2013, Pages 18-22]
  • Tajally, M. The Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel [Volume 16, Issue 2, 2019, Pages 29-33]
  • Takaki, Setsuo Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron [Volume 2, Issue 1, 2005, Pages 21-25]
  • Talebi, Amir Effect of tempering temperature on microstructure and work hardening behavior of a triple-phase AISI 4140 steel [Volume 18, Issue 2, 2022, Pages 23-29]
  • Tamizifar, M. Investigation of Hardness and Impact Toughness of Zr-Microalloyed Cast Steel [Volume 2, Issue 1, 2005, Pages 26-30]
  • Tavakoli, A. The Effect of Time on the Formation & Growth of Passive Layer on Carbon Steel A516 Gr. 70 in Sour Water [Volume 4, Issue 1, 2007, Pages 28-33]
  • Tavakoli, Hossein Effects of Addition of Waste Toner Particles on Tribological Properties of Ni-P Coatings Before and After Heat Treatment [Volume 18, Issue 1, 2021, Pages 23-32]
  • Tavakoli Shoushtari, M. R. Effect of ageing heat treatment on corrosion behaviorof 17-4 PH stainless steel in 3.5% NaCl [Volume 7, Issue 1, 2010, Pages 33-36]
  • Tavoosi, M. Preparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel [Volume 13, Issue 2, 2016, Pages 31-39]
  • Tavoosi, M. Development of Ultrafine Bainitic Structure in AISI 431 Stainless Steel [Volume 16, Issue 1, 2019, Pages 14-22]
  • Tayyebi, Abdollah Investigation the effect of sol-gel method approach on microstructural of NiO/MgAl2O4 nanocatalysts applicable for steel industry: modified sol-gel method and sol-gel citrate [Volume 18, Issue 1, 2021, Pages 56-63]
  • Tayyebi, M. Mathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet [Volume 15, Issue 1, 2018, Pages 49-53]
  • Torbat, S. Steel Consumption Forecasting Using Nonlinear Pattern Recognition Model Based on Self-Organizing Maps [Volume 14, Issue 1, 2017, Pages 30-37]
  • Toroghinejad, M. Effect of Ti-microalloy Addition on the Formability and Mechanical Properties of a Low Carbon (ST14) Steel [Volume 3, Issue 2, 2006, Pages 1-6]
  • Toroghinejad, M. R. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel [Volume 12, Issue 2, 2015, Pages 1-6]
  • Torshizi, Hojjat Modeling of weld bead geometry and optimization of GMAW welding parameters on CK45 steel [Volume 18, Issue 1, 2021, Pages 113-123]

U

  • Usefifar, G.R. Resistance Spot Welding of Steels: Modeling and Simulation [Volume 14, Issue 1, 2017, Pages 10-16]

V

  • Vahdati Khaki, J. An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals [Volume 5, Issue 1, 2008, Pages 8-14]
  • Vahdati Khaki, J. Thermodynamic Simulation of Gas Carburizing of Steels [Volume 5, Issue 2, 2008, Pages 8-13]
  • Vahdati Khaki, J. The Effects of Volatile Materials of Non-coking Coal on the Reduction of Hematite [Volume 10, Issue 1, 2013, Pages 23-26]
  • Vahdati-Khaki, J. The Layered Reduction of Hematite (Iron Oxide) Ore by Non-Coking Coal: The Effect of Calcium Carbonate on Reduction [Volume 10, Issue 2, 2013, Pages 23-29]
  • Vahdati-Khaki, J. Application of Response Surface Methodology to Assess the Combined Effect of Operating Variables on the Direct Reduction of Fe2O3 by Coal Volatiles [Volume 11, Issue 1, 2015, Pages 24-30]
  • Vahid dastjerdi, H. Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350 [Volume 7, Issue 1, 2010, Pages 17-20]
  • Valaee, M. Resistance Spot Welding of Steels: Modeling and Simulation [Volume 14, Issue 1, 2017, Pages 10-16]
  • Valipour, M. S. Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas [Volume 8, Issue 2, 2011, Pages 9-15]
  • Vercammen, S. Detailed Microstructural Evolutions of TWIP Steel During Tensile Straining: In situ SEM Observations [Volume 11, Issue 2, 2014, Pages 34-36]
  • Vercammen, S. Observation of Stacking Fault Tetrahedral in TWIP Steel [Volume 12, Issue 2, 2015, Pages 46-49]

W

  • Wang, T. S. The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]

