1. Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map

Volume 1, Issue 1, Summer and Autumn 2004, Page 1-7

R Ebrahimi; A Najafizadeh


2. Shot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P

Volume 2, Issue 1, Winter and Spring 2005, Page 1-6

T. Saeid; S. Yazdani; N. Parvini Ahmadi


3. Carbide Precipitation in the Microstructures of Austempered Ductile Irons Containing 0.48% and 4.88% Al

Volume 2, Issue 2, Summer and Autumn 2005, Page 1-8

A. R. Kiani-Rashid; D. V. Edmonds


4. The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel

Volume 3, Issue 1, Winter and Spring 2006, Page 1-7

A. Najafizadeh; J. J. Jonas


9. Chemical energy and bottom stirring systems – Cost effective solutions for a better performing EAF

Volume 6, Issue 1, Winter and Spring 2009, Page 1-8

M. Kirschen; K. Badr; J. Cappel


12. Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel

Volume 7, Issue 2, Summer and Autumn 2010, Page 1-5

M. Azadbeh; N. Peyghambardoust; VM. Mohammadpour; A. Kalantari


13. Effect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel

Volume 8, Issue 1, Summer and Autumn 2011, Page 1-4

M. M. Karkeh Abadi; A. Najafizadeh; A. Kermanpur; Y. Mazaheri


15. The Effect of the Carbon Nanotube Content on the Corrosion Behaviour of Ni-P-CNT Composite Coating

Volume 9, Issue 1, Summer and Autumn 2012, Page 1-5

M. Alishahi; S. M. Monirvaghefi; A. Saatchi


18. Electrochemical Characterization of a Martensitic Stainless Steel

Volume 10, Issue 2, Summer and Autumn 2013, Page 1-6

A. Fattah-alhosseini


19. The Effect of Inclusions on Through-thickness Directional Fatigue Behavior of S355N Steel Plate

Volume 11, Issue 1, Winter and Spring 2015, Page 1-6

A. Abyazi; A. R. Ebrahimi


20. Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels

Volume 11, Issue 2, Winter and Spring 2014, Page 1-5

S. Sabooni; Z. Aghaei; F. Karimzadeh; M. H. Enayati; A. H.W. Ngan


21. Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel

Volume 12, Issue 1, Summer and Autumn 2015, Page 1-8

K. Amini; A. Bahrami; H. Sabet


22. The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel

Volume 12, Issue 2, Summer and Autumn 2015, Page 1-6

A Sonboli; M. R. Toroghinejad; H. Edris; J. A. Szpunar


23. Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B

Volume 13, Issue 1, Winter and Spring 2016, Page 1-7

A. H. Madadian; H. Najafi; M. A. Safarkhanian; S. Nategh


24. The Influence of HH Type Steel Microstructure on the Distortion Behavior of Grate Bar Part in the Indurating Machine of Pelletizing Plant

Articles in Press, Accepted Manuscript, Available Online from 26 December 2016

M. Alizadeh; Y. Palizdar


25. Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel

Volume 13, Issue 2, Summer and Autumn 2016, Page 1-6

A. Mostafapour; A. Ebrahimpour; T. Saied