@article { author = {Jafarzadegan, Mostafa and Ahangaryan, Majid and Taghiabadi, Reza}, title = {Heat Input Effect on Microstructure and Mechanical Properties in Shielded Metal Arc Welding of Dissimilar AISI 316L/St-37 Steel}, journal = {International Journal of Iron & Steel Society of Iran}, volume = {17}, number = {1}, pages = {1-10}, year = {2021}, publisher = {Iron & Steel Society of Iran}, issn = {2981-0388}, eissn = {2981-0396}, doi = {10.22034/ijissi.2021.243773}, abstract = {Joining of stainless steels to carbon steels is one of the most widely used types of dissimilar joints. In this research, the microstructure and mechanical properties of dissimilar shielded metal arc welding of austenitic stainless steel AISI 316L to carbon steel St-37 is studied. This joining has made by E316L electrode and three heat inputs of 0.72, 0.84 and 1.0 kJ/mm. The microstructure of the joints was characterized by optical and scanning electron microscopy. The mechanical properties of the joints were evaluated by tensile and microhardness tests. The solidification microstructure of the weld metals contained mainly austenite and some skeletal delta ferrite. There was an epitaxial growth at the interface of the weld metal with the AISI 316L steel HAZ, and at the interface of the weld metal with the St-37 HAZ, there is an un-etched narrow area which is suggested to have austenitic-martensitic structure. The results of hardness tests showed that the hardnessof the interface of the weld metal with the St-37 steel was maximum which is attributed to the formation of the martensitic narrow band. The longitudinal tensile results showed that the increasing of the heat input decreaes the tensile strength and increases the elongation of the joints.}, keywords = {St-37 steel,AISI 316L stainless steel,Dissimilar Welding,Microstructure,tensile properties}, title_fa = {اثر حرارت ورودی بر ریزساختار و خواص مکانیکی جوشکاری قوس فلزی تحت گاز محافظ غیرهمجنس فولاد AISI 316L/St-37}, abstract_fa = {اتصال غیرهمجنس فولادهای زنگ نزن به فولادهای کربنی یکی از انواع پرکاربرد اتصالهای غیرهمجنس است. در این تحقیق، ریزساختار و خواص مکانیکی SMAW غیرهمجنس فولاد زنگ‌نزن آستنیتی AISI 316L به فولاد کم‌کربن St-37 بررسی شده است. اتصالها توسط الکترود E316L و تحت سه حرارت ورودی مختلف 72/0، 84/0 و kJ mm-1 1 انجام شد. ریزساختار اتصالها توسط میکروسکوپ نوری و میکروسکوپ الکترونی روبشی بررسی شد. خواص مکانیکی اتصالها نیز به وسیله آزمون کشش و سختی‌سنجی مورد بررسی قرار گرفت. ریزساختار انجمادی فلز جوش عمدتاً شامل آستنیت به همراه مقدار اندکی فریت دلتای اسکلتی بود. در فصل مشترک فلز جوش با ناحیه متاثر از حرارت فولاد AISI 316L، رشد همبافته مشاهده شد و در فصل مشترک فلز جوش با ناحیه متاثر از حرارت فولاد St-37، ناحیه‌ باریک اچ نشده‌ای وجود دارد که به نظر می‌رسد ساختار آستنیتی-مارتنزیتی دارد. نتایج آزمون سختی نشان داد که سختی فصل مشترک فلز جوش با فولاد St-37 حداکثر سختی را دارد که به تشکیل نوار باریک مارتنزیتی نسبت داده می‌شود. نتایج آزمون کشش مشخص کرد که افزایش حرارت ورودی استحکام کششی را کاهش داده و ازدیاد طول اتصالها را افزایش می‌دهد.}, keywords_fa = {فولاد St-37,فولاد زنگ نزن AISI 316L,جوشکاری غیرهمجنس,ریزساختار,خواص کششی}, url = {https://journal.issiran.com/article_243773.html}, eprint = {https://journal.issiran.com/article_243773_d0b58c3871bcab22712e902b63aefd61.pdf} }