Y

  • Yan, T. Strain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel [Volume 13, Issue 2, 2016, Pages 26-30]
  • Yang, Fu-Bao The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Yang, Zhi-Gang The Developing Prospect of Air-cooled Bainitic Steels [Volume 2, Issue 2, 2005, Pages 9-18]
  • Yazdani, S. Shot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P [Volume 2, Issue 1, 2005, Pages 1-6]
  • Yazdani, S. The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]
  • Yazdani, S. Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel [Volume 9, Issue 1, 2012, Pages 11-14]
  • Yazdani, S. Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process [Volume 14, Issue 2, 2017, Pages 27-32]
  • Yazdani, S. Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel [Volume 16, Issue 1, 2019, Pages 9-13]
  • Yazdani, Sasan Wear behavior of laser cladded Ni based-WC-La2O3 hybrid composite coating on H13-Steel at elevated and ambient temperatures [Volume 18, Issue 1, 2021, Pages 83-97]
  • Yoozbashi, M. N. The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels [Volume 7, Issue 2, 2010, Pages 6-11]
  • Yoozbashi, M. N. Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel [Volume 16, Issue 1, 2019, Pages 9-13]
  • Yoozbashi, M. N. Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process [Volume 14, Issue 2, 2017, Pages 27-32]
  • Yoozbashi, M. N. Fatigue Behavior Optimization of the 16MnCr5 Steel Used in Machine Tool Spindle via Different Surface Treatments [Volume 16, Issue 2, 2019, Pages 9-15]

Z

  • Zabet, A. The Layered Reduction of Hematite (Iron Oxide) Ore by Non-Coking Coal: The Effect of Calcium Carbonate on Reduction [Volume 10, Issue 2, 2013, Pages 23-29]
  • Zabet, A. Application of Response Surface Methodology to Assess the Combined Effect of Operating Variables on the Direct Reduction of Fe2O3 by Coal Volatiles [Volume 11, Issue 1, 2015, Pages 24-30]
  • Zakeri, M Production of Fe-C Powders with Improved Structure [Volume 1, Issue 1, 2004, Pages 24-28]
  • Zakerinia, H. Color metallography; a suitable method for characterization of martensite and bainite in multiphase steels [Volume 6, Issue 1, 2009, Pages 14-18]
  • Zamani, M. R. Application of Polymeric Quenchants in Heat Treatment of Steels [Volume 6, Issue 1, 2009, Pages 34-38]
  • Zamani, M. Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel [Volume 15, Issue 1, 2018, Pages 28-32]
  • Zamani, M. Processing of Fine-Grained DP300/600 Dual Phase Steel from St12 Structural Steel by the Thermo-Mechanical Processing of Cold Rolling and Intercritical Annealing [Volume 15, Issue 2, 2018, Pages 12-17]
  • Zandrahimi, .M. Oxidation Behavior of AISI 430 Ferritic Stainless Steel Coated with Ni-Co-TiO2 [Volume 16, Issue 2, 2019, Pages 34-41]
  • Zandrahimi, M. Oxidation behavior and electrical Characteristics of used interconnects in solid oxide fuel cells at presence of Mn3O4 and MnFe2O4 coatings [Volume 6, Issue 2, 2009, Pages 24-27]
  • Zandrahimi, M. High Temperature Oxidation Behavior of Aluminide Coating Fabricated on UNS S30815 Stainless Steel [Volume 16, Issue 1, 2019, Pages 41-50]
  • Zangeneh-Madar, K. Evaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals [Volume 7, Issue 2, 2010, Pages 21-25]
  • Zare, M. Application of Response Surface Methodology to Assess the Combined Effect of Operating Variables on the Direct Reduction of Fe2O3 by Coal Volatiles [Volume 11, Issue 1, 2015, Pages 24-30]
  • Zarei, S. The Effects of Inhomogeneous Mechanical Properties of the Ferrite Phase on Dual Phase Steel’s Behavior [Volume 13, Issue 1, 2016, Pages 27-37]
  • Zarei-Hanzaki, A. Effect of Deformation Temperature on the Mechanical Behavior of a New TRIP/TWIP Steel Containing 21% Manganese [Volume 8, Issue 2, 2011, Pages 16-19]
  • Zarfeshani, Zahra The factors affecting reverse supply chain and circular economy, Case study: Mobarakeh Steel Company [Volume 18, Issue 2, 2022, Pages 38-48]
  • Zhaleh, Z. Oxidation Behavior of AISI 430 Ferritic Stainless Steel Coated with Ni-Co-TiO2 [Volume 16, Issue 2, 2019, Pages 34-41]
  • Zheng, W. Stress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments [Volume 3, Issue 1, 2006, Pages 20-25]
  • Zirehpour, Gh. Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening [Volume 9, Issue 2, 2012, Pages 5-8]